key KIA OPTIMA PLUG-IN HYBRID 2017 Owner's Guide

WELCOME SYSTEM (IF EQUIPPED)
Welcome light (if equipped)
When all the doors (and trunk) are
locked and closed, the room lamp will come on for about 15 seconds if any of
the below is performed. • With the smart key system - When the vehicle is approachedwith the smart key in possession.
Escort welcome (if equipped)
When the headlight (light switch in the
headlight or AUTO position) is on and all doors (and trunk) are locked and closed,
the position light and headlight will
come on for 15 seconds if any of the below is performed. • With the smart key system
- When the door unlock button ispressed on the smart key.
At this time, if you press the door lock
or unlock button, the position light and
headlight will turn off immediately.
Interior light
When the interior light switch is in the
DOOR position and all doors (and trunk) are locked and closed, the room lamp
will come on for 30 seconds if any of
the below is performed. • With the smart key system - When the door unlock button ispressed on the smart key.
- When the button of the outside door handle is pressed.
At this time, if you press the door lock or unlock button, the room lamp will
turn off immediately.
Features of your vehicle
5-130

STORAGE COMPARTMENT
These compartments can be used to store small items.
CAUTION
•To avoid possible theft, do notleave valuables in the storagecompartment.
•Always keep the storage compart‐ment covers closed while driving.Do not attempt to place so manyitems in the storage compartmentthat the storage compartmentcover cannot close securely.
WARNING
nFlammable materials
Do not store cigarette lighters, pro‐pane cylinders, or other flammable/explosive materials in the vehicle.These items may catch fire and/orexplode if the vehicle is exposed tohot temperatures for extended peri‐ods.
Center console storage
To open the center console storage, pull
up the lever.
Glove box
0+'-
The glove box can be locked and un‐
locked with a master key. (if equipped)
To open the glove box, pull the lever (1) and the glove box will automatically
open. Close the glove box after use.
WARNING
To reduce the risk of injury in an ac‐cident or sudden stop, always keepthe glove box door closed while driv‐ing.
Features of your vehicle
5-150

USB charger (if equipped)
0+'-
The USB charger is designed to re‐
charge batteries of small size electrical devices using a USB cable. The electrical
devices can be recharged when the En‐
gine Start/Stop button is in ACC/ON/ START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the USB
port after use. • Some devices are not supported for
fast charging but will be charged withnormal speed.
• Use the USB charger when the engine is running to prevent battery dis‐
charge. • Only devices that fits the USB port
can be used.
• The USB charger can be used only for battery charging purposes.
• Battery chargers cannot be charged.
Wireless smart phone charging
system (if equipped)
A wireless smart phone charging sys‐
tem located in front of the center con‐ sole.
Firmly close all doors, and turn the igni‐
tion to ACC or IGN ON. To start wireless
charging, place the smart phone equip‐ ped with wireless charging function on
the wireless charging pad. For best wireless charging results, place
the smart phone on the center of the charging pad.
The wireless charging system is de‐
signed for one smart phone equipped
with QI per single usage only. Please re‐ fer to the smart phone accessory cover
or the smart phone manufacturer
homepage to check whether your smart phone supports QI function.
Wireless smart phone charging
1. Remove any object on the smart phone charging pad including the
smart key. If there is any foreign
object on the pad other than a
smart phone, the wireless charging
function may not operate properly.
2. Place the smart phone on the cen‐ ter of the wireless charging pad.
3. The indicator light will change to orange once the wireless chargingbegins. After the charging is com‐
plete, the orange light will change
to green.
4. You can choose to turn the wireless charging function to either ON or
OFF by selecting the USM on the in‐
strument cluster. (Please refer to
L

(Continued)
•The wireless charging will stopwhen using the wireless smart keysearch function to prevent radiowave disruption.
•The wireless charging will stopwhen the smart key is moved outof the vehicle with the ignition inON.
•The wireless charging will stopwhen any of the doors is opened(applicable for vehicles equippedwith smart keys).
•The wireless charging will stopwhen the vehicle is turned OFF.
•The wireless charging will stopwhen the smart phone is not incomplete contact with the wirelesscharging pad.
•Items equipped with magneticcomponents such as credit card,telephone card, bankbook, anytransportation ticket and suchmay become damaged duringwireless charging.
(Continued)
(Continued)
•Place the smart phone on the cen‐ter of the charge pad for best re‐sults. The smart phone may notcharge when placed near the rimof the charging pad. When thesmart phone does get charged, itmay heat up excessively.
•For smart phones without built inwireless charging system, an ap‐propriate accessory has to beequipped.
•Smart phones of some manufac‐turers may display messages onweak current. This is due to theparticular characteristic of thesmart phone and does not imply amalfunction on wireless chargingfunction.
•The indicator light of some manu‐facturers’ smart phones may stillbe yellow after the smart phone isfully charged. This is due to theparticular characteristic of thesmart phone and not a malfunc‐tion of the wireless charging.
(Continued)
(Continued)
•When any smart phone without awireless charging function or ametallic object is placed on thecharging pad, a small noise maysound. This small sound is due tothe vehicle discerning compatibilityof the object placed on the charg‐ing pad. It does not affect your ve‐hicle or the smart phone in anyway.
Clothes hanger (if equipped)
0+'
❈The actual feature may differ from
the illustration.
Features of your vehicle
5-160

(Continued)
•êome non-standard UêB devices
(METAL COVEé TYçE UêB) can be
unrecognizable.
•êome UêB flash memory readers
(such as CF, êD, micro êD, etc.) or
external-HDD type devices can be
unrecognizable.
•Music files protected by DéM (DIG‐
ITAL éIGHTê MANAGEMENT) are
not recognizable.
•The data in the UêB memory may
be lost while using this audio. Al‐
ways back up important data on a
personal storage device.
•

çlease avoid using UêB
memory products
which can be used as
key chains or cellular
phone accessories as
they could cause dam‐
age to the UêB jack.
çlease make certain only to use
plug type connector products.
NOTICE
nUsing the içod® device
•êome içod® models may not sup‐
port communication protocol and
files may not properly play.
êupported içod® models:
-içhone® 3Gê/4
-içod touch® 1st~4th generation
-içod nano® 1st~6th generation
-içod classic®
•The order of search or playback of
songs in the içod® can be different
from the order searched in the au‐
dio system.
•If the içod® disabled due to its
own malfunction, reset the içod®.
(éeset: éefer to içod® manual)
•An içod® may not operate normal‐
ly on low battery.
(Continued)
(Continued)
•êome içod® devices, such as the
içhone®, can be connected
through the Bluetooth® Wireless
Technology interface. The device
must have audio Bluetooth® Wire‐
less Technology capability (such as
for stereo headphone Bluetooth®
Wireless Technology). The device
can play, but it will not be control‐
led by the audio system.
•To use içod® features within the
audio, use the cable provided upon
purchasing an içod® device.
•êkipping or improper operation
may occur depending on the char‐
acteristics of your içod®/içhone®
device.
(Continued)

6-17
6
Audio system

CAUTION
To pair a Bluetooth® Wireless Tech‐nology enabled mobile phone, au‐thentication and connection process‐es are first required. As a result, youcannot pair your mobile phone whiledriving the vehicle. First park yourvehicle before use.
1. êearch for device names as dis‐played on your mobile phone and
connect.
2. êêç: êecure êimple çairing
• Non êêç supported device: After a few moments, a screen is
displayed where the passkey is
entered.
Enter the passkey L

Clock Display when çower is OFF
êelect [Clock Disp.(çwr Off)]
êet [On/
Off]. • [On]: Displays time/date on screen.
• [Off]: Turn off.
With the Phone Button (if
equipped)
çress the button êelect
[çhone].
çair çhone
êelect [çair çhone].
CAUTION
To pair a Bluetooth® Wireless Tech‐nology enabled mobile phone, au‐thentication and connection process‐es are first required. As a result, youcannot pair your mobile phone whiledriving the vehicle. First park yourvehicle before use.
1. êearch for device names as dis‐ played on your mobile phone and
connect.
2. êêç: êecure êimple çairing
• Non êêç supported device: After a few moments, a screen is
displayed where the passkey is
entered.
Enter the passkey L

Adjust the number currently in focus to
set the [hour] and press the TUNE
knob to set the [minute] and [AM/çM].
Calendar êettings
This menu is used to set the date. êelect [Calendar êettings].
Adjust the number currently in focus to
make the settings and press the
TUNE knob to move to the next setting.
Time Format
This function is used to set the 12/24
hour time format of the audio system.
êelect [Time Format] êet 12hr / 24hr.
Clock Display when çower is OFF
êelect [Clock Disp.(çwr Off)]
êet [On/
Off]. • [On]: Displays time/date on screen.
• [Off]: Turn off.
With the Phone Button (if
equipped)
çress the button êelect
[çhone].
çair çhone
êelect [çair çhone].
CAUTION
To pair a Bluetooth® Wireless Tech‐nology enabled mobile phone, au‐
(Continued)
(Continued)
thentication and connection process‐es are first required. As a result, youcannot pair your mobile phone whiledriving the vehicle. First park yourvehicle before use.
1. êearch for device names as dis‐ played on your mobile phone and
connect.
2. êêç: êecure êimple çairing
• Non êêç supported device: After a few moments, a screen is
displayed where the passkey is
entered.
Enter the passkey L

• êêç supported device:After a few moments, a screen is displayed 6 digits passkey.
Check the passkey on your Blue‐ tooth ®
Wireless Technology de‐
vice and confirm.
The device name and passkey will be displayed on the screen for up
to 3 minutes. If pairing is not com‐
pleted within the 3 minutes, the
mobile phone pairing process will
automatically be canceled.
3. çairing completion is displayed. In some mobile phones, pairing will
automatically be followed by con‐
nection.
It is possible to pair up to five Blue‐ tooth ®
Wireless Technology enabled
mobile phones.çhone List
The names of up to 5 paired phones will be displayed.
A [
] is displayed in front of the cur‐
rently connected phone.
êelect the desired name to setup the
selected phone.
• Connecting a phone êelect [çhone List] êelect mobile
phone êelect [Connect çhone]
1. êelect a mobile phone that is not currently connected.
2. Connect the selected mobile phone.
3. Connection completion is dis‐ played.
If a phone is already connected, dis‐
connect the currently connected phone and select a new phone to
connect.
• Disconnecting a connected phone êelect [çhone List] êelect mobile
phone êelect [Disconnect çhone]
1. êelect the currently connected mobile phone.
2. Disconnect the selected mobile phone.
3. Disconnection completion is dis‐ played.
• Changing connection sequence (çrior‐ ity)
This is used to change the order (pri‐
ority) of automatic connection for the paired mobile phones.
êelect [çhone List]
êelect [çriority] êelect No. 1 çriority mobile phone
1. êelect [çriority].
2. From the paired phones, select the phone desired for No.1 priority.
3. The changed priority sequence is displayed.

6-51
6
Audio system

(Continued)
•The device will not support files
locked by DéM (Digital éights Man‐
agement.)
•UêB memory sticks used by con‐
necting an Adaptor (êD Type or CF
Type) may not be properly recog‐
nized.
•The device may not operate prop‐
erly when using UêB HDDs or UêBs
subject to connection failures
caused by vehicle vibrations. (e.g.
i-stick type)
• Avoid use of UêB mem‐
ory products that can
also be used as key
chains or mobile phone
accessories. Use of
such products may
cause damage to the
UêB jack.
Use of such products may cause
damage to the UêB jack.
(Continued)
(Continued)
•Connecting an Mç3 device or
phone through various channels,
such as AUX/BT or Audio/UêB
mode may result in pop noises or
abnormal operation.
NOTICE
nUsing the içod® device
•içod® is a registered trademark of
Apple Inc.
•In order to use the içod® while op‐
erating the keys, you must use a
dedicated içod® cable. (the cable
that is supplied when purchasing
içod®/içhone® products)
•If the içod® is connected to the
vehicle while it is playing, a high
pitch sound could occur for ap‐
proximately 1-2 seconds immedi‐
ately after connecting. If possible,
connect the içod® to the vehicle
with the içod® stopped/paused.
(Continued)
(Continued)
•During ACC ON state, connecting
the içod® through the içod® cable
will charge the içod® through the
car audio system.
•When connecting with the içod®
cable, make sure to fully insert the
jack to prevent communication in‐
terference.
•When the Eè features of an exter‐
nal device, such as the içod®, and
the audio system are both active,
Eè effects could overlap and cause
sound deterioration and distortion.
Whenever possible, turn off the Eè
feature within the external device
upon use by connecting with the
audio system.
•Noise may occur when an içod® or
AUX device is connected. When
such devices are not being used,
disconnect the device for storage.
(Continued)
Audio system
6-60