Folding mirror INFINITI QX56 2011 Factory Service Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX56, Model: INFINITI QX56 2011Pages: 5598, PDF Size: 94.53 MB
Page 17 of 5598

ADP-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
ABS actuator and electric unit (control unit)Transmit the vehicle speed signal to driver seat control unit via
CAN communication.
A/T sift selector (Detention switch) Detention switch is installed on A/T shift selector. It is turned
OFF when A/T shift selector is in P position.
Driver seat control unit judges that A/T shift selector is in P posi- tion if continuity does not exist in this circuit.
Door mirror remote con-
trol switch Mirror switch
Mirror switch is integrated in
door mirror remote control switch.
It operates angle of door mirror face.
It transmits mirror face adjust operation to automatic drive posi- tioner control unit.
Changeover switch Changeover switch is integrated
in door mirror remote control
switch.
Changeover switch has three positions (L, N and R).
It changes operating door mirror motor by transmitting control signal to automatic drive positioner control unit.
Open/close switch Open/close switch is integrated in door mirror remote control
switch.
Power is supplied to folding mi rror from door mirror remote con-
trol switch when operating switch.
Tilt & telescopic switch Tilt switch
Tilt switch is equipped to steering column.
The operation signal is input to automatic drive positioner control
unit when tilt switch is operated.
Telescopic switch Telescopic switch is equipped to steering column.
The operation signal is input to automatic drive positioner control
unit when telescopic switch is operated.
Seat memory switch Set switch
It is used for registration and setting change of driving position and
Intelligent Key interlock function.
Seat memory switch The maximum 2 driving positions can be registered by memory
switch 1 to 2.
Driving position is set to the registered driving position when memory switch is pressed while operation conditions are satis-
fied.
Seat memory indicator Memory indicator indicates the status of auto driving position sys-
tem by turning ON or blinking.
Power seat switch Sliding switch
Sliding switch is equipped to power seat switch on seat cushion
side surface.
The operation signal is input to driver seat control unit when slid- ing switch is operated.
Reclining switch The operation signal is input to driver seat control unit when re-
clining switch is operated.
The operation signal is input to driver seat control unit when re-
clining switch is operated.
Lifting switch (front) Lifting switch (front) is equipped to power seat switch on seat
cushion side surface.
The operation signal is input to driver seat control unit when lift-
ing switch (front) is operated.
Lifting switch (rear) Lifting switch (rear) is equipped to power seat switch on seat
cushion side surface.
The operation signal is input to driver seat control unit when lift-
ing switch (rear) is operated.
Component parts Description
Revision: 2010 May2011 QX56
Page 3711 of 5598

MIR-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
DOOR MIRROR
DOOR MIRROR : Component Parts LocationINFOID:0000000006257219
DOOR MIRROR : Component DescriptionINFOID:0000000006257220
1. TCMRefer to TM-10, "
A/T CONTROL
SYSTEM : Componen t Parts Loca-
tion"
2. Door mirror (passenger side) 3. BCM
Refer to BCS-4, "
BODY CONTROL
SYSTEM : Component Parts Loca-
tion"
4. Automatic drive positioner control
unit
Refer to ADP-6, "
Component Parts
Location"
5. Door mirror remote control switch 6. Driver seat control unit
Refer to ADP-6, "
Component Parts
Location"
7. Door mirror (driver side)
JMLIA0871ZZ
Component parts Description
Automatic drive positioner control unit Door mirror is supplied with power after receiving the input of mirror
switch and changeover switch.
Door mirror re mote control
switch Mirror switch
It transmits mirror face adjust operation to automatic drive positioner
control unit.
Changeover switch It transmits the LH/RH control of door mirror that supplies power to au-
tomatic drive positioner control unit.
Open/close switch Power is supplied to folding mirro
r from door mirror remote control
switch when operating switch.
Door mirror It makes mirror face operate from side to side and up and down via in-
tegrated motor.
Revision: 2010 May2011 QX56