brake INFINITI QX70 2015 Quick Reference Guide
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2015, Model line: QX70, Model: INFINITI QX70 2015Pages: 28, PDF Size: 2.05 MB
Page 2 of 28

*See your Owner’s Manual for information.
1 INSTRUMENT BRIGHTNESS CONTROL*
2 TRIP COMPUTER SWITCHES
3 LOW TIRE PRESSURE WARNING LIGHT
4 PADDLE SHIFTERS*
5 HEADLIGHT AND TURN SIGNAL CONTROL
6 WINDSHIELD WIPER AND WASHER SWITCH
7 TRIP A/B RESET SWITCH*
8 STEERING WHEEL SWITCHES FOR 
  AUDIO* / BLUETOOTH® / NAVIGATION 
9 INTELLIGENT CRUISE CONTROL 
10 OUTSIDE MIRROR CONTROL SWITCH
11 INTELLIGENT BRAKE ASSIST (IBA)  
  OFF SWITCH*
12 POWER LIFTGATE SWITCH
1
44
65
7
22
23
20
14
2
3
21
13 POWER LIFTGATE MAIN SWITCH 
14 DYNAMIC DRIVER ASSISTANCE SWITCH*
15 TILT / TELESCOPIC STEERING 
  WHEEL SWITCH* 
16 WARNING SYSTEMS SWITCH*
17 VEHICLE DYNAMIC CONTROL (VDC)  
  OFF SWITCH* 
18 INTELLIGENT KEY PORT*
19 HOOD RELEASE*
20 CONTROL PANEL DISPLAY SCREEN*
21 AUDIO SYSTEM
22 AUTOMATIC CLIMATE CONTROLS
23 FRONT PASSENGER AIR BAG 
  STATUS LIGHT*
9Behind 
steering  wheel
Behind 
steering  wheel
On steering column Behind 
steering  wheel
15
8
19
10
1617
111213
18
1807402_15b_Infiniti_QX70_QRG_100114.indd   410/1/14   4:17 PM 
Page 5 of 28

3
2
3
    For information regarding how to access additional viewing cycles, pleas\
e see your  
Owner’s Manual.
 
   
The colored guide lines on the display screen indicate vehicle width and\
 approximate 
distances to objects with reference to the vehicle body line.
    •  Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft \
(3 m).
 
    There are some areas where the system will not  
show objects.
    •  When in the front or the rear view display, an  
object below the bumper or on the ground may  
not be viewed
 
2. 
    •  When in the bird’s-eye view, a tall object near the  
seam of the camera viewing areas
 
3 will not  
appear in the monitor.
 
    The distance between objects viewed on the AVM  
differs from the actual distance.
 
    Objects in the bird’s-eye view will appear further than  
the actual distance.
MOVING OBJECT DETECTION (MOD)
 
   
If the MOD system detects moving objects surrounding 
 
the vehicle, a yellow frame  1 will be displayed on 
 
the camera image and a chime will sound.
 
   
In the bird’s-eye view, a yellow frame is displayed on 
 
those camera images (front, rear, right, left) where  
moving objects are detected.
 
  When the following are displayed:
    •  Blue  MOD icon
 
2: the system is operative in this view.
    •  Gray  MOD icon
 
3: the system is not operative in this view.
    •  No  MOD icon: the system is off. The indicator will also be off if all of the w\
arning systems 
are deactivated using the camera settings menu.
 
  To temporarily turn the system on or off, touch the
 4 key.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your Owner’s Manual.
04
1
3
Garage Mode System
    
Your vehicle’s power liftgate operation can be set to stop opening at\
 a user-selected 
position in order to help avoid damaging the liftgate or overhead object\
s. 
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
2
4
Lane Departure Prevention (LDP) System  
(if so equipped)
    This system will help you return the vehicle to 
the center of the traveling lane by applying brake 
control to the left or right wheels individually (for a 
short period of time).
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1807402_15b_Infiniti_QX70_QRG_100114.indd   310/1/14   4:17 PM   
Page 11 of 28

9
Starting/Stopping the Engine 
  It is important to make sure the INFINITI Intelligent  
    Key is with you (that is, in your pocket or purse).
 
  Depress the brake pedal.
    •  If the brake pedal is not depressed, pushing the  
ignition switch once enters the ACC mode. 
    •  If the ignition switch is pushed a second time, the  
vehicle will enter the ON mode.
 
  Move the shift lever to the P (PARK) position. 
 
  Push the ignition switch to start the engine. 
TURNING THE ENGINE OFF 
 
  Move the shift lever to the P (PARK) position and apply the parking brake. 
 
  Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch 
   Turn the headlight control switch to the   position
 1 to turn on the front parking, side  
marker, tail, license plate and instrument panel 
lights. Turn the switch to the  
 position
 2 to  
turn on the headlights.
AUTOLIGHT SYSTEM
 
   The autolight system will automatically turn the headlights on when it i\
s dark and off when 
it is light. The system will keep the headlights on for a period of time\
 after you turn the igni -
tion off and all the doors are closed.
 
   To activate the autolight system, turn the headlight control switch to t\
he  AUTO position
 3 
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight 
control switch to the OFF,  
 position 1 or
  position
 2. 
HIGH BEAM SELECT
 
   Push the headlight control switch forward
 4 to  
select the high beam function. The blue indicator  
light 
 illuminates in the instrument panel. Pull  
the headlight switch back to the original position to  
select the low beam. The blue indicator light  
will extinguish.
 
   Pull and release the headlight control switch
 5 to  
flash the headlight high beams on and off.
4
5
1
2
3
1807402_15b_Infiniti_QX70_QRG_100114.indd   910/1/14   4:18 PM  
Page 16 of 28

14
USB/iPod® Interface
   
The USB jack
 1  is located in the center console  
under the arm rest.
 
   
When a compatible USB memory device or iPod®  
is plugged into the USB jack, compatible audio and  
video files stored on the device can be played  
through the vehicle’s audio system and front display.
For more information, refer to the “Monitor, climate, audio, phone  
and voice recognition systems (section 4)” of your Owner’s Manual.
first drive features
Conventional (Fixed Speed) Cruise Control 
    The cruise control system enables you to set a 
constant cruising speed once the vehicle has 
reached 25 MPH (40 km/h).
 
   The system will automatically maintain the set 
speed until you tap the brake pedal, accelerate, 
cancel or turn the system off. 
 
   To activate the cruise control, push the CRUISE  
ON/OFF switch
 
1. The CRUISE indicator light in  
the instrument panel will illuminate.
 
   To set a cruising speed, accelerate the vehicle to  
the desired speed, push the COAST/SET switch
 
2 
and release. The SET indicator light  in the instrument panel will illuminate. Take your foot 
off the accelerator pedal. Your vehicle will maintain the set speed.
 
   To reset at a faster cruising speed, push and hold the ACCEL/RES switch
 3. When the 
vehicle attains the desired speed, release the switch.
 
   To reset at a slower cruising speed, push and hold the COAST/SET switch
 2. Release the 
switch when the vehicle slows to the desired speed.
 
   To cancel the preset speed, tap the brake pedal or push the CANCEL switch
 4.
 
   To turn off cruise control, push the CRUISE ON/OFF switch
 1. Both the CRUISE indicator 
light and the SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
2
34
1
1807402_15b_Infiniti_QX70_QRG_100114.indd   1410/1/14   4:18 PM  
Page 17 of 28

15
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
 
  To set Vehicle-To-Vehicle Distance Control mode,   
press the CRUISE ON/OFF button  
1 for less  
than 1.5 seconds. The CRUISE indicator light  2  
will illuminate.
 
  Accelerate to the desired speed.
 
   Push down on the COAST/SET switch
 3 and  
release it. Cruise control will be set to the  
desired speed.
 
   Press the distance button
 4 repeatedly to change  
the set distance between long, middle and short.
 
   When a vehicle is not detected ahead of you in  
the lane, the set distance and set vehicle speed  
indicator lights will illuminate
 
5 in set mode. 
 
   When a vehicle is detected ahead of you in the lane,  
the vehicle ahead detection, set distance and set  
vehicle speed indicator lights will illuminate
 
6 in  
set mode. 
 
   To reset at a faster cruising speed, push and hold  
the ACCEL/RES switch
 
7. When the vehicle attains the desired  
speed, release the switch.
 
   To reset at a slower cruising speed, push and hold the COAST/SET  
switch
 
3. Release the switch when the vehicle slows to the desired speed.
 
    To cancel the preset speed, push the CANCEL switch
 8 or tap the brake pedal. The set 
vehicle speed indicator  5 will extinguish.
 
   To turn off cruise control, press the CRUISE ON/OFF button
 1. The CRUISE indicator  
light 
2 in the instrument panel will extinguish.
To set the conventional (fixed speed) cruise control mode:
 
   While cruise control is off, press the CRUISE ON/OFF
 button
 1 and hold it down for more 
than 1.5 seconds. The CRUISE indicator light will illuminate.
 
  Accelerate to the desired speed.
 
   Push down on the COAST/SET switch and release it. The SET indicator light will illuminate. 
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
 
   When one of the two cruise modes is in use, you must turn the system off\
 and then turn it 
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
87
3
4
1
25
6
1807402_15b_Infiniti_QX70_QRG_100114.indd   1510/1/14   4:18 PM  
Page 25 of 28

23
7   INFO button – Press to display the fuel economy, tire pressure, maintenan\
ce, location, 
traffic information (if so equipped) and weather information (if so e\
quipped).
8    button – Press to switch between the day screen (bright) and the ni\
ght screen (dark). 
 
Press and hold to turn off the display. Press again to turn on the displ\
ay.
9    ZOOM IN button – Press to zoom the map in.
10   MAP button – Press to display the map. While following a programed route\
, press multiple 
times to change the type of route information displayed.
11   SETTING button – Press to access the system settings.
12   BACK button – Press to return to the previous screen. In a settings scree\
n, this button 
is also used to apply the setting. In a character input screen, this but\
ton is also used to 
delete the characters that have been entered.
13   VOICE button – Press to hear the current guidance for a programed route.
For more information, please refer to your Navigation System Owner’s \
Manual.
DVD Player (if so equipped)
   
This system allows you to play video files via a DVD  
or USB storage device, containing supported file  
formats, from the front display.
 
   To view movies on the front display, stop the vehicle  
in a safe location, move the shift lever to the  
P (PARK) position and apply the parking brake.
 
   To reduce driver distraction, movies will not be  
shown on the front display while the vehicle is in  
any drive position.
For more information, refer to the “Monitor, climate, audio, phone and  
voice recognition systems (section 4)” of your Owner’s Manual.
1807402_15b_Infiniti_QX70_QRG_100114.indd   2310/1/14   4:19 PM