keyless entry JEEP PATRIOT 2017 1.G Owners Manual

KEYS
Your vehicle uses keyless ignition system. The ignition
system consists of a key fob with a Remote Keyless Entry
(RKE) and an ignition switch. The keyless ignition system
consists of a key fob and Keyless Enter-N-Go button.
A Word About Your Keys
The authorized dealer that sold you your new vehicle has
the key code numbers for your vehicle locks. These num-
bers can be used to order duplicate Remote Keyless Entry
(RKE) key fobs. Ask your authorized dealer for these
numbers and keep them in a safe place.
Locking Doors With A Key
You can insert the key with either side up. To lock the door,
turn the key to the right. To unlock the door, turn the key
to the left. Refer to ”Body Lubrication” in Dealer Service”
in “Servicing And Maintenance” for further information.
To Unlock The Doors And Liftgate
Push and release the unlockbutton on the key fob
once to unlock the driver ’s door or twice within five
seconds to unlock all doors and liftgate. The turn signal
lights will flash to acknowledge the unlock signal. The
illuminated entry system will also turn on.
Key Fob Unlock, Driver Door/All First Press
This feature lets you program the system to unlock either
the driver ’s door or all doors on the first push of the unlock
button on the key fob. To change the current setting,
proceed as follows:
• For vehicles equipped with the instrument cluster dis-
play, refer to “Instrument Cluster Display/Personal Set-
tings (Customer-Programmable Features)” in “Getting
To Know Your Instrument Panel” for further informa-
tion.
Key Fob
3
GETTING TO KNOW YOUR VEHICLE 19

NOTE:•If the indicator light stays on constantly, programming
is complete and the garage door/device should acti-
vate when the HomeLink button is pushed.
• To program the two remaining HomeLink buttons,
repeat each step for each remaining button. DO NOT
erase the channels.
If you unplugged the garage door opener/device for
programming, plug it back in at this time.
Reprogramming A Single HomeLink Button
(Canadian/Gate Operator)
To reprogram a channel that has been previously trained,
follow these steps:
1. Cycle the ignition to the ON/RUN position.
NOTE: For vehicles equipped with Keyless Enter-N-Go,
place the ignition in the RUN position with the engine ON.
Make sure while programming HomeLink with the engine
ON that your vehicle is outside of your garage, or that the
garage door remains open at all times.
2. Push and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds. Do not
release the button. 3.
Without releasing the button, proceed with
“Canadian/Gate Operator Programming” step 2 and
follow all remaining steps.
Using HomeLink
To operate, push and release the programmed HomeLink
button. Activation will now occur for the programmed
device (i.e. garage door opener, gate operator, security
system, entry door lock, home/office lighting, etc.) The
hand-held transmitter of the device may also be used at
any time.
Security
It is advised to erase all channels before you sell or turn in
your vehicle.
To do this, push and hold the two outside buttons for 20
seconds until the red indicator flashes.
NOTE: All channels will be erased. Individual channels
cannot be erased.
The HomeLink Universal Transceiver is disabled when the
Vehicle Security Alarm is active.
82 GETTING TO KNOW YOUR VEHICLE

Dimmer Switch, Headlight.....................47
Dipsticks Power Steering ......................... .213
Disposal Antifreeze (Engine Coolant) .................296
Door Locks Child-Protection Door Lock — Rear Doors .......32
Door Locks ..............................28
KeyFob................................28
Remote ................................28
Remote Keyless Entry ......................28
Door Locks, Automatic .......................30
Door Opener, Garage .........................77
Downshifting ............................ .202
Driver’s Seat Back Tilt ........................35
Driving ................................. .233
Off-Pavement .......................... .233
Off-Road ............................. .233
Electrical Power Outlets .......................87
Electric Remote Mirrors .......................45
Electronic Brake Control System ................131
Anti-Lock Brake System ....................130
Electronic Roll Mitigation ...................138
Traction Control System ....................134 Electronic Speed Control (Cruise Control)
.........214
Electronic Stability Control (ESC) ...............134
Electronic Throttle Control Warning Light .........103
Emergency, In Case Of Jacking ........................... .249, 302
Jump Starting .......................... .265
Towing ............................... .272
Emission Control System Maintenance ............127
Engine .............................. .282, 283
Air Cleaner ............................ .289
Block Heater ........................... .197
Break-In Recommendations .................197
Checking Oil Level ...................... .284
Coolant (Antifreeze) ................284, 293, 336
Cooling ........................... .284, 292
Exhaust Gas Caution ...................189, 334
Jump Starting .......................... .265
O

il ........................... .286, 335, 336
Oil Filler Cap .....................282, 283, 286
Oil Filter .............................. .287
Oil Selection ........................... .286
Oil Synthetic ........................... .287
Overheating ........................... .268
Enhanced Accident Response Feature .........172, 274
Ethanol ................................. .331
12
INDEX 407