lights KIA OPTIMA PLUG-IN HYBRID 2017 User Guide

MIRRORS
Inside rearview mirror
Adjust the rearview mirror so that thecenter view through the rear window is
seen. Make this adjustment before you
start driving.
WARNING
nRear visibility
Do not place objects in the rear seator cargo area which would interferewith your vision through the rearwindow.
WARNING
Do not adjust the rearview mirrorwhile the vehicle is moving. Thiscould result in loss of control, and anaccident which could cause death,serious injury or property damage.
WARNING
Do not modify the inside mirror anddon’t install a wide mirror. It couldresult in injury, during an accident ordeployment of the air bag.
Electrochromic mirror (ECM)
The electric rearview mirror automati‐
cally controls the glare from the head‐ lights of the vehicles behind you in
nighttime or low light driving condi‐
tions. The sensor mounted in the mir‐ ror senses the light level around the ve‐
hicle, and automatically controls the
headlight glare from the vehicles be‐ hind you.
When the engine is running, the glare is
automatically controlled by the sensor
mounted in the rearview mirror.
Whenever the shift lever is shifted into reverse (R), the mirror will automatical‐
ly go to the brightest setting in order
to improve the driver's view behind the vehicle.
CAUTION
When cleaning the mirror, use a pa‐per towel or similar material damp‐ened with glass cleaner. Do notspray glass cleaner directly on themirror. It may cause the liquid clean‐er to enter the mirror housing.
0+'-
To operate the electric rearview mirror:
• The mirror defaults to the ON posi‐ tion whenever the engine start/stop
button is in the ON position.
Features of your vehicle
5-44

INSTRUMENT CLUSTER
¥
5ZQF
"
GPS
)ZCSJE
¥
5ZQF
#
GPS
)ZCSJE
0+')-#0+')-#1. Hybrid system gauge
2. Fuel gauge
3. Speedometer
4. Warning and indicator lights
5. LCD display (including Trip comput‐er)
6. Battery SOC (State of Charge) gauge
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to the
L

5ZQF
"
GPS
1MVH
JO
)ZCSJE
5ZQF
#
GPS
1MVH
JO
)ZCSJE
1. Hybrid system gauge
2. Fuel gauge
3. Speedometer
4. Warning and indicator lights
5. LCD display (including Trip comput‐er)
6. Battery SOC (State of Charge) gauge
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to the
L

WARNING AND INDICATOR LIGHTS
Warning lights
NOTICE
nWarning lights
Make sure that all warning lights are
OFF after starting the engine. If any
light is still ON, this indicates a situa‐
tion that needs attention.
Hybrid system warning
light
This warning light illumi‐nates:
When there is a malfunction with the
hybrid system.
In this case, we recommend that you
have the vehicle inspected by an au‐ thorized Kia dealer.
Air bag warning light
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.- It illuminates for approximately 6
seconds and then goes off.
• When there is a malfunction with theSRS.
In this case, we recommend that you
have the vehicle inspected by an au‐ thorized Kia dealer.
Seat belt warning light
This warning light informsthe driver that the seat belt
is not fastened.
For more details, refer to the L

If the brakes fail while you are driving,
shift to a lower gear for additional en‐ gine braking and stop the vehicle as
soon as it is safe to do so.
WARNING
nParking Brake & Brake FluidWarning Light
Driving the vehicle with a warninglight ON is dangerous. If the ParkingBrake & Brake Fluid Warning Light il‐luminates with the parking brake re‐leased, it indicates that the brakefluid level is low.In this case, we recommend that youhave the vehicle inspected by an au‐thorized Kia dealer.
Regenerative brake
warning light
This warning light illumi‐nates:
When the regenerative
brake does not operate and the brake does not performwell. This causes the Brake
Warning light (red) and Regenerative Brake Warning Light (yellow) to illumi‐
nate simultaneously.
SFE
DPMPS

ZFMMPX
DPMPS

In this case, drive safely and we recom‐
mend that you have your vehicle in‐ spected by an authorized Kia dealer.
The operation of the brake pedal may
be more difficult than normal and the
braking distance can increase.
Anti-lock brake system
(ABS) warning light
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.- It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with the ABS (The normal braking system will
still be operational without the assis‐
tance of the anti-lock brake system).
In this case, we recommend that you have the vehicle inspected by an au‐
thorized Kia dealer.
Electronic brake force
distribution (EBD)
system warning light
These two warning lights il‐luminate at the same timewhile driving:
• When the ABS and regular brake system may not
work normally.
In this case, we recommend that you have the vehicle inspected by an au‐
thorized Kia dealer.
NOTICE
nElectronic Brake force Distri‐
bution (EBD) System Warning
Light
When the ABS Warning Light is on or
both ABS and Parking Brake & Brake
Fluid Warning Lights are on, the
speedometer, odometer, or tripme‐
ter may not work. Also, the EPS
Warning Light may illuminate and
the steering effort may increase or
decrease.
(Continued)
Features of your vehicle
5-80

(Continued)
In this case, we recommend you
have the vehicle inspected by an au‐
thorized Kia dealer as soon as possi‐
ble.
WARNING
nElectronic Brake force Distri‐bution (EBD) System WarningLight
When both ABS and Parking Brake &Brake Fluid Warning Lights are on,the brake system will not work nor‐mally and you may experience anunexpected and dangerous situationduring sudden braking.In this case, avoid high speed drivingand abrupt braking.We recommend you have the vehicleinspected by an authorized Kia deal‐er as soon as possible.
Electronic power steering
(EPS) warning light (if
equipped)
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.- It remains on until the engine is started.
• When there is a malfunction with the EPS.
In this case, we recommend that you
have the vehicle inspected by an au‐
thorized Kia dealer.
Malfunction indicator
lamp (MIL)
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.- It remains on until the engine is started.
• When there is a malfunction with the emission control system.
In this case, we recommend that you
have the vehicle inspected by an au‐
thorized Kia dealer.
CAUTION
nMalfunction Indicator Lamp(MIL)
Driving with the Malfunction Indica‐tor Lamp (MIL) on may cause dam‐age to the emission control systemswhich could effect drivability and/orfuel economy.
CAUTION
nGasoline Engine
If the Malfunction Indicator Lamp(MIL) illuminates, potential catalyticconverter damage is possible whichcould result in loss of engine power.In this case, we recommend that youhave the vehicle inspected by an au‐thorized Kia dealer as soon as possi‐ble.
Charging system warning
light
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.

5-81
5
Features of your vehicle

- The overspeed warning chime alsosound for approximately 5 sec‐
onds.
Autonomous emergency
braking (AEB) warning
light (if equipped)
This indicator light illumi‐nates:
• When there is a malfunction with the AEB.
In this case, we recommend that you
have the vehicle inspected by an au‐ thorized Kia dealer.
Master warning light
This indicator light illumi‐nates:
• When there is a malfunc‐ tion on the pre-safe seat belt, elec‐
tronic control suspension, or ad‐ vanced smart cruise control or other
systems etc. To identify the details
of the warning, look at the LCD dis‐
play.
Electronic parking brake
(EPB) warning light (if
equipped)
This warning light illumi‐nates:
• Once you set the Engine Start/Stop Button to the ON position.- It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with the EPB.
In this case, we recommend that you
have the vehicle inspected by an au‐
thorized Kia dealer.
NOTICE
nElectronic Parking Brake (EPB)
Warning Light
The Electronic Parking Brake (EPB)
Warning Light may illuminates when
the Electronic Stability control (ESC)
Indicator Light comes on to indicates
that the ESC is not working properly
(This does not indicate malfunction
of the EPB).
&1#Adaptive front lighting
system (AFLS) warning
light (if equipped)
This warning light blinks:
• When there is a malfunction with the AFLS.
If there is a malfunction with the AFLS:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and restart the engine. If the warning light remains
on, we recommend that you have
the vehicle inspected by an author‐
ized Kia dealer.
AFLS
Indicator lights
Charging cable
connection indicator
(Plug-in Hybrid)
This indicator illuminates in red when the charging cable is connec‐
ted.
Features of your vehicle
5-84

LIGHTING
Battery saver function
• The purpose of this feature is to pre‐vent the battery from being dis‐
charged. The system automatically
turns off the parking lights when the driver removes the ignition key and
opens the driver-side door.
• With this feature, the parking lights will turn off automatically if the driv‐
er parks on the side of the road at
night.
If necessary, to keep the lights on when the ignition key is removed,
perform the following: 1. Open the driver-side door.
2. Turn the parking lights OFF and ON again using the light switch on the
steering column.
CAUTION
If the driver gets out of the vehiclethrough other doors (except driver'sdoor), the battery saver functiondoes not operate. Therefore, It cau‐ses the battery to be discharged. Inthis case, make sure to turn off thelamp before getting out of the vehi‐cle.
Headlight escort function (if
equipped)
If you turn the ignition switch to the
ACC or OFF position with the headlights ON, the headlights remain on for about
5 minutes. However, if the driver's door
is opened and closed, the headlights are turned off after 15 seconds.
The headlights can be turned off by
pressing the lock button on the trans‐
mitter (or smart key) twice or turning the light switch to the OFF position.
Daytime running light (if
equipped)
The Daytime Running Lights (DRL) can
make it easier for others to see the front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially helpful after dawn and before sunset.
The DRL system will turn the dedicated
lamp OFF when: 1. The headlight or fog lamp switch is ON.
2. The engine is OFF.
❈
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direc‐ tion, this asymmetric part will daz‐
zle oncoming car driver. To prevent
dazzle, ECE regulation demand sev‐
eral technical solutions (ex. auto‐ matic change system, adhesive
sheet, down aiming). This head‐
lamps are designed to adjust in
user setting mode in cluster.
Lighting control
The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions: 1. OFF position
2. Auto light / AFLS position
Features of your vehicle
5-114

3. Parking light position
4. Headlight position
Parking light position ()
When the light switch is in the parking
light position (3rd position), the tail, li‐ cense and instrument panel lights will
turn ON.
Headlight position ()
When the light switch is in the head‐
light position (4th position), the head, tail, license and instrument panel lights
will turn ON.
NOTICE
The ignition switch must be in the
ON position to turn on the head‐
lights.
Auto light/AFLS position (if
equipped)
When the light switch is in the AUTO
light position, the tail lights and head‐ lights will be turned ON or OFF auto‐
matically depending on the amount of
light outside the vehicle.
If your vehicle is equipped with the adaptive front lighting system (AFLS),
it will also operate when the headlamp
is ON.

5-115
5
Features of your vehicle

CAUTION
•Never place anything over the sen‐sor (1) located on the instrumentpanel. This will ensure better au‐to-light system control.
•Don’t clean the sensor using a win‐dow cleaner. The cleaner mayleave a light film which could inter‐fere with sensor operation.
•If your vehicle has window tint orother types of metallic coating onthe front windshield, the Autolight system may not work prop‐erly.
High beam operation
To turn on the high beam headlamp,
push the lever away from you. The lev‐ er will return to its original position.
The high beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis‐ charged, do not leave the lights on for a
prolonged time while the engine is not
running.
WARNING
Do not use high beam when thereare other vehicles. Using high beamcould obstruct the other driver’s vi‐sion.
To flash the headlights, pull the lever
towards you. It will return to the nor‐ mal (low beam) position when released.
The headlight switch does not need to
be on to use this flashing feature.
Features of your vehicle
5-116