width INFINITI QX50 2016 Quick Reference Guide

3


The colored guide lines on the display screen indicate vehicle width and\
approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft
(2 m) and 10 ft (3 m).

There are some areas where the system will not
show objects.
• When in the front or the rear view display, an
object below the bumper or on the ground may not
be viewed
2.
• When in the bird’s-eye view, a tall object near the
seam of the camera viewing areas
3 will not
appear in the monitor.

The distance between objects viewed on the AVM
differs from the actual distance.

Objects in the bird’s-eye view will appear further
than the actual distance.
MOVING OBJECT DETECTION

If the MOD system detects moving objects
surrounding the vehicle, a yellow frame
4 will
be displayed on the camera image and a chime
will sound.

In the bird’s-eye view, a yellow frame is displayed on
those camera images (front, rear, right, left) where
moving objects are detected.

When the following are displayed:
• Blue MOD icon
5 : the system is operative in this view.
• Gray MOD icon
6 : the system is not operative in this view.
• No MOD icon: the system is off.

To temporarily turn the system on or off, touch the MOD key 7 .
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
4
7
5
6
Snow Mode
When SNOW mode is activated, engine output
is controlled to avoid wheel spin when driving or
starting the vehicle on snowy roads or slippery areas.

To turn on SNOW mode, press the SNOW switch 1,
located on the center console, to the
ON position.

The indicator light 2 will illuminate when the
SNOW mode is on.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
2
3
1
2
2128163_16b_QX50_US_pQRG_091515.indd 39/15/15 2:54 PM