ESP JAGUAR XF 2013 1.G Quick Start Guide

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
JaguarDrive control See page 2, items 17, 20 and 21 Parking aids
Glovebox valet mode
Door mirrors and blind spot monitoring
Driving aids Driving aids
Winter mode, Dynamic mode and Dynamic Stability
Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing conditions.
Winter mode.
1. Use in slippery road conditions.
Selects 2nd gear for driving away, moderates engine
response and modifies gear change strategy to ensure
maximum possible traction is achieved.
Dynamic mode.
2. Optimises vehicle systems to
deliver a high performance driving experience. If Sport
mode is now used with paddle gear selection, there is no
automatic gear change, even if the rev limit is reached.
Dynamic mode remains selected for 6 hours after the
engine is switched off
DSC.
3. The default condition at engine start is DSC on
and is designed to control vehicle stability.
2
13
TracDSC is an alternative setting that optimises the
DSC settings for maximum traction in difficult conditions.
TracDSC enables a more involving and focused driving
experience. To select TracDSC, press and release the
button. Touch again to return to DSC. To turn DSC off,
press for more than 10 seconds.
Message center
The Message center displays the
JaguarDrive Selector position,
P, R, N, D or S, the manual mode
gear selections 1 to 6 (or 1 to 8)
and the JaguarDrive Control mode
selection.
When TracDSC is selected, the DSC warning lamp will
illuminate and the Message center will briefly display
TRAC DSC.
When DSC OFF is selected, the DSC warning lamp will
illuminate and the Message center will display DSC OFF
until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability
control, for examples of JaguarDrive settings.
Blind spot monitoring
Each mirror displays amber icons to warn of overtaking
vehicles in adjacent lanes. The monitored area extends
approximately 20 ft (6 meters) behind your rear wheels
and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above 10mph
(16km/h) while in a forward gear. An amber dot
illuminates when speed is below the threshold.
Mirror dip when reversing
This feature can be used to improve lower side views
while reversing. It can be enabled or disabled via the
touch screen. From the Home screen, select Vehicle,
then
Veh.
settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb
and vehicle.
Subsequently, each time reverse gear is selected, the set
dip position will be automatically selected. The mirrors
will return to their normal position when another gear is
selected.
8 9
When Reverse is selected, the rear and front parking
aids and rear view camera will activate.
The touch screen will display a vehicle graphic and
indicate the approximate distance to any object
detected. An audible alert will increase in frequency as
the object is approached.
When moving forward into a space,
activate the front sensors with the
parking aid switch in the overhead panel.
Alternatively, select R then Drive.
Audible alert volume can be adjusted via the touch
screen. From the Home screen, select Set-up, then
System, then Volume presets. Use the + or - soft keys
alongside Parking aid to adjust volume.
Cancelling the parking aid screen
Touch the screen to return to the previous view. Rear view camera
Activates when Reverse is selected. Guidance lines to
aid reversing appear on the touch screen. The camera
display has priority over the parking aid display. To view
the parking aid display instead, or cancel the display at
any time, touch the display.
Note: Sensors may activate when water, snow or ice are
detected on the surface of the sensors. Ensure that the
sensors are cleaned regularly.
To open the glovebox, press the facia mounted switch.
Valet mode
The glovebox and luggage compartment can be security
locked to deny access to a parking attendant. Before
handing over your Smart Key, remove the emergency key
blade and keep it in a safe place.
To set your Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a your 4 digit PIN (personally chosen) and touch
OK. Valet on is displayed as a confirmation.
To deselect valet mode
Access the Valet screen and enter your 4 digit PIN. Now
press OK. Valet off is displayed and the glovebox and
luggage compartment are now accessible.
Insert the emergency key blade back into the Smart Key.
Powerfold mirrors - See page 2, item 31
Press buttons simultaneously to fold the mirrors
inward. Press again to unfold.
JJM189640131.indd 8-901/08/2012 13:45:15

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
NavigationTelephone
1415
Touch screen navigation Bluetooth® phones See page 2, item 3
Telephone echo
If echo is experienced when using the phone, reduce
the audio system volume during the call.
On initial activation, ensure
that both the correct country
and search area have been
selected.
For more information refer to
the Navigation section of the
Owner’s Handbook.
Note: To access navigation press either the NAV hard
key or touch the Nav icon on the Home menu. Use to enter a new destination. Provides a choice of
1. options when entering a destination.
Displays previous destinations entered.
2. Previous
destinations can be selected as a new destination.

3. Turns the POI (Point Of Interest) icons on the map
on/off.
When a destination is set, the Jaguar logo in this
4. position is replaced by a soft key which enables the last
voice instruction to be repeated.
Soft key is highlighted while voice guidance is
5. enabled. Touch to turn voice guidance off.
POI shortcuts: Touch icon to list available POIs that
6. are close to the vehicle position.
Calculates a detour from the current route.
7.
Advances to the main map screen.8.
Use the 9. More... soft key to toggle between menu 1
of 2 and menu 2 of 2. Menu 2 of 2 features soft keys for
Stored locations, TMC, Route options and Nav set-up.
Stored locations is used to manage the stored data.
TMC (Traffic Message Channel) will provide data about
road conditions and any events that may affect the
current route.
Route options allows the selection of various options for
the route.
Nav set-up is for setting personal preferences within the
navigation system.
Cancel current route guidance.
10.
Selecting navigation
When navigation is selected after the ignition is turned
on, a caution screen is displayed. Touch Agree.
Note: At the first time of accessing the caution screen,
set the required language.
Setting a destination
Select Destination entry.
Select Address and enter address details using the
keyboard. As each part of the address is refined, touch
OK or List to display all the streets and towns that are
available to be selected. If the house number is not
known, press OK, the mid-point of the road is then used
as the destination.
When the address entry fields are complete, press OK to
move to the map screen.
Start guidance
When in the map screen touch GO to start guidance.
Review route.
There will be a choice of 3 routes or Change route. 3
routes will display 3 different route options on the map.
Select Route 1, 2 or 3 by touching the respective box
displayed on the right side of the map and then select
GO.
Calls via the touch screen
With a phone paired and active, press the PHONE button
below the touch screen.
Select
1. Digit Dial, Phonebook or Last 10.
With Digit Dial selected, use the keypad to enter the
number.
With Phonebook selected, chose a number from the
downloaded phonebook.
Last 10 displays the previous 10 calls. Choose one to
dial.
To make the call touch the connect icon .
2. The icon will change to a connected call icon.
To end a call touch
3. .
Connection must be made with ignition on or engine
running.
Use the following procedure in conjunction with your
phone manufacturer’s instructions.
Pairing and connecting using your phone
Note: The process of pairing and connecting a phone
to the vehicle will vary depending on the type of phone
used.
Switch the ignition on and ensure that the touch
1. screen is active.
From the
2. Home menu, select Phone.
The
3. Phone menu will display. If no phone is
connected, select Search new, otherwise select Change
phone and then select Search new.
Select
4. Device to vehicle option.
NOTE: The vehicle’s Bluetooth® wireless technology
system is discoverable for only 3 minutes. Using your phone, search for Bluetooth® wireless
5. technology devices. On some phones, this is referred
to as new paired device. See your phone’s operating
instructions for further information.
When the vehicle’s system is discovered, begin the
6. pairing process and follow the on-screen instructions.
When requested, enter a PIN of your choice into your
7. phone and the vehicle system.
Once your phone is paired it may automatically
8. connect to the vehicle system. If not, use the device list
shown on the touch screen or use your phone.
NOTE: Some phones require the pairing to be set as
‘authorised’ or ‘trusted’ in order to automatically connect.
Please refer to your phone’s operating instructions for
further information.
Downloading phonebook entries
When a phone with phonebook download capability
is paired and docked, its phonebook directory can be
automatically downloaded to the vehicle system.
See PHONEBOOK in the Owner’s Handbook for more
information.
Phonebook
Last 10
Phone10:36
Digit Dial Settings
DeleteChange
phone
Name
01234567890_
Use
handsetPQRS
TUVWXYZ
1ABC
DEF
JKL MNO
GHI2
3
4 5
6
7 8
9
0 #
+
Calls via the steering wheel controls
Volume control. Turn to increase/decrease call 1.
volume.
Scroll control. Turn to scroll up/down lists of calls or
2. phone book entries.
Phone/Voice control. Press and release to send,
3. accept or end a call. If Voice control is not fitted, in
addition to the above, press and release to access Last
10 dialed list; press and hold to access the phonebook
search view.
2
3
1
JJM189640131.indd 14-1501/08/2012 13:45:21

JAGUAR XF JAGUAR XF JAGUAR XF
Part No. JJM 18 96 40 131 © Jaguar Cars Limited 201216
Gas station information
Gas filler location
Gas filler flap opening
The fuel filler flap can be opened only when the vehicle is
unlocked. Press the fuel filler flap firmly approximately 1.4
in (35mm) from the rear edge and release.
Gas cap
Twist the cap counter-clockwise to release.
A hook is provided on the flap hinge to hold the cap while
refuelling. After refuelling, tighten the cap until it clicks 3
times.
Fuel specification
The correct fuel specification for your vehicle is shown on
the inside of the gas filler flap.
A small arrow on the gas gauge indicates
which side the gas filler is located.
Incorrect fuelling
Do not use E85 fuels (85% Ethanol content).
Equipment necessary for the use of fuels containing
more than 10% Ethanol is not fitted to this vehicle. If
E85 fuels are used serious engine and fuel system
damage will occur.
Avoid using fuel containing Methanol. If it is
unavoidable, do not use a fuel with more than
10% Methanol content. The fuel must contain
co-solvents and corrosion inhibitors. Fuel system
damage and engine performance problems can
occur when Methanol is used.
No responsibility is accepted for damage caused by
using incorrect fuels.
If the vehicle is filled with the wrong type of fuel:
• DO NOT start the engine!
• Call for qualified assistance!Hood release
The hood release is located in the left side front footwell.
Tire pressure label location
Tire pressures are shown on a label attached to the left
side center doorpost.
JJM189640131.indd 1601/08/2012 13:45:22