Set button KIA FORTE 2017 Repair Manual

4 230
Features of your vehicle
SiriusXM Radio Mode
Radio Mode Display Controls
(1) Mode Display
Displays current operating mode.
(2) Channel Information
Displays the category, channel num-
ber, channel name, artist and title
information.
(3) Preset
Displays current playing preset
number [1] ~ [6].
(4) Preset Display
Displays saved presets.
(5) Info
Displays detailed information about
the current broadcast.Using SiriusXM Satellite Radio
Your Kia vehicle is equipped with a 3-
month trial subscription to SiriusXM
so you have access to over 140
channels of music, information, and
entertainment programming.
Activation
In order to extend or reactivate your
Sirius Select subscription, you will
need to contact SiriusXM Customer
Care at 1-800-643-2112. Have your
12-digit RID (Radio Identification Number)
/ESN (Electronic Serial Number) ready. To
retrieve the RID/ESN, turn on the radio,
press the [RADIO]button, and tune to
channel zero.
Please note that the vehicle will need
to be turned on, in Sirius mode, and
have an unobstructed view of the sky
in order for the radio to receive the
activation signal.

231 4
Features of your vehicle
Seek
Press the [SEEK/TRACK]button to
play the previous/next channel.
❈If the “Category” icon is displayed,
channels are changed within the
current category.
Tune
Turn the TUNEknob to select the
desired channel.
Scan
Press the [SCAN]button to scan all
channels with superior reception for
5 seconds each.
Once scan is complete, the previous-
ly played channel will be restored.
During Scan, pressing the [SCAN]
button again will cancel the scan
operation and restore the previously
played channel.
If the “Category” icon is displayed,
channels are changed within the cur-
rent category.Searching Categories
Select the category by using the
[CAT/FOLDER]button and press the
TUNEknob to select.
Channels for the selected category
are played.
✽Troubleshooting
1. Antenna Error
If this message is displayed, the
antenna or antenna cable is bro-
ken or unplugged. Please consult
with your Kia dealership.
2. No Signal
If this message is displayed, it
means that the antenna is covered
and that the SiriusXM Satellite
Radio signal is not available.
Ensure the antenna is uncovered
and has a clear view of the sky.
Selecting Presets/Saving Presets
Press the [Preset] to display the
broadcast information for the chan-
nel saved to each button.
Press the [1] ~ [6] to play the desired
preset.
While listening to a channel you want
to save as a preset, press and hold
one of the [1] ~ [6] to save the current
channel to the selected preset.

4 232
Features of your vehicle
Media Mode
Media Mode Screen
Pressing the [MEDIA]button will
change the operating mode in the
order of CD
➟ USB(iPod®)➟ AUX ➟
My Music ➟BT Audio.
If [Mode Pop up] is turned on within
[SETUP]button[Display], then
pressing the [MEDIA]button will dis-
play the Media Mode Pop up screen.
Turn the TUNEknob to move the
focus. Press the knob to select.
The media Mode Pop up screen can
be displayed only when there are two
or more media modes turned on.
Mode Display on the Status Bar
When a Bluetooth®Wireless Technology,
iPod®, USB, or AUX device is con-
nected or a CD is inserted, the cor-
responding mode icon will be dis-
played.
IconTitle
Bluetooth®Wireless Technology
CD
USB(iPod®)
AUX

245 4
Features of your vehicle
With the My Music Mode
Playing/Pausing My Music Files
While playing, press the [II] to pause
and press [] to play.
If there are no files saved within My
Music, the [My Music] will be dis-
abled.
Changing Files
Press the [SEEK/TRACK]button to
move to the previous or next file.
Pressing the [
SEEK/TRACK
∨]but-
ton after the file has been playing for
2 seconds will start the current file
from the beginning.
Pressing the [
SEEK/TRACK
∨]but-
ton before the file has been playing
for 1 second will start the previous
file.Selecting from the List
Turn the TUNEknob left/right to
search for the desired file.
Once you find the desired file, press
theTUNEknob to start playing.
From the List screen, it is possible to
delete files you previously saved into
My Music.List Menu
(1) Moves to the previous screen.
(2) Selects all files.
(3) Unselects all selected files.
(4) Deletes selected files.
After selecting the files you want to
delete, press the [Delete] to delete
the selected files.
If there is memory available, up to
6,000 files can be saved. Identical
files cannot be copied more than
1,000 times.
To check memory information, go to
[SETUP]button
[System]

[Memory Information]
Rewinding/Fast-forwarding Files
While playing, press and hold the
[SEEK/TRACK]button to rewind or
fast-forward the current file.
Scan
Press the [SCAN]button to play the
first 10 seconds of each file.

4 246
Features of your vehicle
MENU:Bluetooth®Wireless
Technology Audio
Using Bluetooth®Wireless Technology
Audio Mode
Playing/Pausing Bluetooth®Wireless
Technology Audio
Once a
Bluetooth®Wireless Technology
device is connected, the mode will
automatically start.
While playing, press the [
II]to
pause and press [
II] to play.
The play/pause feature may operate
differently depending on the mobile
phone.Changing Files
Press the [SEEK/TRACK]button to
move to the previous or next file.
Setting Connection
If a
Bluetooth®Wireless Technology
device has not been connected, press
the[SETUP]button[Phone]
to dis-
play the
Bluetooth®Wireless
Technology connection screen.
It is possible to use the pair phone,
connect/disconnect and delete fea-
tures from your
Bluetooth®Wireless
Technology phone.
If music is not yet playing from your
mobile device after converting to
Bluetooth®Wireless Technology
Audio mode, pressing the play button
once may start playing the mode.
Check to see that music is playing
from the
Bluetooth®Wireless
Technology device after converting
to
Bluetooth®Wireless Technology
Audio Mode.

247 4
Features of your vehicle
Phone Mode
Making a call using the Steering
wheel controls
❈The actual features in the vehicle
may differ from the illustration.
(1) Mutes audio volume.
(2) Each time this button is pressed,
the mode is changed in the order of
FM1➟ FM2➟ AM➟ SAT1 ➟ SAT2
➟ SAT3 ➟ CD➟ USB(iPod
®)➟
AUX ➟ My Music ➟ BT Audio.
If the media is not connected or a
disc is not inserted, correspon-
ding modes will be disabled.
(3) Used to control volume.(4) When pressed shortly
- Radio mode: Searches broad-
cast frequencies saved to pre-
sets.
- Media(CD/USB/iPod
®/My Music/
BT Audio) modes: Changes the
track, file or chapter.
When pressed and held
- Radio mode, automatically
searches broadcast frequencies
and channels.
- Media(CD/USB/iPod
®/My Music)
modes, rewinds or fast forwards
the track or song(file).
- BT Audio mode may not be sup-
ported in some mobile phones.
(5) When pressed shortly
- Starts voice recognition.
- When selecting during a voice
prompt, stops the prompt and
converts to voice command wait-
ing state.
When pressed and held
- Ends voice recognition.(6) When pressed shortly
- When pressed in the phone
screen, displays call history
screen.
- When pressed in the dial screen,
makes a call.
- When pressed in the incoming
call screen, answers the call.
- When pressed during call wait-
ing, switches to waiting call (Call
Waiting).
When pressed and held
- When pressed in the
Bluetooth®
Wireless Technology Handsfree
wait mode, redials the last call.
- When pressed during a
Bluetooth®
Wireless Technology Handsfree
call, switches call back to mobile
phone. (Private)
- When pressed while calling on
the mobile phone, switches call
back to
Bluetooth®Wireless
Technology Handsfree. (Operates
only when
Bluetooth®Wireless
Technology Handsfree is con-
nected)
(7) Ends phone call.

249 4
Features of your vehicle
✽NOTICE
If Bluetooth®Wireless Technology
devices are paired but none are cur-
rently connected, pressing the
[PHONE]button or the [CALL]
but-
ton
on the steering wheel control dis-
plays the following screen. Press the
[Pair] to pair a new device or press the
[Connect]
to connect a previously
paired device.
Pairing through [PHONE] Setup
Press the [SETUP]button
Select
[Phone].
Pair Phone
The following steps are the same as
those described in the section “When
No Devices have been Paired” on the
previous page.
Paired Phone List
Press the [SETUP]button
Select
[Phone]
Select[Pair Phone List].
• Connected Phone: Device that is
currently connected.
• Paired Phone: Device that is paired
but not connected.
Connecting a Device
From the paired phone list, select the
device you want to connect and
press the [Connect](1).

251 4
Features of your vehicle
Phone Menu Screen
Phone Menus
With a
Bluetooth®Wireless Technology
device connected, press the
[PHONE]button to display the
Phone menu screen.
• Favorites: Up to 20 frequently used
contacts can be saved for easy
access.
• Call History: Displays the call histo-
ry list screen.
• Contacts: Displays the Contacts
list screen.
• Dial Number: Displays the dial
screen where numbers can be
dialed to make calls.
• Setup: Displays Phone related set-
tings.
✽NOTICE
• If you press the [Call History] but
there is no call history data, a
prompt is displayed which asks to
download call history data.
• If you press the [Contacts] but there
is no contact data stored, a prompt is
displayed which asks to download
contacts data.
• This feature may not be supported in
some mobile phones. For more infor-
mation on download support, refer
to your mobile phone user’s manual.Favorites
• Saved favorite contact: Connects
call upon selection.
• To add favorite: Downloaded con-
tacts be saved as favorite.
• Delete All: Deletes all stored
favorite contacts.
✽NOTICE
• To save Favorite, contacts should be
downloaded.
• Contact saved in Favorites will not be
automatically updated if the contact
has been updated in the phone. To
update Favorites, delete the Favorite
and create a new Favorite.

255 4
Features of your vehicle
Voice Recognition Mode
Using Voice Recognition
Starting Voice Recognition
Shortly press the button on the
steering wheel controls. Say a com-
mand.
If prompt feedback is in [ON], then
the system will say “Please say a
command after the beep (BEEP)”.
• If prompt feedback is in [ON]
mode, then the system will only
say “(BEEP)”.
• To change Prompt Feedback
[ON]/[OFF], go to [SETUP]button
[System][Prompt Feedback].
For proper recognition, say the com-
mand after the voice instruction and
beep tone.
✽NOTICE
Contact List Best Practices
1) Do not store single-name entries.
(e.g., “Bob”, “Mom”, “Kim” etc.)
Instead, always use full names
(including first and last names)
for all contacts. (e.g., use “Jacob
Stevenson” instead of “Dad”)
2) Do not use abbreviations. (i.e., use
“Lieutenant” instead of “Lt.” or
“Sergeant” instead of “Sgt.”)
3) Do not use acronyms. (i.e., use
“County Finance Department”
instead of “CFD”)
4) Do not use special characters.
(e.g., “@”, “hyphen -”, “aster-
isk*”, “ampersand &”)
5) If a name is not recognized from
the contact list, change it to a
more descriptive name. (e.g., use
“Grandpa Joseph” instead of “Pa
Joe”)
Skipping Prompt Messages
While prompt message is being stat-
edShortly press the button on
the steering wheel controls.
The prompt message is immediately
ended and the beep tone will sound.
After the “Beep”, say the voice com-
mand.
Re-starting Voice Recognition
While system waits for a command
Shortly press the button on the
steering wheel controls.
The command wait state is immedi-
ately ended and the beep tone will
sound. After the “Beep”, say the
voice command.

263 4
Features of your vehicle
Setup Mode
Press the [SETUP]button to display
the Setup screen.
You can select and control options
related to [Display], [Sound], [Phone]
and [System]
.
With the Display Button
Press the [SETUP]button Select
[Display].
You can select and control options
related to [Brightness], [Mode Pop
up] and [Media Display].
Adjusting the Brightness
Use the [Left/Right] to adjust the
screen brightness or set the Brightness
on Automatic, Day or Night mode.
Press the [Default] to reset.
• Automatic: Adjusts the brightness
automatically.
• Day: Always maintains the bright-
ness on high.
• Night: Always maintains the bright-
ness on low.Mode Pop up
This feature is used to display the
Mode Pop up screen when entering
radio and media modes.
When this feature is turned on,
pressing the [RADIO]or[MEDIA]
button will display the Mode Pop up
screen.
✽NOTICE
The media Mode Pop up screen can
be displayed only when two or more
media modes have been connected.