ignition KIA OPTIMA PLUG-IN HYBRID 2017 Owner's Manual

CLEAN AIR (IF EQUIPPED)
0+'-
When the ignition switch is in the ON
position, the clean air function turns on automatically.
Also, the clean air function turns off
automatically, when the ignition switch
turns to the OFF position.

5-149
5
Features of your vehicle

INTERIOR FEATURES
Cigarette lighter (if equipped)
0+'
For the cigarette lighter to work, the
ignition switch must be in the ACC posi‐ tion or the ON position.
To use the cigarette lighter, push it all
the way into its socket. When the ele‐
ment has heated, the lighter will pop out to the L

Seat warmer (if equipped)
'SPOU
TFBU
0+'
3FBS
TFBU
0+'
The seat warmer is provided to warm
the front seats during cold weather. With the ignition switch in the ON posi‐
tion, push either of the switches to
warm the driver's seat or the front passenger's seat.
During mild weather or under condi‐
tions where the operation of the seat
warmer is not needed, keep the switches in the "OFF" position. • Each time you press the switch, the temperature setting of the seat will
change as follows: - Front seat
OFF HIGH( ) MIDDLE( ) LOW( )

- Rear seat
• The seat warmer defaults to the OFF
position whenever the ignition switch
is turned on.
NOTICE
With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automati‐
cally depending on the seat temper‐
ature.
CAUTION
•When cleaning the seats, do notuse an organic solvent such aspaint thinner, benzene, alcohol andgasoline. Doing so may damagethe surface of the heater or seats.
•To prevent overheating the seatwarmer, do not place anything onthe seats that insulates againstheat, such as blankets, cushions orseat covers while the seat warmeris in operation.
•Do not place heavy or sharp ob‐jects on seats equipped with seatwarmers. Damage to the seatwarming components could occur.
•Do not change the seat cover. Itmay damage the seat warmer orairventilation system.

5-155
5
Features of your vehicle

WARNING
nSeat warmer burns
Passengers should use extreme cau‐tion when using seat warmers dueto the possibility of excess heatingor burns. The seat warmer maycause burns even at low tempera‐tures, especially if used for long pe‐riods of time. In particular, the drivermust exercise extreme care for thefollowing types of passengers:1.Infants, children, elderly orhandicapped persons, or hospitaloutpatients
2.Persons with sensitive skin orthose that burn easily
3.Fatigued individuals
4.Intoxicated individuals
5.Individuals taking medicationthat can cause drowsiness orsleepiness (sleeping pills, coldtablets, etc.)
Air ventilation seat (if equipped)
0+'
The temperature setting of the seat
changes according to the switch posi‐ tion. • If you want to warm your seat cush‐ ion, press the switch (red color).
• If you want to ventilate your seat cushion, press the switch (blue color).
• Each time you press the button, the airflow will change as follows:
OFF HIGH( ) MIDDLE( ) LOW( )

• The seat warmer (with air ventila‐
tion) defaults to the OFF position
whenever the ignition switch is turned on.
CAUTION
When cleaning the seats, do not usean organic solvent such as paintthinner, benzene, alcohol and gaso‐line. Doing so may damage the sur‐face of the heater or seats.
Features of your vehicle
5-156

If the wireless charging does not work,
gently move your smart phone around the pad until the charging indicator
light turns yellow. Depending on the
smart phone, the charging indicator light may not turn green even after the
charging is complete.
If the wireless charging is not function‐
ing properly, the orange light will blink and flash for ten seconds then turn off.
In such cases, remove the smart phone
from the pad and replace it on the pad again, or double check the charging sta‐
tus.
If you leave the smart phone on the
charging pad when the vehicle ignition is in OFF, the vehicle will alert you
through warning messages and sound
(applicable for vehicles with voice guid‐ ance function) after the L

(Continued)
•The wireless charging will stopwhen using the wireless smart keysearch function to prevent radiowave disruption.
•The wireless charging will stopwhen the smart key is moved outof the vehicle with the ignition inON.
•The wireless charging will stopwhen any of the doors is opened(applicable for vehicles equippedwith smart keys).
•The wireless charging will stopwhen the vehicle is turned OFF.
•The wireless charging will stopwhen the smart phone is not incomplete contact with the wirelesscharging pad.
•Items equipped with magneticcomponents such as credit card,telephone card, bankbook, anytransportation ticket and suchmay become damaged duringwireless charging.
(Continued)
(Continued)
•Place the smart phone on the cen‐ter of the charge pad for best re‐sults. The smart phone may notcharge when placed near the rimof the charging pad. When thesmart phone does get charged, itmay heat up excessively.
•For smart phones without built inwireless charging system, an ap‐propriate accessory has to beequipped.
•Smart phones of some manufac‐turers may display messages onweak current. This is due to theparticular characteristic of thesmart phone and does not imply amalfunction on wireless chargingfunction.
•The indicator light of some manu‐facturers’ smart phones may stillbe yellow after the smart phone isfully charged. This is due to theparticular characteristic of thesmart phone and not a malfunc‐tion of the wireless charging.
(Continued)
(Continued)
•When any smart phone without awireless charging function or ametallic object is placed on thecharging pad, a small noise maysound. This small sound is due tothe vehicle discerning compatibilityof the object placed on the charg‐ing pad. It does not affect your ve‐hicle or the smart phone in anyway.
Clothes hanger (if equipped)
0+'
❈The actual feature may differ from
the illustration.
Features of your vehicle
5-160

WARNING
•Do not stare at the screen whiledriving. Staring at the screen forprolonged periods of time couldlead to traffic accidents.
•Do not disassemble, assemble, ormodify the audio system. Suchacts could result in accidents, fire,or electric shock.
•Using the phone while driving maylead to a lack of attention of traf‐fic conditions and increase thelikelihood of accidents. Use thephone feature after parking thevehicle.
•Heed caution not to spill water orintroduce foreign objects into thedevice. Such acts could lead tosmoke, fire, or product malfunc‐tion.
•Please refrain from use if thescreen is blank or no sound can beheard as these signs may indicateproduct malfunction. Continueduse in such conditions could lead toaccidents (fires, electric shock) orproduct malfunctions.
(Continued)
(Continued)
•Do not touch the antenna duringthunder or lightening as such actsmay lead to lightning induced elec‐tric shock.
•Do not stop or park in parking-re‐stricted areas to operate the prod‐uct. Such acts could lead to trafficaccidents.
•Use the system with the vehicleignition turned on. Prolonged usewith the ignition turned off couldresult in battery discharge.
WARNING
Driving while distracted can result ina loss of vehicle control that maylead to an accident, severe personalinjury, and death. The driver’s pri‐mary responsibility is in the safe andlegal operation of a vehicle, and useof any handheld devices, otherequipment, or vehicle systems whichtake the driver’s eyes, attention andfocus away from the safe operationof a vehicle or which are not permis‐
(Continued)
(Continued)
sible by law should never be usedduring operation of the vehicle.
CAUTION
•Operating the device while drivingcould lead to accidents due to alack of attention to external sur‐roundings. First park the vehiclebefore operating the device.
•Adjust the volume to levels that al‐low the driver to hear sounds fromoutside of the vehicle. Driving in astate where external sounds can‐not be heard may lead to acci‐dents.
•Pay attention to the volume set‐ting when turning the device on. Asudden output of extreme volumeupon turning the device on couldlead to hearing impairment. (Ad‐just the volume to a suitable levelsbefore turning off the device.)
(Continued)
Audio system
6-14

(Continued)
•If you want to change the positionof device installation, please in‐quire with your place of purchaseor service maintenance center.Technical expertise is required toinstall or disassemble the device.
•Turn on the car ignition before us‐ing this device. Do not operate theaudio system for long periods oftime with the ignition turned offas such operations may lead tobattery discharge.
•Do not subject the device to severeshock or impact. Direct pressureonto the front side of the monitormay cause damage to the LCD ortouch screen.
•When cleaning the device, makesure to turn off the device and usea dry and smooth cloth. Never usetough materials, chemical cloths,or solvents (alcohol, benzene, thin‐ners, etc.) as such materials maydamage the device panel or causecolor/quality deterioration.
(Continued)
(Continued)
•Do not place beverages close tothe audio system. Spilling beverag‐es may lead to system malfunc‐tion.
•In case of product malfunction,please contact your place of pur‐chase or After Service center.
•Placing the audio system within anelectromagnetic environment mayresult in noise interference.
NOTICE
nUsing the UêB device
•To use an external UêB device,
make sure the device is not con‐
nected when starting up the vehi‐
cle. Connect the device after start‐
ing up.
•If you start the engine when the
UêB device is connected, it may
damage the UêB device. (UêB
flashdrives are very sensitive to
electric shock.)
(Continued)
(Continued)
•If the engine is started up or
turned off while the external UêB
device is connected, the external
UêB device may not work.
•The êystem may not play inau‐
thentic Mç3 or WMA files.
1.It can only play Mç3 files with
the compression rate between
8Kbps ~ 320Kbps.
2.It can only play WMA music files
with the compression rate be‐
tween 8Kbps ~ 320Kbps.
•Take precautions for static elec‐
tricity when connecting or discon‐
necting the external UêB device.
•An encrypted Mç3 çLAYEé is not
recognizable.
•Depending on the condition of the
external UêB device, the connec‐
ted external UêB device can be un‐
recognizable.
(Continued)

6-15
6
Audio system

(Continued)
bile phones. Follow these steps to
try again.
1.Turn the Bluetooth® Wireless
Technology function within the
mobile phone off/on and try
again.
2.Turn the mobile phone power
Off/On and try again.
3.Completely remove the mobile
phone battery, reboot, and then
again.
4.éeboot the audio system and
try again.
5.Delete all paired devices, pair
and try again.
•It is possible to pair up to five
Bluetooth® Wireless Technology
devices to the car system.
•çhone contact names should be
saved in English or they may not
be displayed correctly.
•The Handsfree call volume and
quality may differ depending on
the mobile phone.
(Continued)
(Continued)
•Only one Bluetooth® Wireless
Technology device can be connec‐
ted at a time.
•In some mobile phones, starting
the ignition while talking through
Bluetooth® Wireless Technology
enabled handsfree call will result in
the call becoming disconnected.
(êwitch the call back to your mo‐
bile phone when starting the igni‐
tion.)
•If the mobile phone is not paired or
connected, it is not possible to en‐
ter çhone mode. Once a phone is
paired or connected, the guidance
screen will be displayed.
CAUTION
•Bluetooth® Wireless TechnologyHandsfree is a feature that ena‐bles drivers to practice safe driv‐ing. Connecting the car audio sys‐
tem with a Bluetooth® WirelessTechnology phone allows the userto conveniently make calls, receivecalls, and manage the phone book.
Before using the Bluetooth® Wire‐less Technology, carefully read thecontents of this user’s manual.
•Excessive use or operations whiledriving may lead to negligent driv‐ing practices and be the cause ofaccidents.
•Do not operate the device exces‐sively while driving.
•Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents.
•When driving, view the screen onlyfor short periods of time.

6-21
6
Audio system

- File name : Maximum 64 Englishcharacters
- Folder name : Max 32 English characters
❈ Using the scroll feature allows you
to see the entire name of files with
names that are too long to be dis‐
played at once.
• Compatibility by Disc Type 1. çlaying MIXED CDs : First plays the audio CD, then plays the com‐
pressed file(s).
2. çlaying EXTéA CDs : First plays the audio CD, then plays the com‐
pressed file(s).
3. çlaying multisession CDs : çlays in order of sessions- MIXED CD : CD type in which both Mç3 and audio CD files arerecognized in one disc.
- Multisession CD CD type that in‐ cludes more than two sessions.
Different from Extra CDs, multi‐ session CDs are recorded bysessions and have no media lim‐
itation.
• çrecautions upon Writing CDs 1. In all cases except when creating
multisession discs, check the close
session option before creating the disc. Though product malfunctions
will not occur, some time may be
required for the device to check
whether the session state is
closed (approximately 25 seconds).
(Additional time may also be re‐
quired depending on the numberof folders or files.)
2. Changing the Mç3/WMA file exten‐ sions or changing files of other ex‐
tensions to Mç3/WMA may result
in product malfunction.
3. When naming files with Mç3/WMA file extensions, write using only
Korean and English. (Languages
other than Korean and English are
not supported and are displayed asblank.)
4. Unauthorized use or duplication of music files are prohibited by law.
5. çrolonged use of CD-é/CD-éW discs that do not satisfy relatedstandards and/or specifications
could result in product malfunc‐
tion.NOTICE
nUsing the UêB Device
•Connect the UêB device after
turning on the engine. The UêB
device may become damaged if it
is already connected when the ig‐
nition is turned on. The UêB device
may not operate properly if the
car ignition is turned on or off with
the UêB device connected.
•Heed caution to static electricity
when connecting/disconnecting
UêB devices.
•Encoded Mç3 çlayers will not be
recognized when connected as an
external device.
•When connecting an external UêB
device, the device may not proper‐
ly recognize the UêB is in some
states.
•Only products formatted with
byte/sectors under 64Kbyte will
be recognized.
(Continued)
Audio system
6-58