seats KIA SEDONA 2019 Owner's Manual

Features of your vehicle
196
4
Seat warmer (if equipped)
The seat warmer is provided to warm
the front seats during cold weather.
With the ignition switch in the ON
position, push either of the switches
to warm the driver's seat or the front
passenger's seat. During mild weather or under condi-
tions where the operation of the seat
warmer is not needed, keep the
switches in the “OFF” position.
Each time you press the switch,
the temperature setting of the seat
will change as follows :
The seat warmer defaults to the OFF position whenever the ignition
switch is turned on.
✽ ✽ NOTICE
With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automatical-
ly depending on the seat tempera-
ture.
OFF→ HIGH( )→ MIDDLE( )→LOW( )
→
OYP048318N
OYP044084N
■Rear seat
■Front seatWARNING- Seat heater
burns
The seat warmer may cause
burns, even at low tempera-
tures, if used over a long period
of time. Never allow passengers
who may not be able to take
care of themselves to be
exposed to the risk of seat
heater burns. These include:
1. Infants, children, elderly or disabled persons, or hospital
outpatients
2. Persons with sensitive skin or those that burn easily
3. Fatigued individuals
4. Intoxicated individuals
5. Individuals taking medication that can cause drowsiness or
sleepiness (sleeping pills,
cold tablets, etc.)

4197
Features of your vehicle
Air ventilation seat (if equipped)
The temperature setting of the seat
changes according to the switch
position.
If you want to cool your seat cush-ion, press the switch (blue color).
Each time you press the button, the airflow will change as follows: The seat warmer (with air ventila-
tion) defaults to the OFF position
whenever the ignition switch is
turned on.
✽ ✽ NOTICE
For best seat cooling results, use
with air-conditioning.
Sunvisor
Use the sunvisor to shield direct light
through the front or side windows.
To use the sunvisor, pull it downward.
To use the sunvisor for the side win-
dow, pull it downward, unsnap it from
the bracket (1) and swing it to the
side (2).
Adjust the sunvisor extension for-
ward or backward (3). (if equipped)
To use the vanity mirror, pull down the
visor and slide the mirror cover (4).
OYP048410N
OFF→ HIGH( )→ MIDDLE( )→LOW( )
→
CAUTION - Seat damage
When cleaning the seats, do
not use an organic solventsuch as paint thinner, ben-zene, alcohol and gasoline.Doing so may damage the airventilation seat.
Do not place heavy or sharp objects on the seat. Thosethings may damage the airventilation seat.
Be careful not to spill liquid such as water or beverages onthe seat. If you spill some liquid,wipe the seat with a dry towel.Before using the air ventilationseat, dry the seat completely.
OYP044086K

Driving your vehicle
128
5
WARNING- Loose cargo
Do not travel with unsecured
blunt objects in the passenger
compartment of your vehicle
(e.g. suit cases or unsecured
child seats). These items may
strike occupant during a sud-
den stop or crash.

What to do in an emergency
12
6
A flat tire indoor storage
 In the 3rd row seats unfolded
upright
1. With the flat tires in the center of the third row seats, place the outer
part of the wheel facing the lift-
gate.
2. Pass the fixing belt through the inside of the wheel. 3. Connect the fixing belt to the strik-
er (a) located at the bottom
left/right side of the back of the
third row seats.
4. Tighten the fixing belt securely.
OYP068034N
OYP068035NOYP068036N

613
What to do in an emergency
In the 3rd row seats folded flat
1. Place the flat tire with its outer part facing upwards in the middle of the
three-row seats.
2. Pass the fixing belt through the inside of the wheel. 3. Connect the fixing belt to the strik-
er (a) located at the bottom
left/right side of the back of the
third row seats.
4. Tighten the fixing belt securely.
OYP068037NOYP068038NOYP068039N

Maintenance
48
7
Traction - AA, A, B & C
The traction grades, from highest to
lowest, are AA, A, B and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on spec-
ified government test surfaces of
asphalt and concrete. A tire marked
C may have poor traction perform-
ance.
The traction grade assigned to this
tire is based on straight-ahead brak-
ing traction tests, and does not
include acceleration, cornering,
hydroplaning, or peak traction char-
acteristics. Temperature -A, B & C
The temperature grades are A (the
highest), B and C representing the
tire’s resistance to the generation of
heat and its ability to dissipate heat
when tested under controlled condi-
tions on a specified indoor laboratory
test wheel.
Sustained high temperature can
cause the material of the tire to
degenerate and reduce tire life, and
excessive temperature can lead to
sudden tire failure. Grades B and A
represent higher levels of perform-
ance on the laboratory test wheel
than the minimum required by law.
Tire terminology and definitions
Air Pressure:
The amount of air
inside the tire pressing outward on
the tire. Air pressure is expressed in
pounds per square inch (psi) or kilo-
pascal (kPa).
Accessory Weight: This means the
combined weight of optional acces-
sories. Some examples of optional
accessories are, automatic transmis-
sion, power seats, and air condition-
ing.
Aspect Ratio: The relationship of a
tire's height to its width.
Belt: A rubber coated layer of cords
that is located between the plies and
the tread. Cords may be made from
steel or other reinforcing materials.
Bead: The tire bead contains steel
wires wrapped by steel cords that
hold the tire onto the rim.
Bias Ply Tire: A pneumatic tire in
which the plies are laid at alternate
angles less than 90 degrees to the
centerline of the tread.

Maintenance
96
7
Taking care of leather seats
Vacuum the seat periodically to
remove dust and sand on the seat.
It will prevent abrasion or damage of
the leather and maintain its quality.
Wipe the natural leather seat cover often with dry or soft cloth.
Sufficient use of a leather protec- tive may prevent abrasion of the
cover and helps maintain the color.
Be sure to read the instructions
and consult a specialist when
using leather coating or protective
agents.
Leather with bright colors(beige, cream beige) is easily contaminat-
ed and clear in appearance. Clean
the seats frequently.
Avoid wiping with wet cloth. It may cause the surface to crack.
Cleaning the leather seats
Remove all contaminations instant-ly. Refer to instructions below for
removal of each contaminant.
Cosmetic products(sunscreen, foundation, etc.)
- Apply cleansing cream on a clothand wipe the contaminated point.
Wipe off the cream with a wet
cloth and remove water with a dry
cloth.
Beverages(coffee, soft drink, etc.) - Apply a small amount of neutraldetergent and wipe until contami-
nations do not smear.
Oil - Remove oil instantly withabsorbable cloth and wipe with
stain remover for natural leather
only.
Chewing gum - Harden the gum with ice andremove gradually.CAUTION - Electrical
components
Never allow water or other liq-uids to come in contact withelectrical/electronic compo-nents inside the vehicle as thismay damage them.
CAUTION - Leather
When cleaning leather products(steering wheel, seats etc.), useneutral detergents or low alco-hol content solutions. If you usehigh alcohol content solutionsor acid/alkaline detergents, thecolor of the leather may fade orthe surface may get stripped off.

797
Maintenance
Fabric seat cover using precau-tions (If equipped)
Please clean the fabric seats regu-
larly with a vacuum cleaner in con-
sideration of fabric material charac-
teristics. If they are heavily soiled
with beverage stains, etc., use a suit-
able interior cleaner. To prevent dam-
age to seat covers, wipe off the seat
covers down to the seams with a
large wiping motion and moderate
pressure using a soft sponge or
microfiber cloth.
Velcro closures on clothing or sharp
objects may cause snagging or
scratches on the surface of the
seats.
Make sure not to rub such objects
against the surface.
Cleaning the upholstery and inte-rior trim
Vinyl
Remove dust and loose dirt from
vinyl with a whisk broom or vacuum
cleaner. Clean vinyl surfaces with a
vinyl cleaner.
Fabric
Remove dust and loose dirt from fab-
ric with a whisk broom or vacuum
cleaner. Clean with a mild soap solu-
tion recommended for upholstery or
carpets. Remove fresh spots imme-
diately with a fabric spot cleaner. If
fresh spots do not receive immediate
attention, the fabric can be stained
and its color can be affected. Also, its
fire-resistant properties can be
reduced if the material is not proper-
ly maintained.
Using anything but recommended
cleaners and procedures may affect
the fabric’s appearance and fire-
resistant properties.
Cleaning the lap/shoulder beltwebbing
Clean the belt webbing with any mild
soap solution recommended for
cleaning upholstery or carpet. Follow
the instructions provided with the
soap. Do not bleach or re-dye the
webbing because this may weaken it.
Cleaning the interior window glass
If the interior glass surfaces of the
vehicle become fogged (that is, cov-
ered with an oily, greasy or waxy
film), they should be cleaned with a
glass cleaner. Follow the directions
on the glass cleaner container.
CAUTION - Rear window
Do not scrape or scratch theinside of the rear window. Thismay result in damage of the rearwindow defroster grid.

I13
Index
Scheduled maintenance service . . . . . . . . . . . . . . . . . . . 7-9Maintenance under severe usage conditions . . . . . . 7-13
Normal maintenance schedule . . . . . . . . . . . . . . . . . 7-10
Seat belt restraint system . . . . . . . . . . . . . . . . . . . . . . . 3-35
Seat belt warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
3-35 Care of seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-51
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-49
Pre-tensioner seat belt . . . . . . . . . . . . . . . . . . . . . . . 3-46
Seat belt restraint system . . . . . . . . . . . . . . . . . . . . . 3-35
Seat belt warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
Seat warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-196
Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . 3-2 2nd row seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
2nd row seat (ForSXL). . . . . . . . . . . . . . . . . . . . . . . . 3-3
3rd row seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3rd row seat (ForSXL) . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Front seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Front seat (ForSXL) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Securing a child restraint seat withchild seat lower anchor system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
3-59
Securing a child restraint seatwith tether anchor system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
3-58
Side air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-78\
Side curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-206
Side marker (front) (Bulb type) bulb replacement (Headlamp Type A) . . . . . . . . . . . . . . . . . . . . . . . . . 7-72 Side marker (rear) (Bulb type) bulb replacement
(Rear combination lamp Type A) . . . . . . . . . . . . . . . 7-78
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type B) . . . . . . . . . . . . . . . 7-81
Side repeater lamp (LED type) bulb replacement . . . . 7-74
Sliding the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-65
Smart cruise control with stop & go system . . . . . . . . 5-63 Limitations of the system . . . . . . . . . . . . . . . . . . . . . 5-76
Smart cruise control switch . . . . . . . . . . . . . . . . . . . 5-65
Speed setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-65
To adjust the sensitivity of smart cruise control system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-\
75
To convert to cruise control mode . . . . . . . . . . . . . . 5-75
Vehicle to vehicle distance setting . . . . . . . . . . . . . . 5-70
Smart key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-\
14 Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Immobilizer system . . . . . . . . . . . . . . . . . . . . . . . . . 4-21
Loss of the smart key . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Record your key number . . . . . . . . . . . . . . . . . . . . . 4-14
Smart key function . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Smart key precautions . . . . . . . . . . . . . . . . . . . . . . . 4-19
Smart key function (Smart key) . . . . . . . . . . . . . . . . . . 4-14
Smart key precautions (Smart key) . . . . . . . . . . . . . . . 4-19
Smart liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46 Detecting area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
How to deactivate the smart liftgate function using the smart key . . . . . . . . . . . . . . . . . . . . . . . . 4-49
How to use the smart liftgate . . . . . . . . . . . . . . . . . . 4-47