change time KIA OPTIMA PLUG-IN HYBRID 2017 Owner's Guide

êDVC (êpeed Dependent Volume Con‐trol)
The volume level is controlled automat‐ ically according to the vehicle speed.
êDVC can be set by selecting from On/
Off.
Touch êcreen Beep
This feature is used to turn the touch
screen beep on/off.
With the Clock/Calendar Button
çress the SETUP button êelect [Clock/
Calendar]
You can select and control options rela‐
ted to [Clock êettings], [Calendar êet‐ tings] and [Time Format].
Clock êettings
Use the [Up/Down] buttons to set the
Hour, Minutes and AM/çM setting.
çress and hold the
button
(over 0.8 seconds) to display the Clock/ Calendar screen.
Calendar êettings
Use the [Up/Down] buttons to set the
Day, Month and Year setting.
Time Format
This feature is used to change the clock
format between 12hr or 24hr.
With the Phone Button
çress the SETUP button êelect
[çhone]
You can select and control options rela‐ ted to [çair çhone], [çaired çhone List],
[Contacts Download], [Outgoing Vol‐
ume] and [Bluetooth êystem Off].

6-117
6
Audio system

WARNING
nENGINE EXHAUST CAN BE DANGEROUS!
Engine exhaust fumes can be extremely dangerous. If, at any time, you smell exhaust fumes inside the vehicle, open thewindows immediately.•Do not inhale exhaust fumes.Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyx‐iation.
•Be sure the exhaust system does not leak.The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose.If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of thevehicle, we recommend that the system be checked by an authorized Kia dealer.
•Do not run the engine in an enclosed area.Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Never run the engine inyour garage any longer than it takes to start the engine and back the vehicle out.
•Avoid idling the engine for prolonged periods with people inside the vehicle.If it is necessary to idle the engine for a prolonged period with people inside the vehicle, be sure to do so only in an openarea with the air intake set at "Fresh" and fan operating at one of the higher speeds so fresh air is drawn into the interi‐or.
If you must drive with the tailgate/trunk open because you are carrying objects that make this necessary:1.Close all windows.
2.Open side vents.
3.Set the air intake control at "Fresh", the air flow control at "Floor" or "Face" and the fan at one of the higher speeds.
To assure proper operation of the ventilation system, be sure the ventilation air intakes located just in front of the wind‐shield are kept clear of snow, ice, leaves or other obstructions.


7-03
7
Driving your vehicle

(Continued)
more than 2 seconds or 3 times suc‐cessively within 3 seconds. If the ve‐hicle is still moving, you can restartthe hybrid system without depress‐ing the brake pedal by pressing theengine start/stop button with theshift lever in the N (Neutral) position.
ACC (Accessory)
Press the engine start/stopbutton while it is in the OFF
position without depressing the brake pedal.
The steering wheel unlocks (if equipped
with anti-theft steering column lock) and electrical accessories are opera‐
tional.
If the engine start/stop button is in the
ACC position for more than 1 hour, the button is turned off automatically to
prevent battery discharge.
"NCFS
ON
Press the engine start/stop
button while it is in the ACC position without depressingthe brake pedal.
3FEEJTI
PSBOHF
The warning lights can be checked be‐
fore the hybrid system is started. Do not leave the hybrid system start/stop
button in the ON position for a long
time. The battery may discharge, be‐ cause the engine is not running.
START/RUN
To start the hybrid system,depress the brake pedal and
press the engine start/stop button with the shift lever in the P (Park) or the N
(Neutral) position. For your safety, start the hybrid system with the shift
lever in the P (Park) position.
NOTICE
If you press the engine start/stop
button without depressing the brake
pedal for automatic transaxle vehi‐
cles, the hybrid system will not start
and the engine start/stop button
changes as follows:
OFF ACC ON OFF or ACC
/PU
JMMVNJOBUFE
NOTICE
If you leave the engine start/stop
button in the ACC or ON position for
a long time, the battery will dis‐
charge.
WARNING
•Never press the engine start/stopbutton while the vehicle is in mo‐tion. This would result in loss of di‐rectional control and braking func‐tion, which could cause an acci‐dent.
•The anti-theft steering columnlock (if equipped) is not a substi‐tute for the parking brake. Beforeleaving the driver's seat, alwaysmake sure the shift lever is engag‐ed in P (Park), set the parkingbrake fully and shut the engineoff. Unexpected and sudden vehi‐cle movement may occur if theseprecautions are not taken.
(Continued)

7-07
7
Driving your vehicle

(Continued)
-The vehicle is standing on a
steep slope
-The vehicle moved several
times
In these cases, the brake warning
light comes on, the AUTO HOLD in‐
dicator changes from green to
white, and a warning sounds and a
message will appear to inform you
that EPB has been automatically
engaged. Before driving off again,
press foot brake pedal, check the
surrounding area near your vehicle
and release parking brake manual‐
ly with the EPB switch.
•If the AUTO HOLD indicator lights
up yellow, the Auto Hold is not
working properly. We recommend
that you contact an authorized Kia
dealer.
•While operating Auto Hold, you
may hear mechanical noise. How‐
ever, it is normal operation noise.
WARNING
•Press the accelerator pedal slowlywhen you start the vehicle.
•For your safety, cancel the AutoHold when you drive downhill orback up the vehicle or park the ve‐hicle.
CAUTION
If there is a malfunction with thedriver’s door, engine hood open de‐tection system, the Auto Hold maynot work properly.We recommend that you contact anauthorized Kia dealer.
Warning messages
Parking brake automatically locked
5ZQF
"
0+'-
5ZQF
#
0+'-
When the EPB is applied from Auto
Hold, a warning will sound and a mes‐ sage will appear.
Driving your vehicle
7-26

To decrease the cruising speed:
5ZQF
"
0+'
5ZQF
#
0+'-
Follow either of these procedures:• Move the lever down (to SET-) and hold it. Your vehicle will gradually
slow down. Release the lever at the speed you want to maintain. • Move the lever down (to SET-) and
release it immediately. The cruising
speed will decrease by 2 km/h
(1 mph) each time you move the lev‐
er down (to SET-) in this manner.
To temporarily accelerate with
the cruise control on:
If you want to speed up temporarily
when the cruise control is on, depress the accelerator pedal. Increased speed
will not interfere with cruise control op‐
eration or change the set speed.
To return to the set speed, take your foot off the accelerator pedal.
To cancel cruise control, do one
of the following:
5ZQF
"
0+'
5ZQF
#
0+'-
• Depress the brake pedal.
• Depress the clutch pedal if equipped with a manual transaxle.
Driving your vehicle
7-50

Operation
0+'-
• If a traffic sign that is relevant toyour vehicle is passed, the system
displays the information of the speed limits and no passing restrictions to
the driver.
• When the driver turns on the ignition, the system displays stored informa‐
tion of the speed limit before turning
off the ignition. • Sometimes different speed limits are
displayed for the same road. The in‐
formation displayed is depending on
the situation. Because, traffic signs
with additional sign (e.g rainy, ar‐
row...) are also detected and com‐ pared with vehicle interior data (e.g
wiper operation, turn signal...).
• The system can update the speed limit information without visible
speed limit signs in the following sit‐ uations. - When you change your driving di‐ rection with right or left or U turn‐ ing.
- When vehicle changes roads. (e.g. from highway to country road…)
- When you enter or exit into town or village.
NOTICE
If speed limit value has the differ‐
ence between cluster and naviga‐
tion, check the speed unit setting in
navigation.
Display
/P
SFMJBCMF
TQFFE
MJNJU
JOGPSNBUJPO
86.
• If the system doesn’t have a reliablespeed limit information, the following
symbol is displayed in both the in‐ strument cluster and navigation
screen.
/P
QBTTJOH
JOGPSNBUJPO
86.86.
• If the system detects no passing sign,no passing is displayed in both the in‐
strument cluster and navigation
screen.
Driving your vehicle
7-56

To increase cruise control set
speed:
0+'
Follow either of these procedures:• Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 10 km/h (5 mph). Release the lev‐ er at the speed you want.
• Move the lever up (to RES+), and re‐ lease it immediately. The cruising
speed will increase by 1.0 km/h
(1.0 mph) each time you move the
lever up (to RES+) in this manner.
• You can set the speed to 180 km/h (110 mph).
To decrease the cruise control set
speed:
0+'
Follow either of these procedures:• Move the lever down (to SET-), and hold it. Your vehicle set speed will de‐
crease by 10 km/h (5 mph). Release the lever at the speed you want.
• Move the lever down (to SET-), and release it immediately. The cruising
speed will decrease by 1.0 km/h
(1.0 mph) each time you move the
lever down (to SET-) in this manner.
• You can set the speed to 30 km/h (20 mph).
To temporarily accelerate with the
cruise control on:
If you want to speed up temporarilywhen the cruise control is on, depress
the accelerator pedal. Increased speed
will not interfere with cruise control op‐ eration or change the set speed.
To return to the set speed, take your
foot off the accelerator.
If you move the lever down (to SET-) at
increased speed, the cruising speed will be set again.
NOTICE
Be careful when accelerating tempo‐
rarily, because the speed is not con‐
trolled automatically at this time
even if there is a vehicle in front of
you.

7-61
7
Driving your vehicle

Vehicle to vehicle distance
setting
To set vehicle to vehicle distance:
0+'
This function allows you to program
the vehicle to maintain relative distance to the vehicle ahead without depressing
the accelerator pedal or brake pedal.
The vehicle to vehicle distance will au‐
tomatically activate when the advanced smart cruise control system is on.
Select the appropriate distance accord‐
ing to road conditions and vehicle
speed. Each time the button is pressed, the
vehicle to vehicle distance changes as
follows:
%JTUBODF
 %JTUBODF
 %JTUBODF

%JTUBODF


For example, if you drive at 90 km/h
(56 mph), the distance maintain as fol‐ lows: Distance 4 - approximately 52.5 mDistance 3 - approximately 40 mDistance 2 - approximately 32.5 mDistance 1 - approximately 25 m
NOTICE
The 'Distance 4' is always set when
the system is used for the first time
after starting the engine.
The advanced smart cruise control
system remember the last vehicle to
vehicle distance which the driver
used in the vehicle with AEB.
Driving your vehicle
7-64

EXPLANATION OF SCHEDULED MAINTENANCE ITEMS
Engine oil and filter
The engine oil and filter should be
changed at the intervals specified in the maintenance schedule. If the vehi‐
cle is being driven in severe conditions,
more frequent oil and filter changes are required.
HSG (hybrid starter &
generator) belt
The HSG belt should be changed at the
intervals specified in the maintenance schedule.
Fuel filter (for gasoline)
Kia gasoline vehicle is equipped a life‐
time fuel filter that integrated with the fuel tank. Regular maintenance or re‐
placement is not needed but depends
on fuel quality. If there are some im‐ portant safety matters like fuel flow
restriction, surging, loss of power, hard
starting problem etc, fuel filter inspec‐ tion or replace is needed.
We recommend that the fuel filter be
Inspected or replaced by an authorized
Kia dealer.
Fuel lines, fuel hoses and
connections
Check the fuel lines, fuel hoses and
connections for leakage and damage. We recommend that the fuel lines, fuel
hoses and connections be replaced by
an authorized Kia dealer.
Vapor hose (for gasoline engine)
and fuel filler cap
The vapor hose and fuel filler cap
should be inspected at those intervals
specified in the maintenance schedule.
Make sure that a new vapor hose or
fuel filler cap is correctly replaced.
Vacuum crankcase ventilation
hoses (if equipped)
Inspect the surface of hoses for evi‐
dence of heat and/or mechanical dam‐ age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Particu‐ lar attention should be paid to examine
those hose surfaces nearest to high
heat sources, such as the exhaust manifold. Inspect the hose routing to assure that
the hoses do not come in contact with
any heat source, sharp edges or mov‐ ing component which might cause heat
damage or mechanical wear. Inspect all
hose connections, such as clamps and couplings, to make sure they are se‐
cure, and that no leaks are present. Ho‐
ses should be replaced immediately if there is any evidence of deterioration
or damage.
Air cleaner filter
We recommend that the air cleaner fil‐
ter be replaced by an authorized Kia dealer.
Spark plugs (for gasoline engine)
Make sure to install new spark plugs of
the correct heat range.
WARNING
Do not disconnect and inspect sparkplugs when the engine is hot. Youmay burn yourself.

9-21
9
Maintenance