warning KIA OPTIMA PLUG-IN HYBRID 2017 Manual Online

Automatic reversal
0:'
If an object or part of the body is de‐
tected while the sunroof glass or sun‐ shade is closing automatically, it will re‐
verse the direction, and then stop.
The auto reverse function does not
work if a tiny obstacle is between the sliding glass or sunshade and the sun‐
roof sash. You should always check
that all passengers and objects are away from the sunroof before closing
it.
WARNING
nSunroof
(Continued)
(Continued)
•Be careful that no head, hands andbody parts are obstructed by aclosing sunroof.
•Do not extend the face, neck,arms or body outside the sunroofwhile driving.
•Make sure your hands and headare safely out of the way beforeclosing a sunroof.
•A panorama sunroof is made ofglass, therefore it may break in anaccident. If you do not have yourseat belt on, you may stick out ofthe broken glass and get injured orkilled. For all passengers' safety,have an appropriate protection on(ex. seat belt, CRS, etc.).
CAUTION
•Periodically remove any dirt thatmay accumulate on the guide rail.
•If you drive with the sunroofopened right after a car wash orrain, water may get inside the ve‐hicle.
CAUTION
nSunroof motor damage
If you try to open the sunroof whenthe temperature is below freezing orwhen the sunroof is covered withsnow or ice, the glass or the motorcould be damaged.
Resetting the sunroof
Whenever the vehicle battery is discon‐
nected or discharged, you must reset your sunroof system as follows:
1. Start the engine.
2. Close the sunshade and sunroof completely if opened.
3. Release the sunroof control lever.
4. Push the sunroof control lever for‐ ward in the direction of close
(about 10 seconds) until the sun‐
shade slightly moves. Then, release
the lever.
Features of your vehicle
5-38

(Continued)
•When you operate the steering
wheel in a low temperature, ab‐
normal noise could occur. If the
temperature rises, the noise will
disappear. This is a normal condi‐
tion.
Tilt & telescopic steering
A tilt and telescopic steering wheel al‐
lows you to adjust the steering wheel before you drive. You can also raise it
to give your legs more room when you
exit and enter the vehicle.
The steering wheel should be posi‐ tioned so that it is comfortable for you
to drive, while permitting you to see
the instrument panel warning lights and gauges.
WARNING
•Never adjust the angle of thesteering wheel while driving. Youmay lose steering control andcause severe personal injury,death or accidents.
(Continued)
(Continued)
•After adjusting, push the steeringwheel both up and down to be cer‐tain it is locked in position.
0+'
To change the steering wheel angle,
pull down the lock release lever (1), ad‐ just the steering wheel to the desired
angle (2) and height (3), then pull up
the lock-release lever (4) to lock the steering wheel in place. Be sure to ad‐
just the steering wheel to the desired
position before driving.
NOTICE
After adjustment, sometimes the
lock-release lever may not lock the
steering wheel.
It is not a malfunction. This occurs
when two gears engage. In this case,
adjust the steering wheel again and
then lock the steering wheel.

5-41
5
Features of your vehicle

MIRRORS
Inside rearview mirror
Adjust the rearview mirror so that thecenter view through the rear window is
seen. Make this adjustment before you
start driving.
WARNING
nRear visibility
Do not place objects in the rear seator cargo area which would interferewith your vision through the rearwindow.
WARNING
Do not adjust the rearview mirrorwhile the vehicle is moving. Thiscould result in loss of control, and anaccident which could cause death,serious injury or property damage.
WARNING
Do not modify the inside mirror anddon’t install a wide mirror. It couldresult in injury, during an accident ordeployment of the air bag.
Electrochromic mirror (ECM)
The electric rearview mirror automati‐
cally controls the glare from the head‐ lights of the vehicles behind you in
nighttime or low light driving condi‐
tions. The sensor mounted in the mir‐ ror senses the light level around the ve‐
hicle, and automatically controls the
headlight glare from the vehicles be‐ hind you.
When the engine is running, the glare is
automatically controlled by the sensor
mounted in the rearview mirror.
Whenever the shift lever is shifted into reverse (R), the mirror will automatical‐
ly go to the brightest setting in order
to improve the driver's view behind the vehicle.
CAUTION
When cleaning the mirror, use a pa‐per towel or similar material damp‐ened with glass cleaner. Do notspray glass cleaner directly on themirror. It may cause the liquid clean‐er to enter the mirror housing.
0+'-
To operate the electric rearview mirror:
• The mirror defaults to the ON posi‐ tion whenever the engine start/stop
button is in the ON position.
Features of your vehicle
5-44

• Press the ON/OFF button (1) to turnthe automatic dimming function off.
The mirror indicator light (2) will turn off.
Press the ON/OFF button (1) to turn
the automatic dimming function on.
The mirror indicator light (2) will illu‐
minate.
❈ (2): Indicator, (3): Sensor
Outside rearview mirror
Be sure to adjust the mirror angles be‐
fore driving.
Your vehicle is equipped with both left- hand and right-hand outside rearview
mirrors. The mirrors can be adjusted
remotely with the remote switch. The mirror heads can be folded back to pre‐
vent damage during an automatic car
wash or when passing through a nar‐ row street.
WARNING
nRearview mirrors
•The outside rearview mirror isconvex. Objects seen in the mirrorare closer than they appear.
(Continued)
(Continued)
•Use your interior rearview mirroror direct observation to determinethe actual distance of followingvehicles when changing lanes.
CAUTION
Do not scrape ice off the mirror face;this may damage the surface of theglass. If ice should restrict the move‐ment of the mirror, do not force themirror for adjustment. To removeice, use a deicer spray, or a spongeor soft cloth with warm water.
CAUTION
If the mirror is jammed with ice, donot adjust the mirror by force. Usean approved de-icer spray (not radi‐ator antifreeze) to release the fro‐zen mechanism or move the vehicleto a warm place and allow the ice tomelt.
WARNING
Do not adjust or fold the outsiderearview mirrors while the vehicle ismoving. This could result in loss ofcontrol and an accident which couldcause death, serious injury or prop‐erty damage.

5-45
5
Features of your vehicle

INSTRUMENT CLUSTER
¥
5ZQF
"
GPS
)ZCSJE
¥
5ZQF
#
GPS
)ZCSJE
0+')-#0+')-#1. Hybrid system gauge
2. Fuel gauge
3. Speedometer
4. Warning and indicator lights
5. LCD display (including Trip comput‐er)
6. Battery SOC (State of Charge) gauge
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to the
L

5ZQF
"
GPS
1MVH
JO
)ZCSJE
5ZQF
#
GPS
1MVH
JO
)ZCSJE
1. Hybrid system gauge
2. Fuel gauge
3. Speedometer
4. Warning and indicator lights
5. LCD display (including Trip comput‐er)
6. Battery SOC (State of Charge) gauge
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to the
L

WARNING
Never adjust the instrument clusterwhile driving. This could result in lossof control and lead to an accidentthat may cause death, serious in‐jury, or property damage.
The brightness of the instrument panel
illumination is changed by pressing the illumination control button (L

Service in OFF
0+'-
If the service interval is not set, "Serv‐
ice in OFF" message is displayed on the LCD display.
NOTICE
If any of the following conditions oc‐
curs, the mileage and days may be
incorrect.
(Continued)
(Continued)
-The battery cable is disconnected.
-The fuse switch is turned off.
-The battery is discharged.
Master warning mode (if
equipped)
• This warning light informs the driver of the followingsituations: - Blind Spot Detection (BSD) mal‐ function (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
- High Beam Assist (HBA) malfunc‐ tion (if equipped)
- Lamp malfunction
- Service reminder and so on.
The Master Warning Light illuminates if one or more of the above warning sit‐
uations occur. At this time, the LCD
Modes Icon will change from (
) to
().
If the warning situation is solved, the
master warning light will be turned off and the LCD Modes Icon will be changed
back to its previous icon (
).
User settings mode
Description
0+'-
On this mode, you can change setting
of the doors, lamps, and so on.
Features of your vehicle
5-58

Turn by turn mode (if equipped)
0+'-
This mode displays the state of the
navigation.
LDWS/LKAS (if equipped)
-%84
0+')1-
-,"4
0+')1-
This mode displays the state of the
Lane Departure Warning System (LDWS) and Lane Keeping Assist Sys‐
tem (LKAS). For more information, refer to L

• At this time, the Engine Start/StopButton turns to the ACC position (If
you press the Engine Start/Stop But‐ ton once more, it will turn to the ON
position).
Low key battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lock
when the Engine Start/Stop Button changes to the OFF position.
Check steering wheel lock system
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop
Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates if the smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if the smart key is not detected when
you press the Engine Start/Stop But‐
ton.
Press start button again (for smart
key system)
• This warning message illuminates if you cannot operate the Engine Start/
Stop Button when there is a problem with the Engine Start/Stop Button
system.
• It means that you could start the en‐ gine by pressing the Engine Start/
Stop Button once more.
• If the warning illuminates each time you press the Engine Start/Stop But‐ton, we recommend that you have
the vehicle inspected by an author‐
ized Kia dealer.
Press start button with key (for
smart key system)
• This warning message illuminates if you press the Engine Start/Stop But‐
ton while the warning message L