key KIA OPTIMA PLUG-IN HYBRID 2017 Service Manual

CAUTION
•Bluetooth® Wireless TechnologyHandsfree is a feature that ena‐bles drivers to practice safe driv‐ing. Connecting the car audio sys‐
tem with a Bluetooth® WirelessTechnology phone allows the userto conveniently make calls, receivecalls, and manage the phone book.
Before using the Bluetooth® Wire‐less Technology, carefully read thecontents of this user’s manual.
•Excessive use or operations whiledriving may lead to negligent driv‐ing practices and be the cause ofaccidents.
•Do not operate the device exces‐sively while driving.
•Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents.
•When driving, view the screen onlyfor short periods of time.
NOTICE
nUsing the Voice éecognition
•When using the voice recognition
feature, only commands listed
within the user's manual are sup‐
ported.
•Be aware that during the opera‐
tion of the voice recognition sys‐
tem, pressing any key other than
the button or touching the
screen will terminate voice recog‐
nition mode.
•For superior voice recognition per‐
formance, position the microphone
used for voice recognition above
the head of the driverL

- When pressed in the phonescreen, displays call history
screen
- When pressed in the dial screen, makes a call
- When pressed in the incoming call screen, answers the call
- When pressed during call wait‐ ing, switches to waiting call (Call
Waiting)
When pressed and held - When pressed in the Bluetooth ®
Wireless Technology Handsfree
wait mode, redials the last call
- When pressed during a Blue‐ tooth ®
Wireless Technology
Handsfree call, switches call backto mobile phone (çrivate)
- When pressed while calling on the mobile phone, switches call back
to Bluetooth ®
Wireless Technolo‐
gy Handsfree (Operates only
when Bluetooth ®
Wireless Tech‐
nology Handsfree is connected)
5. Ends phone call
6. (if equipped) When pressed shortly- êtarts voice recognition - When selecting during a voice
prompt, stops the prompt and
converts to voice commandwaiting state
When pressed and held - Ends voice recognition
Bluetooth® Wireless Technology
(Type B-1)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Device: Name of device as shownwhen searching from your Blue‐ tooth ®
Wireless Technology de‐
vice
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system.
Audio system
6-80

4. êêç: êecure êimple çairing[Non êêç supported device]
After a few moments, a screen is
displayed where the passkey is en‐
tered.
Enter the passkey L

Bluetooth® Wireless Technology
(Type B-2)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Car name: Name of device asshown when searching from your Bluetooth ®
Wireless Technology
device
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system. 4. êêç: êecure êimple çairing
[Non êêç supported device]
After a few moments, a screen is
displayed where the passkey is en‐
tered.
Enter the passkey L

NOTICE
•Up to 1,000 contacts entries can
be copied into car contacts.
•Upon downloading contacts data,
previously saved contacts data will
be deleted.
•Downloading is not possible if the
contacts download feature is
turned off within the Bluetooth®
Wireless Technology device. Also,
some devices may require device
authorization upon attempting to
download. If downloading cannot
be normally conducted, check the
Bluetooth® Wireless Technology
device setting or the screen state.
•Caller ID information will not be
displayed for unsaved callers.
•The download feature may not be
supported in some mobile phones.
Check to see that the Bluetooth®
Wireless Technology device sup‐
ports the download feature.
Bluetooth® Wireless Technology
(Type B-2, For Colombia model)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Car name: Name of device asshown when searching from your Bluetooth ®
Wireless Technology
device
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system.

6-91
6
Audio system

4. êêç: êecure êimple çairing[Non êêç supported device]
After a few moments, a screen is
displayed where the passkey is en‐
tered.
Enter the passkey L

(Continued)
•Never reach for the engine start/stop button or any other controlsthrough the steering wheel whilethe vehicle is in motion. The pres‐ence of your hand or arm in thearea could cause loss of vehiclecontrol, an accident and seriousbodily injury or death.
•Do not place any movable objectsaround the driver's seat as theymay move while driving, interferewith the driver and lead to an acci‐dent.
Starting the hybrid system
WARNING
•Always wear appropriate shoeswhen operating your vehicle. Un‐suitable shoes, such as high heels,ski boots, sandals, flip-flops, etc.,may interfere with your ability touse the brake and accelerator ped‐als.
(Continued)
(Continued)
•Do not start the vehicle with theaccelerator pedal depressed.The vehicle can move and lead toan accident.
NOTICE
•The hybrid system will start by
pressing the Engine Start/Stop
button, only when the smart key
is in the vehicle.
•Even when the smart key is in the
vehicle, and when it is far away
from the driver, the hybrid system
may not start.
(Continued)
(Continued)
•When the Engine Start/Stop but‐
ton is in the ACC or ON position,
any door is open, the system
checks for the smart key. When
the smart key is not in the vehicle,
the "" indicator will blink and
the warning "Key not in vehicle"
will come on. When all doors are
closed, the chime will also sound
for about 5 seconds. Keep the
smart key in the vehicle when in
the ACC position or if the hybrid
system is ON.
1. Always carry the smart key withyou.
2. Make sure the parking brake is ap‐ plied.
3. Make sure the shift lever is in P (Park).
4. Depress the brake pedal.
5. Press the Engine Start/Stop button. If the hybrid system starts, the
"
" indicator will come on.
Driving your vehicle
7-08

NOTICE
•Do not wait for the engine to
warm up while the vehicle remains
stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
•Always start the vehicle with your
foot on the brake pedal. Do not
depress the accelerator while
starting the vehicle. Do not race
the engine while warming it up.
•If ambient temperature is low, the
"" indicator may remain illumi‐
nated longer than the normal
amount of time.
NOTICE
To prevent damage to the vehicle:
(Continued)
(Continued)
•If the "" indicator turns off
while you are in motion, do not at‐
tempt to move the shift lever to
the P (Park) position.
If traffic and road conditions per‐
mit, you may put the shift lever in
the N (Neutral) position while the
vehicle is still moving and press
the Engine Start/Stop button in an
attempt to restart the hybrid sys‐
tem.
•Do not push or tow your vehicle to
start the hybrid system.
NOTICE
•If the battery is weak or the smart
key does not work correctly, you
can start the hybrid system by
pressing the engine start/stop
button with the smart key.
The side with the lock button
should be contacted directly.
When you press the engine start/
stop button directly with the
smart key, the smart key should
contact the button at a right an‐
gle.
•When the stop lamp fuse is blown,
you cannot start the hybrid sys‐
tem normally.
Replace the fuse with a new one.
If it is not possible, you can start
the hybrid system by pressing the
engine start/stop button for 10
seconds while it is in the ACC posi‐
tion. The engine can start without
depressing the brake pedal. But
for your safety always depress
the brake pedal before starting
the engine.

7-09
7
Driving your vehicle

(Continued)
•Never allow anyone who is unfa‐miliar with the vehicle to touch theparking brake. If the parking brakeis released unintentionally, seriousinjury may occur.
•All vehicles should always have theparking brake fully engaged whenparking to avoid inadvertentmovement of the car which can in‐jure occupants or pedestrians.
CAUTION
•A click sound may be heard whileoperating or releasing the EPB, butthese conditions are normal andindicate that the EPB is function‐ing properly.
•When leaving your keys with aparking lot attendant or valet,make sure to inform him/her howto operate the EPB.
•The EPB may malfunction if youdrive with the EPB applied.
•When you automatically releaseEPB by depressing the acceleratorpedal, depress it slowly.
System warning
0+'-
5ZQF
"
5ZQF
#
0+'-
When the conversion from Auto Hold to
EPB is not working properly a warning will sound and a message will appear.
CAUTION
Depress the brake pedal when theabove message appears for the AutoHold and EPB may not activate.
Driving your vehicle
7-22

If it fits loosely, we recommend that
you consult an authorized Kia dealer.
If you do not have a spare, use a fuse of the same rating from a circuit you
may not need for operating the vehicle,
such as the cigarette lighter fuse.
If the headlights or taillights, stop lights, courtesy lamp, day time running
lights (D.R.L) do not work and the fuses
are OK, check the fuse panel in the en‐ gine compartment. If a fuse is blown, it
must be replaced.
Fuse switch
0+'
Always, put the fuse switch at the ON
position. If you move the switch to the OFF posi‐
tion, some items such as audio and dig‐
ital clock must be reset and transmitter
(or smart key) may not work properly.
If the fuse switch is in OFF, a warning sign will illuminate on the dashboard.
CAUTION
•Put all switches in ON when driv‐ing.
•If the vehicle remains idle for over1 month, put all switches in OFF toprevent the batteries from beingdischarged.
•Excluding long-term parking forover 1 month, the contact pointsof switches may wear out uponextensive use. Please refrain fromexcessive use of switches.
Engine compartment fuse
replacement
1. Turn the ignition switch and all oth‐ er switches off.
2. Remove the fuse panel cover by pressing the tab and pulling the
cover up. When the blade type fuse
is disconnected, remove it by using
the clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
3. Check the removed fuse; replace it if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
Maintenance
9-54