9
Wiper and Washer Switch2nd Row Seats
Move the lever up or down to one of the following positions to
operate the windshield wipers:
MIST
One sw
eep operation
OFF
Wipers ar
e off
AUTO
Speed-sensing and r
ain-sensing (if so equipped) automatic wipe
LO
C
ontinuous wipe, slow
HI
C
ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist the control
ring
. The rain-sensing function (if so equipped) can be disabled in
the vehicle information display under “Vehicle Settings”. Pull the lever
toward you operate the windshield washer.
REAR WIPER AND WASHER
Turn the rear wiper switch
to one of the following positions to
operate the rear wiper:
OFF
Wiper
is OFF
INT
In
termittent wiping
ON
C
ontinuous wipe, slow
Push the lever
forward to operate the rear windshield washer.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Forward and backward adjustment:
Pull the center of the bar
up and hold it while you slide the seat
forward or backward to the desired position until it latches.
Seat angle adjustment:
Pull up on the lever
and lean back until the seat latches. To bring
the seatback forward, pull the lever up and lean your body forward
until it latches.
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
On the passenger’s side of the vehicle, the 3
rd row can be accessed
without removing a child seat installed in the 2nd row.
•
Lift up on the seatback
release lever
and slide the entire
seat forward.
•
T
o return the seat to a locked position, push the upper seatback
rearward until the seatback and track are locked.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
3499324_19b_QX60_US_QRG_062118.indd 96/21/18 9:47 AM
