JEEP COMMANDER 2010 1.G Owners Manual

JEEP COMMANDER 2010 1.G Owners Manual COMMANDER 2010 1.G JEEP JEEP https://www.carmanualsonline.info/img/16/7066/w960_7066-0.png JEEP COMMANDER 2010 1.G Owners Manual
Trending: lane assist, brake, oil change, wheel size, audio, wiring, dimensions

Page 131 of 460

JEEP COMMANDER 2010 1.G Owners Manual NOTE:HomeLink is disabled when the Vehicle Secu-
rity Alarm is active.
WARNING!
•Your motorized door or gate will open and close
while you are training the Universal Transceiver.
Do not train the t

Page 132 of 460

JEEP COMMANDER 2010 1.G Owners Manual Programming HomeLink
Before You Begin
If you have not trained any of the HomeLinkbuttons,
erase all channels before you begin training.
To do this, press and hold the two outside buttons for up
to 2

Page 133 of 460

JEEP COMMANDER 2010 1.G Owners Manual NOTE:Some gate operators and garage door openers
may require you to replace Step 3 with procedures noted
in the “Gate Operator/Canadian Programming” section.
4. Press and hold the just-trained Hom

Page 134 of 460

JEEP COMMANDER 2010 1.G Owners Manual 6. Firmly press and release the “LEARN” or “TRAIN-
ING” button. The name and color of the button may vary
by manufacturer.
NOTE:There are 30 seconds in which to initiate the next
step after th

Page 135 of 460

JEEP COMMANDER 2010 1.G Owners Manual If you unplugged the device for training, plug it back in
at this time.
Then proceed with Step 4 under “Programming
HomeLink” earlier in this section.
Using HomeLink
To operate, simply press and

Page 136 of 460

JEEP COMMANDER 2010 1.G Owners Manual Troubleshooting Tips
If you are having trouble programming HomeLink, here
are some of the most common solutions:
•Replace the battery in the original transmitter.
•Press the learn button on the g

Page 137 of 460

JEEP COMMANDER 2010 1.G Owners Manual POWER SUNROOF — IF EQUIPPED
The power sunroof switch is located on the overhead
console.WARNING!
•Never leave children in a vehicle with the key in
the ignition switch. Occupants, particularly una

Page 138 of 460

JEEP COMMANDER 2010 1.G Owners Manual Opening Sunroof — Express
Press the switch rearward and release, and the sunroof
will open automatically from any position. The sunroof
will open fully, then stop automatically. This is called
“Ex

Page 139 of 460

JEEP COMMANDER 2010 1.G Owners Manual Sunshade Operation
The sunshade can be opened manually. However, the
sunshade will open automatically as the sunroof opens.
NOTE:The sunshade cannot be closed if the sunroof is
open.
Wind Buffeting
Wi

Page 140 of 460

JEEP COMMANDER 2010 1.G Owners Manual NOTE:Hold onto shade handle until shade is com-
pletely open or closed.ELECTRICAL POWER OUTLETS
Your vehicle is equipped with 12 Volt power outlets that
can be used to power cellular phones, small ele
Trending: reset, phone, buttons, oil filter, mirror, brakes, keyless entry