display JAGUAR XF 2011 1.G Quick Start Guide

6
J A G U A R X FJ A G U A R X F J A G U A R X F
Starting and driving
Low tire pressure
Airbag fault
DSC off, Trac DSC ON or
DSC fault. Flashing \b DSC
operating
Adaptive Cruise Control
activeSeat belt reminder
ASL active
Forward alert active
Engine malfunction
ABS fault (USA only)
EPB on, brake fluid low or
braking system fault.
(USA only)
EPB on, brake fluid low or
braking system fault
ABS fault
Applying • With the vehicle stationary, lift up the parking brake lever and then release it. The red warning
indicator in the instrument panel will illuminate.Releasing
• With the ignition on, apply the foot brake and press down on the parking brake lever.
• If the vehicle is stationary with the parking brake applied and either Drive orReverse selected,
pressing the accelerator will automatically release
the parking brake.
NOTE: Do \fOT use the recess in the electric parking
brake as a storage area.
Electric parking brakeSee page 3, item 17
Warning lampsDisplayed on the instrument panel
Operating note
The brake must be manually applied when parking.
Auto headlamps and wipersSee page 3, items 1and 7
MAX
MINMAX
MIN
6
5
7
Automatic wipers are activated by a rain sensor.
When the wiper control is moved up to the first
position the wipers will operate automatically as
required. Sensitivity can be adjusted.
First stop for auto position.
\bRain sensor maximum sensitivity.
Rain sensor minimum sensitivity.
When AUTO is selected on the lighting control
the side lamps and headlamps will turn on
automatically when ambient light fades.
With the control in the low beam position, high
beam will activate automatically when ambient
light falls below a pre set level. Vehicle speed
must be above 25 mph (40 km/h).
The headlamps can be set to temporarily
light your way when you exit the car at night.
Rotate the contol for exit delay periods of 30
seconds, 60 seconds or \f20 seconds.
1
432
Automatic car wash
Before entering an automatic car wash, turn the
wipers off to deactivate the rain sensor. Otherwise,
the wipers will operate during the washing process
and may be damaged.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 6

J A G U A R X FJ A G U A R X F J A G U A R X F
7
Starting and driving
Setting cruise control speed
Use to set cruise speed or increase/decrease
speed while cruise control is operating.
Resumes the set speed after a cancellation.
Cancels current setting but retains in memory.
Adaptive cruise control (ACC)
ACC can be programmed to maintain a set gap to the
vehicle ahead. If the vehicle ahead is travelling slower
than your set cruise control speed, your vehicle will
Cruise control override
Cruise control disengages when brakes are
applied or when speed is below \f8 mph (30 km/h).
automatically slow down and then maintain your set
gap until the road ahead clears. At that point your
vehicle will accelerate to the set cruise control speed.
ACC gap setting
Press to increase or decrease the set gap to the
vehicle ahead. An amber warning icon will illuminate
in the instrument panel. The message center will
display the current set gap. There are four gap
settings to choose from.
Forward alert
An additional feature of ACC, forward alert provides
limited detection of objects in the road ahead. When
necessary it will give an audible warning plus the
visual warning ‘FORWARD ALERT’ in the message
center. The driver must take appropriate action.
Press to activate the Forward Alert function.
The Forward Alert icon will illuminate in the
instrument panel.
Sensitivity of detection can be adjusted. With ACC
disengaged, usethe GAP SETTINGcontrol4to
adjust the setting.
Cruise control and forward alertSee page 3, items \band 28
5
1
2
4
3
Automatic speed limiter (ASL)See page 3, items \band 16
ASL allows any speed between \f8 and \f50 mph (30
km/h and 240 km/h) to be set as a maximum speed.
This is useful to ensure any given speed limit is not
exceeded.
Setting a speed
The setting procedure can be made
while the vehicle is stationary.
1. Press the ASL button. An ASL icon illuminates in the instrument panel.
\f. Use the cruise control + and \b control to set a speed. The
message center will display the set
speed. Adjustment can be made at
any time to suit variable speed
limits.If ASL is cancelled due to kick down acceleration or
by pressing the cruise control CANCEL, the
message center will display a ‘LIMITER
CANCELLED’ message.
Press the RESUME control to reinstate the ASL set
speed.
Driver intervention
When negotiating a steep downhill gradient,
vehicle speed may exceed the set speed. A
warning will be displayed in the message center.
Driver intervention
ACC IS NOT a collision warning or avoidance
system. Additionally the system WILL NOTdetect:
• Stationary or slow moving vehicles below 6 mph (\f0 km/h).
• Pedestrians or objects in the roadway.
• Oncoming vehicles in the same lane.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 7

8
J A G U A R X FJ A G U A R X F J A G U A R X F
Driving aids
Winter mode, Dynamic mode and Dynamic Stability
Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing
conditions.
Winter mode . Use in slippery road conditions.
Selects 2nd gear for driving away, moderates engine
response and modifies gear change strategy to
ensure maximum possible traction is achieved.
Dynamic mode. Optimises vehicle systems to
deliver a high performance driving experience. If
Sport mode is now used with paddle gear selection,
there is no automatic gear change, even if the rev
limit is reached. Dynamic mode remains selected for
six hours after the engine is switched off
DSC. The default condition at engine start is DSC
on and is designed to control vehicle stability.
TracDSC is an alternative setting that optimises the
DSC settings for maximum traction in difficult
conditions. TracDSC enables a more involving and
focused driving experience. To select TracDSC, press
and release the button. Touch again to return to DSC.
To turn DSC off, press for more than \f0 seconds.
Message center The message center displays the
JaguarDrive Selector position,
P,R,N,D orS, the manual mode
gear selections 1to 6and the
JaguarDrive Control mode
selection.
When TracDSC is selected, the DSC warning lamp
will illuminate and the message center will briefly
display TracDSC\b
When DSC OFF is selected, the DSC warning lamp
will illuminate and the message center will display
DSC OFF until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability
control, for examples of JaguarDrive settings.
1
2
3
JaguarDrive controlSee page 3, items 1\b,18and 1\f
Door mirrors and blind spot monitoring
Mirror dip when reversing
This feature can be used to improve lower side views
while reversing. It can be enabled or disabled via the
touch\bscreen. From the Homescreen, select Vehicle,
then Veh\b settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the
set dip position will be automatically selected. The
mirrors will return to their normal position when
another gear is selected.Blind spot monitoring
Each mirror displays amber icons to warn of
overtaking vehicles in adjacent lanes. The monitored
area extends approximately 20 ft (6 meters) behind
your rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above \f0 mph
(\f6km/h) while in a forward gear. An amber dot
illuminates when speed is below the threshold.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 8

J A G U A R X FJ A G U A R X F J A G U A R X F
9
Driving aids
WhenReverse is selected, the rear and front parking
aids and rear view camera will activate. To view the
parking aid graphic, touch the screen. Touch again for
the camera view.
The touch\bscreen will display a vehicle graphic and
indicate the approximate distance to any object
detected. An audible alert will increase in frequency
as the object is approached.
When moving forward into a space,
activate the front sensors with the parking
aid switch in the overhead panel.
Alternatively, select Rthen Drive.
Audible alert volume can be adjusted via the touch\b
screen. From the Homescreen, select Vehicle, then
Veh\b settings, then Parking. Use the + or \b softkeys
alongside Parking aid to adjust volume.Rear view camera
Is activated when Reverse is selected. A wide angle
camera view with guidance lines appears on the
touch\bscreen to aid reversing.
The camera is deactivated when Drive is selected
and vehicle speed exceeds \f0 mph (\f6 km/h).
NOTE: Sensors may activate when water, snow or ice
are detedted on the surface of the sensors. \bnsure
that the sensors are cleaned regularly.
Cancelling the parking aid screen
Touch the screen to return to the previous view.
Parking aids
Glovebox valet mode
To open the glovebox, press the facia mounted
switch.
Valet mode
The glovebox and trunk can be security locked to
deny access to a parking attendant. Before handing
over your Jaguar Smart Key, remove the emergency
key blade and keep it in a safe place.To set your personal security code:
• On the touch\bscreen select HomethenVehicle
followed by Veh\b settings.
• Now select Valet mode.
• Enter a four digit code and touch OK.Valet on is
displayed as a confirmation.
To deselect valet mode
Access the Valet mode screen and enter your
personal four digit code. Now press OK.Valet off is
displayed and the glovebox and trunk are now
accessible.
Insert the emergency key blade back into the Jaguar
Smart Key.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 9

J A G U A R X FJ A G U A R X F J A G U A R X F
11
Satellite radio
Satellite Radio subscription service
To activate the satellite radio, you must call the
service provider (Sirius) and provide them with the ID
details of your audio unit.
On the Audioscreen, Sat radio will be displayed in
place of HD radio .
To view the Sirius ID: 1\b Touch Sat Radio .
\f\b If subscription has not yet been made, a
screen will display the Sirius telephone
number and ID number.
3\b To subscribe, call the number displayed and
provide the ID number.
4\b Ensure you are parked in an area with clear
view of the sky while authorisation takes
place. Activation can take up to \f5 minutes.
Until you subscribe, the preview channel, currently
\f84, will be available for approximately 90 days.
To return to the previous screen, touch the arrow icon
at bottom right of the touch\bscreen.
Audio and touchscreen
Incompatible disc types
The use of discs with paper labels or dual format
discs (Dual Discs or DVD Plus) should be avoided
as they could become jammed inside the player.
Note : MP3 discs are not compatible with the single
disc CD player.
CD icons. Touch to select a loaded CD
Touch to pause play. Touch again to restart.
Touch for random play of CD tracks. Hold to
randomly play all loaded CD’s.
Repeat current track. Hold to repeat current CD.
Select Settings to view options for traffic
information and CD track related text.
\bTouch a softkey for previous or next track. Hold to
move through the current track.
Displays CD and track information.
6 disc CD player
12:26 pm
Audio
Sat Radio
CD
AM/FM
12 : 26 pm
Mix Repeat
Settings
Portable audio
1234 56
TP TA 3CHTr0100:32
7
1234
5
6
At any one time six CD’s can be loaded into the
player.
From the Homescreen, select AudiothenCD. Press
the CD LOADhardkey and follow screen instructions.
MP3 files on CD
The 6 disc CD palyer will play MP3 files.
Note: The player will take longer to load an MP3 disc.
To minimise loading time, a rigid folder structure is
recommended.
When a disc containing MP3 files is loaded and the
files have been stored in folders, an additional softkey
is displayed. Touch Foldersto view a list of MP3
folders. Select a folder to view the contents. Select a
track to begin play.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 11

12
J A G U A R X FJ A G U A R X F J A G U A R X F
Audio and touchscreen
Portable media Aux, iPod and USB
Audio volume.
Scroll through preset radio stations, CD tracks or
music folders.
Hold to select next/previous strong radio station or
next CD.
Audio mute or activates JaguarVoice.
Scroll through source options.
Steering wheel control audioSee page 3, item 3

1
34
2
Connecting ports for auxiliary devices, iPod and USB
storage devices are located inside the center console
cubby box.
iPod and USB devices can be operated from the
touch\bscreen. Devices connected to the AUX socket
are controlled only from the device itself.
The system will play MP3, WMA, WAV and AAC files
from a memory stick or a USB controlled MP3 player
or cell phone.
Some MP3 players use proprietary file systems that
are not supported by the vehicle system. MP3 players
must be set to Removable Device or Mass Storage
Device mode (see the manufacturer’s information).
Only music files added to the device while in this
mode can be played via the vehicle system.
The vehicle system will support USB devices with a
storage capacity up to 256GB.Using the Portable Audio Interface
From the Homescreen, select AudiothenPortable
audio . Select USBoriPod.
When a device is connected, touch Foldersto
display all search methods such as Playlist, artist,
Albums etc.
Continue through the folders to find the music you
want to play. Use the arrow icons to scroll through
the list.
Touch and hold this icon to expand details of
music being played.
Pause/Play, Mix, Repeat and Seek next/Previous are
similar to CD use.
Audio
Sat Radio
CD
AM/FM
12 : 26 pm
iPod AUX
Mix RepeatUSB
Settings
Folders
TP TA PTY DPLIITr 02
Portable audio
Diamond Dogs
01:36
Audio
12:26 pm
Tr
Artist
My ipod
AlbumSong
Playlist
01TP TA PTY DPLII00:36
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 12

Heating and ventilation
J A G U A R X FJ A G U A R X F J A G U A R X F
13
Climate controlSee page 3, item13
AUTO. Automatic mode. The climate control will
adjust air conditioning, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s). Fogging will be reduced.
Left and right hand sides temperature controls.
Temperature is displayed on the touch\bscreen.
Blower speed. Rotate to adjust airflow speed
through the vents.
DEF. Fastest method to remove frost or heavy
fogging from the windshield.
F\b Heated windshield.
\bR. Heated rear screen.
Recirculation. Helps prevent fumes from entering.
Touchscreen controls
To access touch\bscreen control, touch Climateon
the Home menu screen.
Auto. Automatic mode. The climate control will
adjust air conditioning, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s). Fogging will be reduced.
Air distribution to windshield, face or feet.
Temp sync. Synchronises all front and rear
settings to match the driver’s.
Front seats. Temperature and ventilation settings.
There are three settings each for heating and
cooling. Touch the up arrow for heated ventilation
and for raising temperature. Touch the down
arrow for cooled ventilation and for lowering
temperature.
The first touch of either arrow will initiate the
maximum setting. The setting will be indicated by
the number of illuminated red or blue LED’s.
Heated only seats (not shown)
There are three temperature settings. Touch the
seat icon to initiate.
• First touch \b maximum heat.
• Second touch \b intermediate.
• Third touch \b minimum.
• Fourth touch \b heating off.
The setting will be indicated by the number of
illuminated red LED’s.
Blower speed. For adjusting air flow speed
through the vents.
\bHeated steering wheel. Touch to turn on heat.
Touch again to turn off.
OFF. Turns climate control off and is replaced
with the ONsoftkey.
A/C. Select for economy mode. Turns off the air
conditioning compressor.
Settings. For personal settings.
Settings
T
emp.sync. External
62FAuto
5860F.5
F
AutoA/C
ON.5
Climate
12:26pm
Auto3
2
1
4564
9
8
7
Operating note
AUTO is the recommended operating mode. This
will help prevent fogging and reduce odours.
External water deposits
The air conditioning system removes moisture from
the air and deposits the excess water beneath the
vehicle. Puddles may form but this is normal and
no cause for concern.
Operating note
Seat heating and ventilating will operate only while
the engine is running. This is to prevent the battery
becoming discharged.
17645
2
3
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 13

1\f
J A G U A R X FJ A G U A R X F J A G U A R X F
Navigation
On initial activation, ensure that both the correct country and search area have been selected.
For more information refer to the \favigation section of the Owner’s Handbook.
Setting a destination
1\b From the navigation Menuscreen, select
Destination Entry .
\f\b Touch Address.
3\b Touch Townthen use the on\bscreen keypad to
enter address details. As each part of the address
is displayed, select from the list to confirm.
4\b When entry is complete, touch OK. If required,
fine tuning can be made with the target arrows.
5\b Touch Destination to begin calculation of the
route options.
6\b The screen displays Route 1. To view
alternative routes touch 3 Route. To use an
alternative route, touch one of the selections.
7\b Touch Startto commence guidance.
The selected route will be displayed and guidance will
begin. When your destination is reached, voice and
visual confirmation is given.
As well as the main navigation touch\bscreen, there is
a facility that utilises the message center screen in
the instrument pack. Once you have set a destination
If the map is moved away from your
current location, the position icon will be
replaced by a touch button near the top left of the
screen. Touch to bring the current location map back into view.
Cancelling guidance
To cancel guidance, touch Menu, Route Optionsand
then Cancel Guidance.
Message center navigation
Touchscreen navigation
Touch this icon to repeat the last voice
instruction. To deselect voice guidance go to
the navigation Menuscreen then select Auto Voice
Guidance Off .
and commenced guidance, a simplified graphic guide
is displayed giving basic turn by turn information
about the next part of the journey.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 14

Bluetooth telephone
J A G U A R X FJ A G U A R X F J A G U A R X F
15
Compatible Bluetooth cell phones can communicate
with the vehicle’s inbuilt telephone system.
Connection must be made with ignition on or engine
running.
Pairing and connecting using the touchscreen
Up to 5 cell phones can be paired to the vehicle
system. Before starting the pairing process, ensure
your Bluetooth phone is in ‘discoverable’ mode,
sometimes referred to as ‘find me’ mode. See your
operating instructions for more information.
1\b From the touch\bscreen HOME MENU, select
Comms orPhone. A new menu will be displayed.
\f\b Select Settings thenSearch new\b
3\b Select your cell phone from the list.
4\b When prompted, enter the displayed four digit
code into your cell phone. See your operating
instructions for more information.
5\b Confirmation of connection will be displayed.
Changing a connected phone
To change from the currently connected cell phone to
another that has already been paired, follow the
steps below:
1\b From the HOME MENU, select CommsorPhone .
\f\b Select Settings thenChange phone .
3\b Select a phone and select the corresponding
Dock option.
Automatic downloading of phonebook entries
The vehicle phonebook can be updated each time a
cell phone is docked to the system.
1\b Select Settings thenPhone options .
\f\b Select Phonebook .
3\b Select Auto download Off orOn.
Jaguar Bluetooth Connectivity
For the latest compatibility information, refer to
www\bjaguar\bcom/us/en/xf/models_pricing/features
/features_convenience\bhtm\bCalls via the touchscreen
Making a call
1\b With a paired and active phone, select Phoneor
Comms from the Home screen.
\f\b From the Digit Dial screen, enter the number
using the on\bscreen keypad.
3\b Touch icon on the screen to make the call.
4\b To end a call touch .
Calls via the steering wheel controls
Press and hold the Sourcehardkey to access
phone mode on the touch\bscreen and
message center
.
Use the scroll control to find the desired
phonebook contact.
Press to dial or answer a call. Press again to
end a call.
Telephone echo
If echo is experienced when using the phone,
reduce the audio system volume during the call.
Phone
12:26 pm
Last Names Phone
Digit Dial
Options
Settings
31
2
Bluetooth selection
When the starter is turned on, the vehicle searches
for up to 5 previously connected phones, starting
with the most recent connection.
Bluetooth® cell phones
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 15