Ins INFINITI QX56 2004 Factory Service Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2004, Model line: QX56, Model: INFINITI QX56 2004Pages: 3371, PDF Size: 78.5 MB
Page 392 of 3371
ASSEMBLY
AT-321
D
E
F
G
H
I
J
K
L
MA
B
AT
Revision: August 20072004 QX56
48. Install band servo anchor end pin and lock nut in transmission
case.
CAUTION:
Do not reuse band servo anchor end pin.
49. Install brake band in transmission case.
CAUTION:
Assemble it so that identification to avoid incorrect installa-
tion faces servo side.
50. Install front sun gear assembly to front carrier assembly.
CAUTION:
Apply ATF to front sun gear radial bearing and 3rd one-way
clutch end bearing.
51. Install needle bearing in front sun gear assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
52. Adjust brake band tilting using clips so that brake band contacts
front sun gear drum evenly.
SCIA5016E
SCIA2809E
SCIA5014E
SCIA2808E
SCIA5033E
Page 395 of 3371
AT-324
ASSEMBLY
Revision: August 20072004 QX56
d. Calculate dimension “M”.
3. Adjust total end play “T
1 ”.
Select proper thickness of bearing race so that total end play
is within specifications.
Assembly (2)UCS002JS
1. Install O-ring to oil pump assembly.
CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring.
2. Install bearing race to oil pump assembly.
CAUTION:
Apply petroleum jelly to bearing race.“M”: Distance between transmission case fitting sur-
face of oil pump and needle bearing on oil pump.
M = M
1 – M2
SCIA3125E
T1 = J – M
Total end play “T
1 ”:
0.25 - 0.55 mm (0.0098 - 0.0217 in)
Bearing races:
Refer to AT- 3 3 3 , "
BEARING RACE FOR ADJUST-
ING TOTAL END PLAY" .SCIA2810E
SCIA5172E
SCIA5252E
Page 396 of 3371
ASSEMBLY
AT-325
D
E
F
G
H
I
J
K
L
MA
B
AT
Revision: August 20072004 QX56
3. Install oil pump assembly in transmission case.
CAUTION:
Apply ATF to oil pump radial bearing.
4. Apply recommended sealant (Genuine RTV Silicone Sealant or
equivalent. Refer to GI-45, "
Recommended Chemical Products
and Sealants" .) to oil pump assembly as shown in illustration.
CAUTION:
Complete remove all moisture, oil and old sealant, etc.
From the oil pump mounting bolts and oil pump mounting
bolt mounting surfaces.
5. Tighten oil pump mounting bolts to specified torque. Refer to AT-
261, "Components" .
CAUTION:
Apply ATF to oil pump bushing.
6. Install O-ring to input clutch assembly.
CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring.
7. Install converter housing to transmission case.
CAUTION:
Do not reuse self-sealing bolt.
SCIA2 811 E
SCIA5321E
SCIA2300E
SCIA5 011 E
Converter housing mounting bolt:
: 52 N·m (5.3 kg-m, 38 ft-lb)
Self-sealing bolt:
: 61 N·m (6.2 kg-m, 45 ft-lb)
SCIA5171E
Page 397 of 3371
AT-326
ASSEMBLY
Revision: August 20072004 QX56
8. Make sure that brake band does not close turbine revolution
sensor hole.
9. Install control valve with TCM.
a. Install A/T fluid temperature sensor 2 to bracket.
b. Install A/T fluid temperature sensor 2 (with bracket) in control
valve with TCM. Tighten A/T fluid temperature sensor 2 mount-
ing bolt to the specified torque. Refer to AT-261, "
Components"
.
CAUTION:
Adjust bolt hole of bracket to bolt hole of control valve with
TCM.
c. Install O-ring to A/T assembly harness connector.
CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring.
d. Install control valve with TCM in transmission case.
CAUTION:
Make sure that turbine revolution sensor securely installs
turbine revolution sensor hole.
Adjust A/T assembly harness connector of control valve
with TCM to terminal hole of transmission case.
Hang down revolution sensor harness toward outside so
as not to disturb installation of control valve with TCM.
SCIA5034E
SCIA5264E
SCIA5301E
SCIA5155E
SCIA5034E
Page 398 of 3371
ASSEMBLY
AT-327
D
E
F
G
H
I
J
K
L
MA
B
AT
Revision: August 20072004 QX56
Assemble it so that manual valve cutout is engaged with
manual plate projection.
e. Install bolts A, B and C to control valve with TCM.
f. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. After
that tighten them in order (1 → 2 → 3), and then tighten other
bolts.
g. Tighten control valve with TCM mounting bolts to the specified
torque. Refer to AT-261, "
Components" .
10. Connect A/T fluid temperature sensor 2 connector.
11. Securely fasten A/T fluid temperature sensor 2 harness with ter-
minal clip.
SCIA5035E
Bolt symbol Length: mm (in) Number of bolts
A 42 (1.65) 5
B 55 (2.17) 6
C 40 (1.57) 1
SCIA5025E
SCIA5037E
SCIA5023E
SCIA5146E
Page 399 of 3371
AT-328
ASSEMBLY
Revision: August 20072004 QX56
12. Connect revolution sensor connector.
13. Securely fasten revolution sensor harness with terminal clips.
14. Pull down A/T assembly harness connector.
CAUTION:
Be careful not to damage connector.
15. Install snap ring to A/T assembly harness connector.
16. Install magnets in oil pan.
SCIA5024E
SCIA5293E
SCIA5299E
SCIA5300E
SCIA5200E
Page 400 of 3371
ASSEMBLY
AT-329
D
E
F
G
H
I
J
K
L
MA
B
AT
Revision: August 20072004 QX56
17. Install oil pan to transmission case.
a. Install oil pan gasket to oil pan.
CAUTION:
Do not reuse oil pan gasket.
Install it in the direction to align hole positions.
Complete remove all moisture, oil and old gasket, etc. From the oil pan gasket mounting sur-
faces.
b. Install oil pan (with oil pan gasket) to transmission case.
CAUTION:
Install it so that drain plug comes to the position as
shown in the figure.
Be careful not to pinch harnesses.
Complete remove all moisture, oil and old gasket, etc.
From the oil pan mounting surfaces.
c. Tighten oil pan mounting bolts to the specified torque in numeri-
cal order shown in the figure after temporarily tightening them.
Refer to AT- 2 6 1 , "
Components" .
CAUTION:
Do not reuse oil pan mounting bolts.
18. Install drain plug to oil pan. Tighten drain plug to the specified
torque. Refer to AT-261, "
Components" .
CAUTION:
Do not reuse drain plug gasket.
19. Install torque converter.
a. Pour ATF into torque converter.
Approximately 2 liter (2-1/8 US qt, 1-3/4 Imp qt) of fluid is
required for a new torque converter.
When reusing old torque converter, add the same amount
of fluid as was drained.
b. Install torque converter while aligning notches of torque con-
verter with notches of oil pump.
CAUTION:
Install torque converter while rotating it.
SCIA2308E
SCIA4 113 E
SAT4 2 8DA
SCIA5010E
Page 407 of 3371
ATC-2Revision: August 20072004 QX56 TROUBLE DIAGNOSIS ............................................ 33
CONSULT-II Function (BCM) .................................. 33
CONSULT-II BASIC OPERATION ....................... 33
DATA MONITOR .................................................. 34
How to Perform Trouble Diagnosis for Quick and
Accurate Repair ...................................................... 35
WORK FLOW ...................................................... 35
SYMPTOM TABLE .............................................. 35
Component Parts and Harness Connector Location ... 37
ENGINE COMPARTMENT .................................. 37
FRONT PASSENGER COMPARTMENT ............ 38
REAR PASSENGER COMPARTMENT ............... 39
Schematic ............................................................... 40
Wiring Diagram — A/C,A — ................................... 41
Front Air Control Terminals and Reference Value ... 51
PIN CONNECTOR TERMINAL LAYOUT ............ 51
TERMINALS AND REFERENCE VALUE FOR
FRONT AIR CONTROL ....................................... 51
A/C System Self-diagnosis Function ...................... 53
DESCRIPTION .................................................... 53
Operational Check (Front) ...................................... 56
CHECKING MEMORY FUNCTION ..................... 56
CHECKING BLOWER ......................................... 56
CHECKING DISCHARGE AIR ............................ 57
CHECKING RECIRCULATION ............................ 57
CHECKING TEMPERATURE DECREASE ......... 57
CHECKING TEMPERATURE INCREASE .......... 58
CHECK A/C SWITCH .......................................... 58
CHECKING AUTO MODE ................................... 58
Operational Check (Rear) ....................................... 59
CHECKING BLOWER ......................................... 59
CHECKING TEMPERATURE DECREASE ......... 59
CHECKING TEMPERATURE INCREASE .......... 59
Power Supply and Ground Circuit for Front Air Con-
trol ........................................................................... 60
INSPECTION FLOW ........................................... 60
COMPONENT DESCRIPTION ............................ 61
DIAGNOSTIC PROCEDURE FOR A/C SYSTEM ... 61
Mode Door Motor Circuit ........................................ 63
INSPECTION FLOW ........................................... 63
SYSTEM DESCRIPTION .................................... 64
COMPONENT DESCRIPTION ............................ 65
DIAGNOSTIC PROCEDURE FOR MODE
DOOR MOTOR ................................................... 65
Air Mix Door Motor Circuit ...................................... 67
INSPECTION FLOW ........................................... 67
SYSTEM DESCRIPTION .................................... 68
COMPONENT DESCRIPTION ............................ 69
DIAGNOSTIC PROCEDURE FOR AIR MIX
DOOR MOTOR (DRIVER) ................................... 69
DIAGNOSTIC PROCEDURE FOR AIR MIX
DOOR MOTOR (PASSENGER) .......................... 71
DIAGNOSTIC PROCEDURE FOR AIR MIX
DOOR MOTOR (REAR) ...................................... 73
Intake Door Motor Circuit ........................................ 76
INSPECTION FLOW ........................................... 76
SYSTEM DESCRIPTION .................................... 77
COMPONENT DESCRIPTION ............................ 78
DIAGNOSTIC PROCEDURE FOR INTAKE DOOR MOTOR ....................................................78
Defroster Door Motor Circuit ...................................79
SYMPTOM: ..........................................................79
INSPECTION FLOW ............................................79
SYSTEM DESCRIPTION .....................................80
COMPONENT DESCRIPTION ............................80
DIAGNOSTIC PROCEDURE FOR
DEFROSTER DOOR MOTOR .............................81
Front Blower Motor Circuit ......................................83
INSPECTION FLOW ............................................83
SYSTEM DESCRIPTION .....................................84
COMPONENT DESCRIPTION ............................85
DIAGNOSTIC PROCEDURE FOR BLOWER
MOTOR ................................................................85
COMPONENT INSPECTION ...............................89
Rear Blower Motor Circuit .......................................90
INSPECTION FLOW ............................................90
SYSTEM DESCRIPTION .....................................91
DIAGNOSTIC PROCEDURE FOR REAR
BLOWER MOTOR ...............................................91
COMPONENT INSPECTION ...............................99
Rear Air Control Circuit ......................................... 101
INSPECTION FLOW .......................................... 101
SYSTEM DESCRIPTION ................................... 102
DIAGNOSTIC PROCEDURE FOR REAR AIR
CONTROL ......................................................... 102
Magnet Clutch Circuit ............................................ 104
INSPECTION FLOW .......................................... 104
SYSTEM DESCRIPTION ................................... 105
DIAGNOSTIC PROCEDURE FOR MAGNET
CLUTCH ............................................................ 105
Insufficient Cooling ................................................110
INSPECTION FLOW ..........................................110
PERFORMANCE TEST DIAGNOSES .............. 111
PERFORMANCE CHART ..................................113
TROUBLE DIAGNOSES FOR UNUSUAL PRES-
SURE .................................................................114
Insufficient Heating ...............................................117
INSPECTION FLOW ..........................................117
Noise .....................................................................118
INSPECTION FLOW ..........................................118
Self-diagnosis ....................................................... 120
INSPECTION FLOW .......................................... 120
Memory Function .................................................. 121
INSPECTION FLOW .......................................... 121
Water Valve Circuit ................................................ 121
COMPONENT DESCRIPTION .......................... 121
DIAGNOSTIC PROCEDURE FOR WATER
VALVE ................................................................ 122
COMPONENT INSPECTION ............................. 124
Ambient Sensor Circuit ......................................... 125
COMPONENT DESCRIPTION .......................... 125
AMBIENT TEMPERATURE INPUT PROCESS . 125
DIAGNOSTIC PROCEDURE FOR AMBIENT
SENSOR ............................................................ 125
COMPONENT INSPECTION ............................. 127
In-vehicle Sensor Circuit ....................................... 128
COMPONENT DESCRIPTION .......................... 128
DIAGNOSTIC PROCEDURE FOR IN-VEHICLE
Page 408 of 3371
ATC-3
C
D
E
F
G
H
I
K
L
MA
B
AT C
Revision: August 20072004 QX56 SENSOR ........................................................... 129
COMPONENT INSPECTION ............................ 131
Optical Sensor Circuit .......................................... 131
COMPONENT DESCRIPTION ......................... 131
OPTICAL INPUT PROCESS ............................ 131
DIAGNOSTIC PROCEDURE FOR OPTICAL
SENSOR ........................................................... 132
Intake Sensor Circuit ............................................ 133
COMPONENT DESCRIPTION ......................... 133
DIAGNOSTIC PROCEDURE FOR INTAKE SEN-
SOR .................................................................. 133
COMPONENT INSPECTION ............................ 134
CONTROL UNIT ..................................................... 135
Removal and Installation ...................................... 135
FRONT AIR CONTROL .................................... 135
REAR AIR CONTROL ....................................... 135
AMBIENT SENSOR ................................................ 136
Removal and Installation ...................................... 136
REMOVAL ......................................................... 136
INSTALLATION ................................................. 136
IN-VEHICLE SENSOR ............................................ 137
Removal and Installation ...................................... 137
REMOVAL ......................................................... 137
INSTALLATION ................................................. 137
OPTICAL SENSOR ................................................ 138
Removal and Installation ...................................... 138
INTAKE SENSOR ................................................... 139
Removal and Installation ...................................... 139
REMOVAL ......................................................... 139
INSTALLATION ................................................. 139
BLOWER MOTOR .................................................. 140
Components ......................................................... 140
Removal and Installation ...................................... 140
FRONT BLOWER MOTOR ............................... 140
REAR BLOWER MOTOR ................................. 141
IN-CABIN MICROFILTER ....................................... 142
Removal and Installation ...................................... 142
FUNCTION ........................................................ 142
REPLACEMENT TIMING .................................. 142
REPLACEMENT PROCEDURE ....................... 142
HEATER & COOLING UNIT ASSEMBLY .............. 144
Components ......................................................... 144
Removal and Installation ...................................... 145
FRONT HEATER AND COOLING UNIT ASSEM-
BLY .................................................................... 145
REAR HEATER AND COOLING UNIT ASSEM-
BLY .................................................................... 146
HEATER CORE ...................................................... 147
Components ......................................................... 147
Removal and Installation ...................................... 148
FRONT HEATER CORE ................................... 148
REAR HEATER CORE ..................................... 149
DEFROSTER DOOR MOTOR ................................ 150
Removal and Installation ...................................... 150
REMOVAL ......................................................... 150
INSTALLATION ................................................. 150INTAKE DOOR MOTOR .........................................151
Removal and Installation ......................................151
REMOVAL .........................................................151
INSTALLATION .................................................151
MODE DOOR MOTOR ............................................152
Removal and Installation ......................................152
REMOVAL .........................................................152
INSTALLATION .................................................152
AIR MIX DOOR MOTOR .........................................153
Components .........................................................153
Removal and Installation ......................................153
FRONT AIR MIX DOOR MOTOR (DRIVER) .....153
FRONT AIR MIX DOOR MOTOR (PASSENGER) .154
REAR AIR MIX DOOR MOTOR ........................154
VARIABLE BLOWER CONTROL ...........................155
Removal and Installation ......................................155
REMOVAL .........................................................155
INSTALLATION .................................................155
REAR BLOWER MOTOR RESISTOR ....................156
Removal and Installation ......................................156
REMOVAL .........................................................156
INSTALLATION .................................................156
DUCTS AND GRILLES ...........................................157
Components .........................................................157
Removal and Installation ......................................160
CENTER CONSOLE HEAT DUCT AND REAR
FINISHER ASSEMBLY GRILLE ........................160
DEFROSTER NOZZLE .....................................160
RH AND LH SIDE DEMISTER DUCT ...............160
RH AND LH VENTILATOR DUCT .....................160
CENTER VENTILATOR DUCT .........................160
FLOOR DUCT ...................................................160
REAR OVERHEAD DUCTS ..............................160
REAR FLOOR DUCT ........................................161
GRILLES ...........................................................161
REFRIGERANT LINES ...........................................162
HFC-134a (R-134a) Service Procedure ...............162
SETTING OF SERVICE TOOLS AND EQUIP-
MENT ................................................................162
Components .........................................................164
Removal and Installation for Compressor ............166
REMOVAL .........................................................166
INSTALLATION .................................................167
Removal and Installation for Compressor Clutch . 167
REMOVAL .........................................................167
INSPECTION ....................................................168
INSTALLATION .................................................168
BREAK-IN OPERATION ....................................170
Removal and Installation for Low-pressure Flexible
Hose .....................................................................170
REMOVAL .........................................................170
INSTALLATION .................................................170
Removal and Installation for High-pressure Flexible
Hose .....................................................................170
REMOVAL .........................................................170
INSTALLATION .................................................170
Removal and Installation for High-pressure Pipe . 170
REMOVAL .........................................................170
INSTALLATION .................................................171
Page 409 of 3371
ATC-4Revision: August 20072004 QX56 Removal and Installation for Low-pressure Pipe ..171
REMOVAL .........................................................171
INSTALLATION ..................................................171
Removal and Installation for Rear High- and Low-
pressure A/C and Heater Core Pipes ...................171
REMOVAL .........................................................171
INSTALLATION ..................................................172
Removal and Installation for Underfloor Rear High-
and Low-pressure A/C and Heater Core Pipes ....172
REMOVAL .........................................................172
INSTALLATION ..................................................173
Removal and Installation for Refrigerant Pressure
Sensor ..................................................................173
REMOVAL .........................................................173
INSTALLATION ..................................................173
Removal and Installation for Condenser ...............173
REMOVAL .........................................................173
INSTALLATION ..................................................174
Removal and Installation for Front Evaporator .....175
REMOVAL .........................................................175
INSTALLATION ..................................................176
Removal and Installation for Rear Evaporator ......176
REMOVAL .........................................................177INSTALLATION .................................................. 177
Removal and Installation for Front Expansion Valve . 177
REMOVAL .......................................................... 177
INSTALLATION .................................................. 177
Removal and Installation for Rear Expansion Valve . 177
REMOVAL .......................................................... 177
INSTALLATION .................................................. 178
Checking for Refrigerant Leaks ............................ 178
Checking System for Leaks Using the Fluorescent
Dye Leak Detector ................................................ 178
Dye Injection ......................................................... 178
Electronic Refrigerant Leak Detector .................... 179
PRECAUTIONS FOR HANDLING LEAK
DETECTOR ....................................................... 179
CHECKING PROCEDURE ................................ 180
SERVICE DATA AND SPECIFICATIONS (SDS) .... 182
Service Data and Specifications (SDS) ................ 182
COMPRESSOR ................................................. 182
LUBRICANT ....................................................... 182
REFRIGERANT ................................................. 182
ENGINE IDLING SPEED ................................... 182
BELT TENSION ................................................. 182