display INFINITI QX60 2023 Owners Manual

• Tap the brake pedal; theindicator
(green) goes out.
• Push the cruise control ON/OFF switch off. The
indicator in the vehicle infor-
mation display go out.
The cruise control is automatically canceled
and the
indicator (green) in the vehicle
information display goes out if:
• You depress the brake pedal while pushing the RES+ or SET- switch. The preset speed
is deleted from memory.
• The vehicle slows down more than 8 mph (13 km/h) below the set speed.
• You move the shift lever to N (Neutral).
To reset at a faster cruising speed, use one of
the following three methods:
• Depress the accelerator pedal. When the vehicle attains the desired speed, push and
release the SET- switch.
• Push and hold the RES+ switch. When the vehicle attains the speed you desire, release
the switch.
• Push and release the RES+ switch. Each time you do this, the set speed increases by
about 1 mph (1.6 km/h). To reset at a slower cruising speed,
use one
of the following three methods:
• Lightly tap the brake pedal. When the ve- hicle attains the desired speed, push the
SET- switch and release it.
• Push and hold the SET- switch. Release the switch when the vehicle slows to the de-
sired speed.
• Push and release the SET- switch. Each time you do this, the set speed decreases by
about 1 mph (1.6 km/h).
To resume the preset speed, push and re-
lease the RES+ switch. The vehicle returns to
the last set cruising speed when the vehicle
speed is over 25 mph (40 km/h).
WARNING
Failure to follow the warnings and instruc-
tions for proper use of the ProPILOT Assist
system could result in serious injury or
death.
• ProPILOT Assist is not a self-driving
system. Within the limits of its capabili-
ties, as described in this manual, it helps
the driver with certain driving activities.
• The ProPILOT Assist system is not a re-
placement for proper driving procedures
and is not designed to correct careless,
inattentive or absent-minded driving.
ProPILOT Assist will not always steer
the vehicle to keep it in the lane. The Pro-
PILOT Assist system is not designed to
prevent loss of control. It is the driver’s
responsibility to stay alert, drive safely,
keep the vehicle in the traveling lane, and
be in control of the vehicle at all times.
• There are limitations to the ProPILOT
Assist system capability. The ProPILOT
Assist system does not function in all
driving, traffic, weather, and road condi-
tions. It is the driver’s responsibility to
stay alert, drive safely, keep the vehicle
in the traveling lane, and be in control of
the vehicle at all times.
PROPILOT ASSIST (if so equipped)
5-84Starting and driving

PROPILOT ASSIST SYSTEM
OPERATION1Steering-wheel-mounted control (left)
2Vehicle information display
3Steering-wheel-mounted control (right)
4ProPILOT Assist switch
The ProPILOT Assist system has the follow-
ing two functions:
1. Intelligent Cruise Control (ICC)
The ICC system can be set to one of two
cruise control modes:
• Conventional (fixed speed) cruise control
mode: For cruising at a preset speed
NOTE:Steering Assist is not available in the con-
ventional (fixed speed) cruise control mode.
•Vehicle-to-vehicle distance control mode:
The ICC system maintains a selected dis-
tance from the vehicle in front of you within
the speed range of 0 to 90 mph (0 to 144
km/h) up to the set speed. The set speed
can be selected by the driver between 20 to
90 mph (32 to 144 km/h). When the ve-
hicle ahead slows to a stop, your vehicle
gradually decelerates to a standstill. When
the vehicle is stopped, the ICC system
maintains braking force to keep your ve-
hicle stopped.
NOTE:When your vehicle is stopped for less than 3
seconds and the vehicle ahead begins to
move, your vehicle will start moving again
automatically.
LSD4204
5-86Starting and driving

–When your vehicle is at a standstill
for more than 3 seconds and the ve-
hicle ahead begins to accelerate,
push the RES+ switch or lightly de-
press the accelerator pedal. The ICC
system starts to follow the vehicle
ahead.
– When no vehicle is detected ahead
within the driver selected distance,
the vehicle travels at the speed set
by the driver. The speed must be
above 20 mph (32 km/h) to use this
function.
• For vehicles equipped with ProPILOT As- sist with Navi-link and only when on a lim-
ited access freeway (as identified in the
navigation map data):– The time the vehicle can remain stopped and automatically restart is extended
from 3 seconds to 30 seconds.
– If a vehicle ahead cuts in or out of the lane ahead, the vehicle may not auto-
matically start when the traffic ahead
begins to move. You need to push up the
RES+ switch or lightly depress the accel-
erator pedal to follow the vehicle directly
ahead when it is safe to do so.NOTE:Even if the Forward Emergency Braking
(FEB) with Pedestrian Detection setting is
turned off by the driver using the “Settings”
menu in the vehicle information display, FEB
with Pedestrian Detection will be automati-
cally turned on when ICC is used.
2. Steering Assist
The Steering Assist function controls the
steering system to help keep your vehicle
within the traveling lane.
When there is no vehicle ahead, Steering
Assist is not available at speeds under 37
mph (60 km/h).
ProPILOT Assist switches
LSD4173
Starting and driving5-87

1RES+ switch:
Resumes set speed or increases speed
incrementally
2ProPILOT Assist switch:
Turns the ProPILOT Assist system on or off
3DISTANCE switch:
– Long
– Middle
– Short
4SET- switch:
Sets desired cruise speed or reduces speed
incrementally
5CANCEL switch:
Deactivates the ProPILOT Assist system
6Steering Assist switch:
Turns the Steering Assist function on or off
NOTE:
For ProPILOT Assist with Navi-link
equipped vehicles: When Manual mode is se-
lected in the “Spd. Limit Assist” menu, oper-
ating the RES+ or SET- switch can apply the
indicated speed limit to the vehicle set speed.
For additional information, see “Speed Limit
Assist — a feature of ProPILOT Assist with
Navi-link” (P. 5-102).
The ProPILOT Assist system
display and indicators
1. ProPILOT Assist activation
Displays once the ProPILOT Assist sys-
tem is activated
2. Vehicle ahead detection indicator
Indicates whether the system detects a
vehicle in front of you
3. Steering Assist indicator
Indicates the status of the Steering Assist
function by the color of the indicator
LSD4423LSD4317
5-88Starting and driving

• Steering Assist indicator (gray): SteeringAssist standby
• Steering Assist indicator (green): Steer- ing Assist active
4. Set distance indicator
Displays the selected distance
5. Lane marker indicator
Indicates whether the system detects lane
markers
• No lane markers displayed: Steering Assist is turned off
• Lane marker indicator (gray): No lane markers detected
•
Lane marker indicator (green): Lane mark-
ers detected, Steering Assist is active
• Lane marker indicator (yellow): Lane de- parture is detected 6.
ProPILOT Assist status indicator
Indicates the status of the ProPILOT As-
sist system by the color of the indicator
– ProPILOT Assist status indicator (white): ProPILOT Assist is on but in
standby.
– ProPILOT Assist status indicator (blue): ProPILOT Assist active
7. Steering Assist status indicator/warning
Displays the status of the Steering Assist
by the color of the indicator/warning
• No Steering Assist status indicator dis- played: Steering Assist is turned off
• Steering Assist indicator (gray): Steering Assist standby
• Steering Assist indicator (green): Steer- ing Assist active
• Steering Assist indicator (yellow): Steer- ing Assist malfunction 8.
Speed control status indicator/set dis-
tance indicator/lane marker indicator
(
)
Displays the status of speed control by
the color of the indicator, and displays the
selected distance by the number of hori-
zontal bars shown
• Speed control status indicator (white): ICC standby
• Speed control status indicator (green): ICC (distance control mode) is active
– Green vehicle icon displayed: Vehicle detected ahead
– No vehicle icon shown: No vehicle de- tected ahead (Your vehicle maintains the
driver-selected set speed.)
• Speed control status indicator (orange): Indicates an ICC malfunction
For the lane marker indicator, see “Steering
Assist display and indicators” (P. 5-112).
9. Set vehicle speed indicator
Indicates the set vehicle speed
Starting and driving5-89

10.Vehicle set speed indicator (if so
equipped) ()
Indicates the vehicle set speed
11. Road information indicator (if so
equipped) (
,)
Indicates the detected road information.
For additional information, see “Speed
Adjust by Route - a feature of ProPILOT
Assist with Navi-link” (P. 5-104).
12. Detected speed limit indicator (if so
equipped) (
)
Indicates the currently detected speed
limit.
For additional information, see “Speed
Limit Assist - a feature of ProPILOT As-
sist with Navi-link” (P. 5-102).
13. Speed Limit Assist indicator (if so
equipped) (A,
,)
Indicates the Speed Limit Assist activa-
tion mode or system operation.
For additional information, see “Speed
Limit Assist - a feature of ProPILOT As-
sist with Navi-link” (P. 5-102).
TURNING THE CONVENTIONAL
(fixed speed) CRUISE CONTROL
MODE ON
NOTE:
ProPILOT Assist provides no approach
warnings, automatic braking, or steering as-
sist in the conventional (fixed speed) cruise
control mode.
To choose the conventional (fixed speed)
cruise control mode, push and hold the Pro-
PILOT Assist switch for longer than approxi-
mately 1.5 seconds. For additional informa-
tion, see “Conventional (fixed speed) cruise
control mode” (P. 5-117).
OPERATING PROPILOT ASSIST
When the driving aids are enabled:
Zone Driving Aid Display
For-
ward Forward Emergency
Braking (FEB) with
Pedestrian Detection
Outline
Predictive Forward
Collision Warning
(PFCW)
LSD4318
Example (all enabled)
5-90Starting and driving

Zone Driving AidDisplay
Lane Lane Departure
Warning (LDW)
Outline
Lane Departure Pre-
vention (LDP) Shaded
Blind
Spot Blind Spot Warning
(BSW)
Outline
Blind Spot Intervention
(BSI) Shaded
1. Push the ProPILOT Assist switch
OA. This
turns on the ProPILOT Assist system.
• The ProPILOT Assist status indicator
OBilluminates in white.
2. A screen is displayed for a period of time that indicates the status of the driving aid
functions.
• When any of the “Warning” systems are enabled, the “
” is shown in each zone.
• When any of the “Intervention” systems are enabled, the “
” mark is shown in each
zone.
• When no system is enabled, “OFF” is shown in each zone. To change the status of the driving aids, use
the
O1orO2button to navigate
the settings screen. For additional informa-
tion, see “How to use the vehicle information
display” (P. 2-44).
LSD4210LSD4211
Starting and driving5-91

3. Accelerate or decelerate your vehicle tothe desired speed and push down the
SET- switch
OC.
4. The ProPILOT Assist system begins to automatically maintain the set speed. The
ProPILOT Assist activation indicator
ODand ProPILOT Assist status indicatorOEilluminate (blue). When a vehicle ahead is
traveling at a speed of 20 mph (32 km/h)
or below and the SET- switch is pushed,
the set speed of your vehicle is 20 mph
(32 km/h).
NOTE:
When the LDP and BSI systems are enabled
in the settings menu of the vehicle informa-
tion display, turning the ProPILOT Assist
system on will turn on the LDP and BSI sys-
tems at the same time. If the LDP system is
disabled in the settings menu, the LDP sys-
tem will automatically be turned on when
the Steering Assist system is active. For ad-
ditional information, see “Lane Departure
Prevention (LDP)” (P. 5-43) and “Blind Spot
Intervention (BSI)” (P. 5-61).
When the SET- switch is pushed under the
following conditions, the ProPILOT Assist
system cannot be set and the set vehicle
speed indicator
O1blinks for approximately 2
seconds:
• When traveling below 20 mph (32 km/h) and the vehicle ahead is not detected
• When the shift lever is not in the D (Drive) position or manual shift mode
• When the parking brake is applied
• When the brakes are operated by the driver
• When the VDC system is off. For additional information, see “Vehicle Dynamic Control
(VDC) system” (P. 5-168).
LSD4303LSD4214
5-92Starting and driving

WARNING
When the accelerator pedal is depressed
and you are approaching the vehicle ahead,
the ICC system will neither control the
brake nor warn the driver with the chime
and display. The driver must manually con-
trol the vehicle speed to maintain a safe
distance to the vehicle ahead. Failure to do
so could result in severe personal injury or
death.
NOTE:
When you accelerate by depressing the ac-
celerator pedal or decelerate by pushing the
SET- switch and the vehicle travels faster
than the speed set by the driver, the set
speed vehicle indicator will blink.
How to change the set distance to
the vehicle ahead
The distance to the vehicle ahead can be
selected at any time.
Each time the DISTANCE switch
OAis
pushed, the set distance will change to long,
middle, short and back to long again in that
sequence.
LSD4216
5-94Starting and driving

HOW TO ENABLE/DISABLE THE
STEERING ASSIST1Steering-wheel-mounted control (left)
2Vehicle information display
3Steering Assist switchUse the following methods to enable or dis-
able the Steering Assist.
Steering Assist switch:
To turn the Steering Assist on or off, push the
Steering Assist switch
O3on the instrument
panel.
NOTE:
• When the Steering Assist switch is used to turn the system on or off, the system re-
members the setting even if the ignition
switch is cycled. The switch must be
pushed again to change the setting to on
or off.
• The Steering Assist switch changes the status of the “Steering Assist” selection
made in the “Settings” screen in the vehicle
information display.
Setting in the vehicle information display:
1. Press the
button on the steering
wheel
O1until “Settings” displays in the
vehicle information display
O2.
2. Use the scroll dial
O1to select “Driver
Assistance.” Then press the OK button
O1.
3. Use the scroll dial
O1to select “Steering
Assist” and then press the OK button
O1
to turn the system on or off.
LSD4424
5-96Starting and driving