seat memory INFINITI QX70 2014 Quick Reference Guide

7
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column



and outside mirrors can be stored in the automatic




drive positioner memory.
SEAT MEMORY CONTROLS (if so equipped)
Follow these procedures to set the memory positions:

• Confirm the shift lever is in the P (PARK) position.
• Push
the ignition switch to the ON position.
• Adjust
the driver’s seat, steering column and outside mirrors to the desired positions




using the adjusting switches for each feature.


• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The

indicator

light

on

the

memory

switch

you

select

will

illuminate

for

approximately

5

seconds.


• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch
01 right or left.

To adjust each mirror to the desired position, use the




control switch 02.
To fold the outside rearview mirrors, push the switch 03
to the CLOSE position and to unfold the outside rearview
mirrors push the switch
03 t
o the OPEN position.
RE
v
ERSE TILT-DOWN FEATURE (if so equipped)
When backing up the vehicle, the right or left outside mirror can be sel\
ected to turn downward
to provide better rear visibility.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01.



4.


The selected outside mirror surface moves downward.
The control switch 01 must be in the right or left position for the reverse tilt-down feature \

to function.
When one of the following conditions has occurred, the outside mirror su\
rface will return to



its original position:


• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center “neutral” p\
osition.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02
03
1354681_14a_Infiniti_QX70_QRG_052813.indd 75/28/13 12:00 PM