seat adjustment INFINITI QX70 2016 Warranty Information Booklet

LIMITATION OF WARRANTIES AND OTHER
WARRANTY TERMS AND STATE LAW RIGHTS
EXTRA EXPENSES - LIMITATIONS OF DAMAGES
THIS WARRANTY DOES NOT COVER INCIDENTAL OR
CONSEQUENTIAL DAMAGES SUCH AS LOSS OF THE
USE OF THE VEHICLE, INCONVENIENCE OR COM-
MERCIAL LOSS.
ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY.
Some states do not allow the exclusion or limitation
of incidental or consequential damages or limita-
tions on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights which vary from
statetostate.
Infiniti does not authorize any person to create for it
any other warranty, obligation or liability in connec-
tion with this vehicle.
THE WARRANTY BEGINS
The warranty period begins on the date the vehicle is
delivered to the first retail buyer or put into service,
whichever is earlier.
FOR HOW LONG AND WHAT IS COVERED
BASIC COVERAGE
●The basic coverage period is 48 months or
60,000 miles, whichever comes first.
●The warranty covers any repairs needed to correct
defects in materials or workmanship of all parts and
components of each new Infiniti vehicle supplied by
Infiniti subject to the exclusions listed under the
heading ”WHAT IS NOT COVERED” or, if the part is
covered by one of the separate coverages described
in the following sections of this warranty, that spe-
cific coverage applies instead of the basic coverage.
POWERTRAIN COVERAGE
●The Powertrain coverage period is 72 months or
70,000 miles, whichever comes first.
●This warranty covers any repairs needed to correct
defects in material or workmanship.
●Powertrain coverage includes components listed be-
low, under the headings Engine, Transmission and
Transaxle, Drivetrain, and Restraint System, supplied
by Infiniti, subject to the exclusions listed under the
heading “WHAT IS NOT COVERED.”
ENGINE - Cylinder heads and block and all internal
parts, rocker covers and oil pan, valve train and front
cover, timing chain and tensioner, oil pump, water
pump and fuel pump, fuel in jectors, intake and ex-
haust manifolds, flywheel, seals and gaskets.
TRANSMISSION AND TRANSAXLE - Case and all
internal parts, torque converter and converter
housing, automatic transm ission control module,
transfer case and all internal parts, seals and gas-
kets, clutch cover and housing, A/T cooler, and
electronic tr ansmission controls.
DRIVETRAIN - Drive shafts, final drive housing and
all internal parts, propeller shafts, universal joints,
bearings, seals and gaskets. RESTRAINT SYSTEM - Air bags and related elec-
tronic control systems.
CORROSION COVERAGE (PERFORATION FROM CORRO-
SION)
Any body sheet metal panel supplied by Infiniti found to
have developed perforation (rust-through) due to corro-
sion in normal use is covered for 84 months, regardless
of mileage, except for those items listed under “WHAT IS
NOT COVERED.” No additional rust proofing applica-
tions are required. Perforation is a condition in which
any body sheet metal panel has corroded from one
surface to another.
TOWING COVERAGE
If your vehicle is inoperative due to the failure of a
warranted part during any of the New Vehicle Limited
warranties, inc luding Emission and Seatbelt warranties,
towing service to the nearest authorized Infiniti retailer
is covered.
ADJUSTMENT COVERAGE
Service adjustments not usually associated with the
replacement of parts, such as wheel alignment, and
wheel balancing are covered only during the first
12 months or 12,000 miles, whichever comes first.●Limited 6 month warranty coverage:
OE wiper blade inserts are covered for the first six
months of ownership.
REFRIGERANT RECHARGE ONLY COVERAGE
Refrigerant recharge not associated with the repair or
replacement of a warranted part is covered only during
the first 12 months, regardless of the mileage.
(Continued on next page)
2016 NEW VEHICLE LIMITED WARRANTY 5

SAFETY WARNINGS
Property damage, serious injury or death may result
from:
TIRE FAILURE DUE TO UNDERINFLATION/
OVERLOADING / MISAPPLICATION.
Follow the vehicle Owner’s Manual or tire placard in
vehicle.
TIRE FAILURE DUE TO IMPACT DAMAGE /
IMPROPER MAINTENANCE.
Tires should be inspected regularly by a qualified
technician for signs of damage, such as punctures or
impacts.
TIRE FAILURE DUE TO IMPROPER REPAIRS.
See Rubber Manufacturer’s Association (RMA) es-
tablished repair procedures at www.rma.org and/or
go to www.goodyear.com for information on proper
repair procedures.
EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO
IMPROPER MOUNTING.
Only specially-trained persons should mount tires.
When mounting tires, use safety cage and clip-on
extension air hose to inflate.
FAILURE TO MOUNT RADIAL TIRES ON APPROVED
RIMS.
FAILURE TO DEFLATE SINGLE OR DUAL ASSEMBLIES
COMPLETELY BEFORE DEMOUNTING.
TIRE SPINNING.
On slippery surfaces such as snow, mud, ice, etc., do
not spin tires in excess of 35 mph (55 kph), as
indicated on the speedometer.
EXCESSIVE WHEEL SPINNING.
This can also result in tire disintegration or axle fail-
ure. WARNING: Vehicle handling, traction, ride comfort and
other performance parameters may be significantly af-
fected by a change in tire size or type. Before replacing
tires, always consult and follow the vehicle Owner’s
Manual because some vehicle
manufacturers prohibit
changing tire size. When selectin g tires that are different
from the original equipment size make certain: (1) The
tires have adequate load carrying capacity based on the
vehicle placard, (2) The tires have sufficient inflation
pressure to carry the load and (3) There is proper clear-
ance with no interference points between the tire and
vehicle. The consumer must be aware to always drive
safely and obey all traffic laws. Avoid sudden, sharp
turns or lane changes. Failure to follow any of these
warnings may result in loss of control of the vehicle,
leading to an accident and serious injury or death.
TIRE CARE AND MAINTENANCE GUIDE
The easiest way t o help ensure satisf actory mileage and
performance from your Goodyear or Dunlop tires is to
give them a simple but frequent (at least monthly) in-
spection for proper inflation, ev en treadwear, and the
presence of any damage.
DO MAINTAIN PROPE R INFLATIONPRESSURE
IN YOUR TIRES
Proper inflation pressure is necessary for optimum tire
performance, safety and fuel economy. Check inflation
pressures at least once a month and before long trips. Use
an accurate tire pressure gauge. Always check pressures
when the tires are cold (when the vehicle has been driven
less than one mile). If you must check inflation when the
tires are hot, add 4 psi (27 kPa) to the recommended cold inflation pressure. It is difficult to tell just by looking at
radial tires whether they are underinflated.*
Furthermore, when operating a vehicle equipped with
radial tires, it is difficult to notice when a tire has gone
flat or nearly flat since the “feel” of the vehicle does not
change significantly.
*Evidence of air loss or repeated underinflation always
requires expert inspection to determine the source of
leakage and tire r
emoval todetermine repairability. To
avoid injury, NEVER attempt to reinflate a tire that has
been run severely underinflated.
Progressive air loss may result f rom punctures, cuts, curb-
ing, impacts or partial bead unseating. Some fitment
causes for air loss are (1) incomplete bead seating, (2)
bead tearing caused by a machine tool due to insufficient
lubrication or improper adjustment, (3) leaking valve core
or rubber valve components should be replaced when
problems are detected and whenever tires are replaced.
Always maintain inflation pressure at the level recom-
mended by the vehicle manufacturer as shown on the
vehicle placard, vehicle certification label or in the ve-
hicle Owner’s Manual:
Underinflation is the leading cause of tire failure and may
result in severe cracking, component separation or “blow-
out.” It reduces tire load capacity, allows excessive side-
wall flexing and increases rolling resistance, resulting in
heat and mechanical damage. Maintaining proper infla-
tion pressure is the single most important thing you can do
to promote tire durabilityand maximize tread life.
Overinflation increases stiffness, which may deteriorate
ride and generate unwanted vibration. Overinflation
also increases the chances of impact damage.
(Continued on next page)
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
27