ECO mode INFINITI QX80 2018 Quick Reference Guide

7
4
3
2
1
5
6
Cruise Control
SETTING A CRUISING SPEED
• Press the CR UISE ON/OFF switch 1 to turn on the system.
• With the vehicle at the desired speed, push down the switch 2 to COAST/SET to
enable cruise control.
• The cruising speed c an be adjusted to a higher or lower speed by toggling the
control switch
2 up or down.
CANCELING THE PRESET SPEED
•


Push the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehicle in front of
you and reduce the speed to match a slower vehicle ahead.
• To increase the distance to the vehicle ahead to be maintained by the ICC system, push the distance switch
4 until the display shows the desired set distance, which
is shown by the number of lines on the set distance indicator
5.
• When a vehicle is detected ahead, a car icon will illuminate on the vehicle ahead
detection indicator
6 and your vehicle will reduce the speed to match the
slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped):
• While cruise c ontrol is off, push and hold the CRUISE ON/OFF switch 1 for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
• Accelerate to the desired speed.
• Push the swit ch 2 down toward COAST/SET and release it. The SET indicator
light will illuminate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
CONVENTIONAL
CRUISE CONTROL
(if so equipped) INTELLIGENT CRUISE
CONTROL (ICC)
(if so equipped)

1
3
2
3059068_18a_QX80_US_pQRG_101717.indd 710/17/17 1:15 PM