bulb KIA OPTIMA PLUG-IN HYBRID 2017 User Guide

Position lamp + DRL (LED type)
bulb replacement
5ZQF
"
5ZQF
#
If the position lamp + DRL (1) does not
operate, we recommend you to have it checked at an authorized Kia dealer.
Side repeater lamp bulb
replacement
5ZQF
"
0+'
If the Side repeater lamp does not op‐
erate, we recommend you to have it checked at an authorized Kia dealer.
Rear turn signal lamp bulb
replacement
0+'
1. Open the trunk lid.
2. Open the service cover.

9-77
9
Maintenance

0+'
3. Remove the nuts from the vehicle.
4. Disconnect the rear combinationlamp connector.
0+'
0+'
5. Remove the rear combination lampassembly from the body of the ve‐
hicle. 6. Remove the socket from the as‐
sembly by turning the socket coun‐
terclockwise until the tabs on the
socket align with the slots on the
assembly.
7. Remove the bulb from the socket by pressing it in and rotating itcounterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
8. Insert a new bulb by inserting it in‐ to the socket and rotating it until it
locks into place.
9. Install the socket in the assembly by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
10. Install the rear combination lamp assembly to the body of the vehi‐
cle.
11. Install the service cover by putting it into the service hole.
Maintenance
9-78

Stop and tail lamp (LED type)
bulb replacement
0+'
If the stop and tail lamp (LED) does not
operate, we recommend you to have it checked at an authorized Kia dealer.
Back-up lamp bulb replacement
0+'
1. Open the trunk lid.
2. Loosen the retaining screw of the trunk lid cover and then remove the
cover.
0+'
0+'

9-79
9
Maintenance

0+'
3. Remove the nuts from the vehicle.
4. Disconnect the rear combinationlamp (inside) connector.
5. Remove the rear combination lamp (inside) assembly from the body of
the vehicle.
6. Remove the socket from the as‐ sembly by turning the socket coun‐
terclockwise until the tabs on the
socket align with the slots on the
assembly.
7. Remove the bulb from bulb-socket by pulling it out.
8. Insert a new bulb by inserting it in‐ to the bulb-socket. 9. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
10. Install the rear combination lamp (inside) assembly to the body of
the vehicle.
11. Install the trunk lid cover.
License plate lamp bulb
replacement
0+'
1. Open the trunk lid. 2. Loosen the retaining screw of the
trunk lid cover and then remove the
cover.
0+'
3. Remove the socket from the as‐ sembly by turning the socket coun‐
terclockwise until the tabs on the
socket align with the slots on the
assembly.
4. Remove the bulb from bulb-socket by pulling it out.
5. Insert a new bulb by inserting it in‐ to the bulb-socket.
6. Install the socket in the assembly by aligning the tabs on the socketwith the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
Maintenance
9-80

7. Install the trunk lid cover.
High mounted stop lamp bulb
replacement
0+'
If the high mounted stop lamp (LED)
does not operate, we recommend you to have it checked at an authorized Kia
dealer.
Map lamp bulb replacement
0+'
If the map lamp (bulb and LED type)
does not operate, we recommend you to have it checked at an authorized Kia
dealer.
Vanity mirror lamp bulb
replacement
0+'
WARNING
Prior to working on the Interiorlamps, ensure that the L

3. Install a new bulb in the socket.
4. Install the lamp assembly to interi‐or.
CAUTION
Be careful not to dirty or damagethe lens, lens tab, and plastic hous‐ings.
Room lamp bulb replacement
5ZQF
"
0+'
5ZQF
#
0+'-
WARNING
Prior to working on the Interiorlamps, ensure that the L

Personal lamp bulb replacement
0+'
If the personal lamp (LED) does not op‐
erate, we recommend you to have it checked at an authorized Kia dealer.
Glove box lamp bulb
replacement
0+'
1. Using a flat-blade screwdriver, gen‐ tly pry the lamp assembly from in‐
terior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interi‐ or.
CAUTION
Be careful not to dirty or damagethe lens, lens tab, and plastic hous‐ings.
Trunk lamp bulb replacement
0+'
1. Using a flat-blade screwdriver, gen‐tly pry the lens cover from lamp
housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.

9-83
9
Maintenance

Dimensions............................................................................... 10-02
Engine....................................................................................... 10-03
Gross vehicle weight...............................................................10-04
Luggage volume...................................................................... 10-05
Air conditioning system......................................................... 10-06
Bulb wattage........................................................................... 10-07
Tires and wheels..................................................................... 10-09
Recommended lubricants and capacities........................... 10-11Recommended SAE viscosity number............................. 10-12
Vehicle identification number (VIN)..................................... 10-13
Vehicle certification label....................................................... 10-14
Tire specification and pressure label................................... 10-15
Engine number........................................................................ 10-16
Air conditioner compressor label..........................................10-17
Refrigerant label..................................................................... 10-18
Declaration of conformity..................................................... 10-19
Specifications & Consumer information

10

BULB WATTAGE
Light BulbWattage (W)Bulb type
Front Headlamps (Low)
55W H7SL
Headlamps (Low) – LED type 25W LED
Headlamps (High) 55W/65W 9005HL+/H9
Headlamps (High) – LED type 17W LED
Front turn signal lamps 21W PY21WL/L
Front position lamps 0.7W LED
Daytime running light LED type 6.5W LED
Side repeater lamps LED type 0.5W LED
Rear Rear Stop/Tail lamps (outside)
LED type12W LED
Rear tail lamps (inside) 6W LED
Rear turn signal lamps 21W PY21W
Back-up lamps 16W W16W
High mounted stop lamp* 3W LED
License plate lamps 5W W5W

10-07
10
Specifications & Consumer information

Light BulbWattage (W)Bulb type
Interior Map lamps
Bulb type 10W FESTOON BULB
LED type 1W LED
Room lamps 10W FESTOON BULB
Personal lamps 1W LED
Vanity mirror lamps 5W FESTOON BULB
Glove box lamp 5W FESTOON BULB
Trunk lamp 5W FESTOON BULB

Specifications & Consumer information
10-08