mirror controls INFINITI QX50 2016 Quick Reference Guide

4
Blind Spot Warning (BSW) (if so equipped)
The BSW system alerts the driver when another
vehicle moves into the vehicle’s detection area.

An indicator light located near the outside mirrors 1
will illuminate if the radar sensors detect a vehicle in
the detection zone.

Push the warning system switch 2 to temporarily
turn the system off. When the system is off, the
indicator light
3 on the switch is off.

The indicator light 3 will also be off if all of the
warning systems are deactivated by pressing and
holding down the warning system switch
2 for
4 seconds.

The indicator light 3 will illuminate after the ignition
switch is ON and the BSW system is enabled.
For more information, refer to the “Instruments and controls (section 2)”
and the “Starting and driving (section 5)” of your Owner’s Manual.
new system features
1
2
3
2128163_16b_QX50_US_pQRG_091515.indd 49/15/15 2:54 PM

9
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.

Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the adjusting switches fo\
r each feature.
• Push the SET switch, and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preferences.

These memorized positions can also be linked to your INFINITI Intelligen\
t Key.

To link a memorized position to your INFINITI Intelligent Key, press the\
button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Heated Seats
The front seats can be warmed by built-in heaters.
The heated seat switches
1 are located on the
center console and can be operated independently
of each other.

The heater is controlled by a thermostat,
automatically turning the heater on and off. The
indicator light will remain on as long as the switch is on.

To turn on the heater, turn the control knob to the right until you have\
reached the desired
heat range.

To turn off the heater, return the control knob to the OFF position.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
2128163_16b_QX50_US_pQRG_091515.indd 99/15/15 2:55 PM

13
4 DEFROSTING FRONT AND SIDE WINDOWS

Press the front defroster button to turn the system on. The A/C automatically turns on
when the front defroster mode is selected. This feature removes humidity\
from the air.

Turn the temperature control dial 1 to set the desired temperature.

To defrost the front and side windows quickly, set the temperature contr\
ols and fan
speed controls to their maximum settings.
5 MODE BUTTON

Press the MODE button to cycle through the following air flow outlets:

Air flows from the center and side vents.

Air flows from the center, side and foot vents.

Air flows mainly from the foot vents.

Air flows from the front defroster and foot vents.
6 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS

Press the rear window defroster switch to turn the system on or off.

This function automatically turns off after approximately 15 minutes.
7 INTAKE AIR CONTROL BUTTON
AIR RECIRCULATION

Press the intake air control button to recirculate interior air inside t\
he vehicle. The
indicator light on the
side will illuminate. This system is used to avoid outside
odors and to help adjust the inside vehicle temperature more effectively\
.

The air recirculation mode cannot be activated when the climate control \
system is in the
front defroster mode
or front defroster and foot vent mode .
OUTSIDE AIR CIRCULATION

Press the intake air control button again to draw outside air into the p\
assenger
compartment. The indicator light on the
side will illuminate.
AUTOMATIC INTAKE AIR CONTROL

In the automatic mode, the intake air will be controlled automatically. \
To manually
control the intake air, press the intake air control button. To return t\
o the automatic
control mode, press the intake air control button for about 2 seconds.
8 A/C BUTTON

Press the A/C button to turn the air conditioner system on or off. This system helps \
cool
and dehumidify the air inside the cabin and defog the windows.
9 OFF BUTTON

Press the OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
2128163_16b_QX50_US_pQRG_091515.indd 139/15/15 2:55 PM