air condition INFINITI QX80 2014 Service And Maintenance Guide

The following descriptions are pro-
vided to give you a better understand-
ing of the scheduled maintenance
items that should be regularly
checked or replaced. The mainte-
nance log indicates at which
mileage/time intervals each item re-
quires service.
In addition to scheduled mainte-
nance, your Infiniti requires that
some items be checked during nor-
mal day-to-day operation. You can
find these items listed under “Gen-
eral Maintenance” in Chapter 8 of
your Owner’s manual.
Items marked with“*”are recom-
mended by Infiniti for reliable vehicle
operation. You are not required to per-
form such maintenance in order to
maintain the emission warranty or
manufacturer recall liability. Other
maintenance items and intervals are
required. When applicable, additional informa-
tion can be found in the “Do-it-
yourself” section in Chapter 8 of your
Owner’s Manual.
NOTE:
Nissan North America
does not advocate the use
of non-OEM approved
aftermarket flushing
systems and strongly
advises against performing
these services on a Infinti
product. Many of the
aftermarket flushing
systems use non- OEM
approved chemicals or
solvents, the use of which
has not been validated by
Nissan North America.
For recommended fuel, lubricants,
fluids, grease, and refrigerant refer to
Chapter 9 in your Owner’s Manual.
Emission Control System
Maintenance:
Drive Belts*
Check engine drive belts for wear,
fraying or cracking and for proper ten-
sion. Replace any damaged drive
belts.
Engine Air Filter
Replace at specified intervals. When
driving for prolonged periods in dusty
conditions, check/replace the filter
more frequently.
Engine Coolant*
Replace engine coolant at the speci-
fied interval. The recommended ser-
vice interval of the factory-fill coolant
is 105,000 miles (168,000 km) or
7 years, whichever comes first. When
adding or replacing coolant, be sure
to use only Genuine Nissan Long Life
Antifreeze/Coolant (Blue) or equiva-
lent with the proper mixture. (Refer to
the owner’s manual to determine the
proper mixture for your area). Subse-
EXPLANATION OF SCHEDULED MAINTENANCE ITEMS
9

STANDARD MAINTENANCE
❑Replace engine oil and filter
❑Replace engine air filter❑Replace in-cabin microfilter❑Replace CVT Fluid (QX60 Hybrid Electronic Vehicle (HEV)4
❑Lubricate Propeller shaft grease (for QX80 4WD)1
❑Rotate tires (refer to page 11 for exceptions)❑Inspect the following:__Automatic transmission fluid2
__Brake lines & cables__Brake calipers, pads, rotors__Brake light & cruise control switches3
__CVT fluid__Differential oil__Drive shaft boots (4WD/AWD)__Manual transmission oil__Propeller shaft (4WD/AWD/RWD)__Transfer case oil (4WD/AWD)
Additional Maintenance Items for Severe Operating
Conditions
❑Replace brake fluid
❑Inspect the following:__Axle & suspension parts__Exhaust system__Front suspension ball joints__Steering gear and linkage__Steering linkage ball joints
❑For Optional Premium Maintenance Upgrade information please see page 39.
❑ For the ultimate in prev entative maintenance, ask your Service Ad visor for a complimentary Multi-Point Inspection everytime youvisit your participating Infiniti
retailer. See page 14 for more information on Multi-Point Inspections.
1 The propeller shaft should be re-greased after being immersed in water.
2 Except models with 7-speed automatic transmission. Equipment varies by model. Perform only thos e operations that apply to your vehicle.
3 Inspect the clearance between the brake pedal and the switches (Q50, Q60 Coupe and Q60 Convertible).
4MileageOnly
Equipment varies by model. Perform only those operations that apply to your vehicle.
30,000 MILES OR 36 MONTHS
20
MAINTENANCE SCHEDULE

STANDARD MAINTENANCE
❑Replace engine oil and filter
❑Replace engine air filter❑Replace CVT Fluid (QX60 Hybrid Electronic Vehicle (HEV)4
❑Replace in-cabin microfilter❑Lubricate Propeller shaft grease (for QX80 4WD)1
❑Rotate tires (refer to page 11 for exceptions)❑Inspect the following:__Automatic transmission fluid2
__Brake lines & cables__Brake calipers, pads, rotors__Brake light & cruise control switches3
__CVT fluid__Differential oil__Drive shaft boots (4WD/AWD)__Engine drive belts__Manual transmission oil__Propeller shaft (4WD/AWD/RWD)__Transfer case oil (4WD/AWD)
Additional Maintenance Items for Severe Operating
Conditions
❑Replace brake fluid
❑Inspect the following:__Axle & suspension parts__Exhaust system__Front suspension ball joints__Steering gear and linkage__Steering linkage ball joints
NOTE: Refer to Page 9 for Engine Coolant maintenance information.
❑For Optional Premium Maintenance Upgrade information please see page 39.
❑ For the ultimate in prev entative maintenance, ask your Service Ad visor for a complimentary Multi-Point Inspection everytime youvisit your participating Infiniti
retailer. See page 14 for more information on Multi-Point Inspections.
1 The propeller shaft should be re-greased after being immersed in water.
2 Except models with 7-speed automatic transmission. Equipment varies by model. Perform only thos e operations that apply to your vehicle.
3 Inspect the clearance between the brake pedal and the switches (Q50, Q60 Coupe and Q60 Convertible).
4MileageOnly
Equipment varies by model. Perform only those operations that apply to your vehicle.
90,000 MILES OR 108 MONTHS
32
MAINTENANCE SCHEDULE