clock KIA RIO 2017 Owner's Guide

777
Maintenance
Turn signal light/Position light or Side
marker
Follow the steps 1 to 4 from the previous
page.
5. Remove the socket from the assemblyby turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
6. Remove the bulb from the socket by pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket 7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
Position light (if equipped)
If the light bulb does not operate, have
the vehicle checked by an authorized Kia
dealer.
OUB071031N
OUB071055
OUB071077
OUB071056
■ 4 door
■ 5 door

Maintenance
78
7
Front fog light bulbs (if equipped)
1. Remove the under cover by rotating
the screws.
2. Reach your hand into the back of the front bumper.
3. Disconnect the power connector from the socket.
4. Remove the bulb-socket from the housing by turning the socket counter
clockwise until the tabs on the socket
align with the slots on the housing.
5. Install the new bulb-socket into the housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
6 Connect the power connector to the socket.
Side repeater light bulb replace-
ment (if equipped)
Type A
If the light bulb does not operate,have the
vehicle checked by an authorized Kia
dealer. A skilled technician should check
or repair the side repeater lamp, for it
may damage related out side mirror parts
of the vehicle.
Type B
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the lens part.
4. Remove the bulb by pulling it straight out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens part.
7. Connect the bulb electrical connector.
8. Reinstall the light assembly to the body of the vehicle.
OUB071034OUB071057

Maintenance
80
7
4. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
5. Remove the bulb from the socket by pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into the socket and rotating it until it locks
into place. 7. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Install the service cover by putting it into the service hole.

1. Turn off the engine.
2. Open the tailgate.
3. Loosen the light assembly retainingscrews with a cross-tip screwdriver.
4. Remove the rear combination light assembly from the body of the vehicle.
OUB071070KOUB071037

781
Maintenance
5. Remove the socket from the assemblyby turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
6. Remove the bulb from the socket by pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into the socket and rotating it until it locks
into place. 8. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
9. Reinstall the light assembly to the body of the vehicle.Inside light
Back-up light/tail light

1. Turn off the engine.
2. Open the trunk.
3. Loosen the retaining screw of the trunklid cover and then remove the cover.
4. Remove the socket from the assembly by turning the socket counter clock-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by pressing it in and rotating it until the tabs
on the bulb align with the slots in the
socket. Pull the bulb out of the socket.
OUB071038OUB071071K

Maintenance
82
7
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket into the assembly by aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Reinstall the trunk lid cover by pushing in the screw.
1. Turn off the engine.
2. Open the tailgate.
3. Remove the service cover.
4. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
5. Remove the bulb from the socket by pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into the socket and rotating it until it locks
into place.
OUB071072KOUB071058OUB071039

783
Maintenance
7. Install the socket in the assembly byaligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Install the service cover by putting it into the service hole.
High mounted stop light replace-
ment

1. Turn off the engine
2. Open the trunk 3. Remove the socket from the assembly
by turning the socket counter clock-
wise until the tabs on the socket align
with the slots on the assembly.
4. Remove the bulb by pulling it straight out.
5. Insert a new bulb in the socket.
6. Reinstall the socket in the assembly in the reverse order of removal.
OUB075112
OUB075107K

Maintenance
84
7

1. Turn off the engine
2. Open the tailgate.
3. Gently remove the rubber cover (1).
4. Disconnect the electrical connector. 5. Loosen the retaining nuts.
6. Remove the washer hose socket from
the lamp assembly by turning the
socket counter clockwise until the tabs
on the socket align with the slots on
the assembly.
7. Reinstall a new light assembly in the reverse order of removal.
License plate light bulb replace-
ment
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by pulling it straightout.
4. Install a new bulb in the socket and install the socket to the lens.
5. Reinstall the lens securely.
OUB071060N
OUB071042
OUB071043OUB071061N

I5
Index
If the engine stalls at a crossroad or crossing ···············6-3
If you have a flat tire while driving··················\
·············6-3
Instrument cluster ··················\
··················\
··················\
····4-43 Automatic transaxle shift position indicator ···············4-51
Car option (only for Type B cluster) ··················\
·········4-52
Gauges ··················\
··················\
··················\
··················\
·4-44
Illumination intensity ··················\
··················\
··············4-51
Instrument panel illumination ··················\
··················\
·4-44
Maintenance system (only for Type B cluster) ···········4-53
Manual transaxle shift indicator ··················\
················4-50
User Settings (only for Type B cluster)···············\
········4-51
Warnings and indicators ··················\
··················\
··········4-55
Instrument panel overview··················\
··················\
···········2-5
Interior features··················\
··················\
··················\
······4-114 Ashtray ··················\
··················\
··················\
················4-114
Cigarette lighter ··················\
··················\
··················\
···4-114
Clothes hanger ··················\
··················\
··················\
·····4-119
Cup holder ··················\
··················\
··················\
···········4-115
Digital clock and calendar ··················\
··················\
·····4-118
Floor mat anchor(s) ··················\
··················\
···············4-119
Navigation system ··················\
··················\
·················4-12\
0
Power outlet ··················\
··················\
··················\
·········4-117
Shopping bag holder··················\
··················\
··············4-117
Sliding armrest ··················\
··················\
··················\
····4-116
Sunvisor ··················\
··················\
··················\
···············4-116
Interior light ··················\
··················\
··················\
·············4-81 Glove box lamp ··················\
··················\
··················\
·····4-82
Luggage room lamp··················\
··················\
·················4-82\
Map lamp ··················\
··················\
··················\
··············4-81
Room lamp ··················\
··················\
··················\
············4-81
Vanity mirror lamp ··················\
··················\
··················\
4-82
Interior overview··················\
··················\
··················\
········2-4
ISG (Idle Stop and Go) system ··················\
··················\
·5-39 Auto start ··················\
··················\
··················\
···············5-40
Auto stop ··················\
··················\
··················\
···············5-39
Condition of ISG system operation ··················\
···········5-41
ISG system deactivation ··················\
··················\
··········5-42
ISG system malfunction ··················\
··················\
··········5-42
Key positions ··················\
··················\
··················\
·············5-5 Ignition switch position ··················\
··················\
·············5-5
Illuminated ignition switch··················\
··················\
········5-5
Keys ··················\
··················\
··················\
··················\
·········4-3 Key operations ··················\
··················\
··················\
·········4-3
Record your key number ··················\
··················\
···········4-3
Light bulbs ··················\
··················\
··················\
···············7-73 Headlight, position light, turn signal light, sidemarker light and front fog light bulb replacement ····7-74
High mounted stop light replacement ··················\
·······7-83
K
L