Anit JAGUAR XJ6 1994 2.G Electrical Diagnostic Manual

rl Electrical
15.4.4 STEERING COLUMN /MIRROR
The steering column / mirror adjustment system comprises the following components:
0 Column tilt motor; up / down
0 Column reach motor; fore / aft
0 Column joystick switch; multi-directional
0 Driver’s mirror motors; horizontal and vertical movement
0 Passenger’s mirror motors; horizontal and vertical movement
0 Mirror joystick switches; driver and passenger - multi-directional
0 Column Mirror Control Module (C / M CM)
15.4.4.1 Column Motors
Thetwo column position adjustment motorsare mounted on the column as embly (one laterally d
one transversely)
allowing both vertical and reach distance adjustment. Each motor unit incorporates a potentiometer which provides
directional movement position control via feedback voltage variations to the
C / M CM. Positional variations are acti- vated by the C / M CM in response to signals from the joy-stickswitch mounted on the left-hand side of the column.
15.4.4.2
The column joy-stickswitch provides control of the column position in all directions. Adjustment of theswitch position
will result in a corresponding movement of the column. This switch also allows the selection of ‘Auto Mode’to enable
the Exit / Entry Mode facility.
Column Joy-stick Switch (Fig. 1 inset)
1. Tilt motor 2. Flexible coupling
3 lanition switch
1
J86-1904
Ifeach motor
Fig. 1 Steering Column Assembly 4
issue 1 August 1994 15.4 - 8 X300 EDM