bulb JEEP COMMANDER 2007 1.G Owners Manual

JEEP COMMANDER 2007 1.G Owners Manual COMMANDER 2007 1.G JEEP JEEP https://www.carmanualsonline.info/img/16/7063/w960_7063-0.png JEEP COMMANDER 2007 1.G Owners Manual

Page 16 of 456

JEEP COMMANDER 2007 1.G Owners Manual light will come on for 3 seconds immediately after the
ignition switch is turned on for a bulb check. Afterwards,
if the bulb remains on, this indicates a malfunction in the
electronics. If the bulb b

Page 69 of 456

JEEP COMMANDER 2007 1.G Owners Manual Safety Checks You Should Make Inside The
Vehicle
Seat Belts
Inspect the belt system periodically, checking for cuts,
frays and loose parts. Damaged parts must be replaced
immediately. Do not disassemb

Page 176 of 456

JEEP COMMANDER 2007 1.G Owners Manual INSTRUMENT CLUSTER DESCRIPTION
1. Speedometer
Indicates vehicle speed.
2. Brake Warning Light
The BRAKE warning light will come on when
the ignition is first turned on, and stay on
briefly as a bulb c

Page 177 of 456

JEEP COMMANDER 2007 1.G Owners Manual engine start. If the bulb does not come on when turning
the key from OFF to ON, have the condition checked
promptly.
Certain conditions such as a loose or missing gas cap,
poor fuel quality, etc. may

Page 182 of 456

JEEP COMMANDER 2007 1.G Owners Manual 18. Seat Belt Reminder Light
When the ignition switch is first turned ON, this
light will turn on for 5 to 8 seconds as a bulb check.
During the bulb check, if the driver’s seat belt is
unbuckled, a

Page 183 of 456

JEEP COMMANDER 2007 1.G Owners Manual is placed in the P (Park) position. The light should turn
off. If the light remains lit with the engine running your
vehicle will usually be drivable, however, see your dealer
for service as soon as p

Page 354 of 456

JEEP COMMANDER 2007 1.G Owners Manual ▫Air Conditioner Maintenance.............371
▫Power Steering Fluid Check..............372
▫Body Lubrication.....................373
▫Windshield Wiper Blades................374
▫Windshield Wa

Page 360 of 456

JEEP COMMANDER 2007 1.G Owners Manual Normally, the OBD system will be ready. The OBD
system maynotbe ready if your vehicle was recently
serviced, if you recently had a dead battery, or a battery
replacement. If the OBD system should be d

Page 401 of 456

JEEP COMMANDER 2007 1.G Owners Manual REPLACEMENT BULBS
Interior Lights Bulb Type
Glove Box Light......................... 194
Grab Handle Light................L002825W5W
Overhead Console Reading Lights..........VT4976
Rear Cargo Light...

Page 439 of 456

JEEP COMMANDER 2007 1.G Owners Manual Special Additives...................... 387
Torque Converter...................... 262
Autostick............................. 258
Auxiliary Electrical Outlet (Power Outlet)...... 162
Auxiliary Power O
Page:   1-10 11-20 next >