low beam INFINITI QX70 2014 Quick Reference Guide

8
first drive features
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent Key



is with you (that is, in your pocket or purse).
Depress the brake pedal.

• If the brake pedal is not depressed, pushing the




ignition switch once enters the
ACC mode.
• If
the ignition switch is pushed a second time, the




vehicle will enter the
ON mode.
Move the shift lever to
P (PARK).
Push the ignition switch to start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the
P (PARK) position and apply the parking brake.
Press the ignition switch
START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
Turn the headlight control switch to the position

01 to turn on the front parking, side marker, tail,

license plate and instrument panel lights. Turn the



switch to the position
02 to turn on the headlights.

AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it is




light. The system will keep the headlights on for a period of time after\
you turn the ignition off




and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he
AUTO position
03
t
hen push the ignition switch to ON. To deactivate the autolight system, turn the headlight



control switch to the

OFF,
01 or
position
02.
HIGH BEAM SELECT
Push the headlight control switch forward
04 to
select the high beam function. The blue indicator
light illuminates in the instrument panel. Pull



the headlight switch back to the original position to




select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
03
04
05
01
02
1354681_14a_Infiniti_QX70_QRG_052813.indd 85/28/13 12:00 PM

9
FOG LIGHT SWITCH

The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar)
to the
OFF position to



turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate

the windshield wipers:
01 Mist (MIST) - One sweep operation of the
front wipers.
02 Move the lever down to the (INT) position and
then rotate the control ring
03 away from you to

decrease the wiper delay.
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High ( h I) - Front wipers operate at a continuous
high-speed.
06 Front washer - Pull the lever toward you to

activate the front washer. The front wipers will
operate several times.

REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
09 Rear washer - Push the lever forward to

activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
INT
ON
MIST OFF
INT
LO
h

I01
02
04
05
03
06
09
07
08
1354681_14a_Infiniti_QX70_QRG_052813.indd 95/28/13 12:00 PM