INFINITI QX80 2014 Quick Reference Guide

19
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch
01. The CRUISE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAST/SET
switch
02 and release. Take your foot off the accelerator pedal. Your vehicle wil\
l maintain
the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
04.
To turn off cruise control, push the ON/OFF switch 01. The CRUISE indicator light in the
instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
To rewind or fast forward a track on a CD, press and hold the SEEK·CAT button
or the TRACK
button.
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for



SiriusXM Satellite Radio.
To store a station in a preset you must first select a radio band by pre\
ssing the



FM•AM 05 or
XM
06 button, then tune to the desired FM, AM or SiriusXM Satellite

Radio station.
Then press and hold the desired station preset button (1-6) until the preset number is



updated on the display and the sound is briefly muted. The channel indic\
ator will then




display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored



then press the corresponding station select button
(1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with op\
tional SiriusXM Satellite Radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591592_14b_Infiniti_QX80_QRG_093013.indd 199/30/13 9:36 AM

20
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance from
the vehicle traveling in front of you according to that
vehicle’s speed (up to the set speed) or at the set
speed when the road ahead is clear.
This system may not function properly due to
road conditions when direct sunlight, rain, mud,
snow or other road spray cause the sensor to
become blocked.
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than 1.5
seconds. The indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release it. Cruise control
will be set to the desired speed.
Press the distance button 04 repeatedly to change the set distance
between long, middle, and short.
When a vehicle is not detected ahead of you in the lane, the set distanc\
e and set vehicle
speed indicator lights will illuminate
05 in set mode.
When a vehicle is detected ahead of you in the lane, t he vehicle ahead detection, set
distance, and set vehicle speed indicator lights will illuminate
06 in set mode.
TO SET CONVENTIONAL FIXED SPEED CRUISE CONTROL MODE:
While cruise control is off, press the CRUISE ON/OFF button and hold it down for more than
1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
TO SWITCH BETWEEN THE TWO CRUISE CONTROL MODES:
When one of the two cruise modes is in use, you must turn the system off\
, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
01
04
0205
06
1591592_14b_Infiniti_QX80_QRG_093013.indd 209/30/13 9:36 AM

21
Trip Computer
When the button 01 is pressed, the following
modes will appear on the vehicle information
display
02:
•

MPG – Displays the current and average fuel
consumption since the last reset.
•

MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
•

TIME/MILES – Displays the elapsed time and
distance driven since the last reset.
•

RANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
•

OUTSIDE TEMP – Displays the temperature outside your vehicle.
•

SETTING – Allows you to set reminders for alerts and maintenance intervals o\
r change
the language and units used in the system.



—


Press the button 03 to cycle through the various setting modes.



—


Press the button 01 to choose the selected mode.
•

WARNING – Displays when a warning is present.
Press the button 03 for approximately 1 second to reset the currently displayed trip
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the button to interrupt the voice prompts at
any time and speak a command after the tone.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
Say commands after the tone, or press the
button to say a command at any time.
When speaking Phonebook names, please be aware
some phones require the last name to be spoken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
01
03
02
system guide
1591592_14b_Infiniti_QX80_QRG_093013.indd 219/30/13 9:36 AM

22
system guide
To cancel a voice recognition session, simply wait 5 seconds, say “Ca\
ncel” or “Quit”, or
press and hold the
button for 5 seconds.
If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone Owner’s Manual
and visit www.InfinitiUSA.com/Bluetooth.
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.

Press the
button and select the “Connect Phone” key.
2. Initiate connecting from the phone.



•


The connecting procedure varies according to

each cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.



•


When prompted for a PIN code, enter “1234”

from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.


When the connecting is complete, the screen will
return to the Phone menu display.
PHONEBOOK SETUP
Depending on your cell phone, the system may
automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth
® system.
If the phonebook does not download automatically,
40 entries can be individually downloaded.
To manually download entries:



1.

Press the button and select the “Quick Dial” key.



2.


Select the “Add New” key at the top of the display.

There are different methods to input a phone number.
Select one of the following options:
“Copy from Call History” to save a number from the
Outgoing, Incoming or Missed Calls lists.
“Copy from the Phonebook” to save a number that has
been downloaded from your handset to the vehicle.
“Enter Number by Keypad” to input the number and name manually.
1591592_14b_Infiniti_QX80_QRG_093013.indd 229/30/13 9:36 AM

23
DIALING A CONTACT USING VOICE RECOGNITION
To make a call using voice recognition, follow

this procedure:
1.


Press the button on the steering wheel.

After the tone, say “PHONE”
2.


After the system confirms your command, wait for the

tone and say “Phonebook”.
3.


The system will prompt you to speak a name. After the tone, say a name f\
rom your

phonebook. Be aware that for some phones it will be necessary to say the\
name in the last
name, first name format.
4.


The system will give you a list of close matches. After the tone, select\
the correct match by

saying the number next to the correct match.
5.


The system will confirm your selection. After the tone, say “Dial”\
.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the button or touch the
“Hang up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
1591592_14b_Infiniti_QX80_QRG_093013.indd 239/30/13 9:36 AM

24
system guide
Navigation System
01 Destination (DEST) - Press to enter a destination
02 INFINITI controller
•


Slide or rotate to highlight an item on the screen and press
ENTER to select the
highlighted item.
•


On the map screen turn to adjust the map scale.
•


To scroll the map, slide the INFINITI controller in the direction you wa\
nt to scroll.
03 Information (INFO) - Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
04 SETTING - Press to access the system settings.
05 ROUTE - Press to access the guidance control functions such as guidance cance\
llation,
route priority, and waypoint settings on the route.
06 MAP - Press to display the map. While following a programmed route, press m\
ultiple times
to change the type of route information.
07 BACK - Press to return to the previous screen. In a settings screen, this bu\
tton can also
be used to apply the setting. In a character input screen, this button c\
an also delete the
characters that have been entered.
08 VOICE - Press to hear the current voice guidance for a programmed route.
09 STATUS - Press multiple times to display audio information, the air conditione\
r status,
fuel economy or navigation directions.
10 OFF - Press to switch between the day screen (bright) and the night scree\
n (dark).

Press and hold the button to turn the display off. Press again to turn t\
he display on.
For more information, please refer to your Navigation System Owner’s \
Manual.
01
06
0708
05
02
03
09
04
10
1591592_14b_Infiniti_QX80_QRG_093013.indd 249/30/13 9:36 AM

25
HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage

doors, property gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink and ob\
serve the
indicator light:



•

A solid continuous light indicates the programing is complete and the Ho\
meLink button
will activate your device.



•

A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:



•

At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programmed HomeLink button for 2 seconds and release.\
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1591592_14b_Infiniti_QX80_QRG_093013.indd 259/30/13 9:36 AM

This Quick Reference Guide is intended to provide an overview of some of\
the unique features
of your new vehicle. See your Owner’s Manual, which contains importan\
t safety warnings and
information about the operation and maintenance of your vehicle, for com\
plete details. Nissan
North America, Inc. reserves the right to make changes, at any time, wit\
hout prior notice, in prices,
colors, materials, equipment, specifications, and models and to disconti\
nue models or equipment.
Due to continuous product development and other pre- and post-production\
factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with opti\
onal equipment. See
the actual vehicle for complete accuracy. Specifications, options and ac\
cessories may differ in
Hawaii, U.S. territories and other countries. For additional information\
on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America,\
Inc.
Printing: October 2013 (07) / QR14E 0Z62U1 / Printed in USA
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/qx80
or snap this barcode with an appropriate
barcode reader.
1591592_14b_Infiniti_QX80_QRG_093013.indd 29/30/13 9:34 AM