display KIA SELTOS 2021 Navigation System Quick Reference Guide

9-2
Head-Up Display (if equipped)
You can set to use the head-up display that displays information
such as driving speed and road-related information while driving.
Enable Head-Up Display (if equipped)
Can determine whether or not to use the head-up display.
Display Control (if equipped)
Adjust the head-up display position, video location & rotation, and
its brightness.
Content Selection (if equipped)
Select the items to display on the head-up display.
Speedometer (if equipped)
Can set the driving speed items and colors to display on the head-
up display.
Configuring the vehicle
settings
(if equipped)
You can configure the functions for driving and related
environments.A
A
Any changes to the settings of the vehicle should be done
while the vehicle is safely parked.
A
A
You can change vehicle environment settings only when the
engine is running.
A
A
Available settings may differ depending on the vehicle model
and specifications.
A
A
Depending on the climate control system, some functions
may not be supported.
1 On the All Menus screen, press Setup >
Vehicle.
The vehicle settings screen appears.
2 Configure the settings required:
A
A
Press Menu >
Search for Settings or press and enter a
keyword to search for a setting item. You can also search for a
setting item by voice.

9-6
Active Assist: Helps prevent collision by generating warning
sound and helping you adjust the vehicle speed if any
suspected blind spot collision danger.
ÝWarning
Always be aware of road conditions while driving and be
alert for unexpected situations even though the Blind-Spot
Collision Warning system and Blind-Spot Collision Avoidance
Assist system are operating.
Warning Only: When a danger of blind spot collision is
detected, the warning sound is generated.
Off: Turns off the blind spot safety function.
Blind-Spot Safety (if equipped)
You can set to generate warning sound and may provide active
assist if there is a possible collision with an approaching vehicle
while changing lanes.
Blind-Spot View: Displays the blind spot view on the
instrument cluster when the turn signal lamp is blinking.
Safe Exit Assist: Help prevent the passengers from opening
a door by warning the passengers when an approaching
vehicle from the rear area is detected after the vehicle stops.
ÜCaution
The Safe Exit Assist (SEA) system may not operate
normally when a vehicle is coming rapidly two lanes over
from your vehicle or a vehicle is approaching at a fast
speed from the rear in the lane next to your vehicle.
The Safe Exit Assist (SEA) system may not operate
normally if there is any vehicle or obstacle at the rear
area of your vehicle.
The Safe Exit Assist (SEA) system may be activated later
than normal or may not operate normally if a vehicle is
approaching fast from the rear of your vehicle.
The Safe Exit Assist system may not operate when the
blind spot detection system malfunctions as follows:

The blind spot collision warning message appears on
the instrument cluster.

The sensors of the blind spot detection system are
contaminated or covered.

The blind spot detection system does not generate
warning or generates a wrong alert.

9-7
Drive Mode (if equipped)
You can change the vehicle settings for driving conditions.
Type A
Type B (EV only)
A
A
The screen may differ depending on the vehicle model and
specifications.
Parking Safety (if equipped)
You can set to generate warning sound and may provide assist
when an obstacle is detected while parking.
Surround View Monitor Auto On: Display the feed from
the surround view monitor automatically when the parking
distance warning is on (if equipped).
Parking Distance Warning Auto On: Automatically turns on
the alarming function depending on the distance to obstacles
upon parking or driving in low speeds.
Rear Cross-Traffic Safety: Assists to generate warning sound
and may provide assist if a potential collision is detected when
the vehicle is in reverse.
Active Assist: Helps prevent collision by generating warning
sound and may provide braking assist if a potential collision is
detected while the vehicle reversing.
Warning Only: The warning sound is generated if a danger
of collision is detected when reversing the vehicle.
Off: Turns off the parking safety function.
ÝWarning
Even though the vehicle is equipped the parking safety
system, be sure to check any obstacles in the rear while
driving. Relying solely on the driving assist system may cause
an accident. Accordingly, be sure to control the vehicle by
your judgment.
When the sensors cannot detect any obstacles due to the
detection limit, it may cause an accident. Be sure to always
check the surroundings while parking.

9-8
Drive Mode Change Alert (if equipped)
You can set how to display the notification message when the
drive mode is changed.
Detailed Alert
: Displays a detailed notification message along
with the vehicle image when the drive mode is changed.
 Simple Alert: Displays the notification at the top or on the
split screen when the drive mode is changed.
Off: When the drive mode changes, no notification is
provided.
Reset ECO/NORMAL/SPORT (EV only)
You can reset the drive mode settings to the default values.
A
A
The display may differ depending on the vehicle model and
specifications.
A
A
See how to improve ECO potential by pressing the Help
button from an EV(Electric Vehicle). In most cases, a vehicle
can travel a longer distance when its ECO potential score is
higher (EV only).
ECO (EV only)
This is a drive mode for increasing the vehicle's fuel efficiency.
You can change the climate control mode, the active coast energy
regeneration level, and speed limit settings.
NORMAL (EV only)
This is a drive mode focused on the driver and passenger's
comfort. You can change the climate control mode and the active
coast energy regeneration level.
SPORT (EV only)
This drive mode enables a more dynamic driving performance.
You can change the climate control mode and the active coast
energy regeneration level.

9-11
2 Press Unlock (if equipped)
You can set to unlock all doors by pressing the door unlock button
twice.A
A
When you press the door unlock button once, only the driver’s
seat door is unlocked.
Smart Trunk (if equipped)
Opens the trunk automatically when approaching the trunk with
the smart key.
Cluster (if equipped)
You can set the data to display on the instrument cluster and the
volume and type for guiding beep.
Service Interval (if equipped)
You can set to guide you when to perform the vehicle inspection.
Enable Service Interval: Sets the service inspection interval.
When it exceeds, the notification is provided.
Distance: Sets the driving distance for a service.
Duration: Sets the service cycle.
Reset: Initializes the settings for distance and duration.
Energy Consumption Reset (if equipped)
You can set to automatically initialize the average fuel economy.
After Ignition: The average fuel economy is automatically
initialize whenever you drive the vehicle.
After Refueling: The average fuel economy is automatically
initialize whenever you refuel the vehicle.
Off: The average fuel economy initialize is unavailable.

9-12
Content Selection (if equipped)
You can set the content to display on the instrument cluster.
Gear Position Pop-up: When the gear is shifted, the
information pop-up appears.
Wiper/Lights Display
: When the wiper or light lever operates,
the operation mode appears.
 Traffic Signs: Displays the road information such as speed
bumps and speed limits.
Icy Road Warning: When the outside temperature drops
below 4 °C (39 °F), the possibility of road icing appears.
Cluster Voice Guidance Volume (if equipped)
You can adjust the volume of guiding beep.
Welcome Sound (if equipped)
You can set to generate the notification sound when turning on
or off the instrument cluster.
Convenience (if equipped)
You can configure the features for convenience such as welcome
sound and wireless charging.
Welcome Mirror/Light (if equipped)
You can set the welcoming time on the outside rear-view mirrors.
Enable on Driver Approach: When the driver with the smart
key approaches, the welcome feature is enabled.
Wireless Charging System (if equipped)
You can set to charge your smartphone wirelessly.
A
A
This feature is available only in smartphones that can be
charged wirelessly.

9-13
Seat (if equipped)
You can configure the settings of the steering wheel or seats,
such as seat position change notification and automatic control
of the steering wheel warmer.
A
A
The screen may differ depending on the vehicle model and
specifications.
Seat Position Change Alert (if equipped)
You can set the system to display a notification message along
with the seat image on the screen when a seat position is
changed.
Smart Posture Care (if equipped)
You can see the recommended driving posture according to your
physical data, and the clinical inspection result for your waist.
Heated/Ventilated Features (if equipped)
You can manage the driving environment pleasantly by linking
the climate controls to the steering wheel warmer and driver’s
seat warmer/ventilation.
Auto. Controls That Use Climate Control Settings:
Automatically controls the heating wire or ventilation for
the driver's seat and steering wheel, in sync with the climate
control function.

Steering Wheel Warmer: Steering Wheel Warmer adjusts
automatically based on Climate settings.

Seat Warmer/Ventilation: Seat Warmer/Ventilation
adjusts automatically based on Climate settings.
Seating Easy Access (if equipped)
For convenience upon getting on and off, you can adjust the
position of the driver's seat or steering wheel to secure space
inside the vehicle.
 Steering Easy Access: The steering wheel moves upward
when getting on and off.
Seat Slide Easy Access: The seat moves forward or backward
by a certain distance when getting on and off.
Rear Seat Heating Control (if equipped)
You can set to enable the warmer for the rear-left and rear-right
seats.

9-17
Configuring the advanced
system settings
(if equipped)
You can configure the settings for notification and button actions.
1 On the All Menus screen, press Setup >

Advanced.
The advanced settings screen appears.
2 Configure the settings required:
Return to Map: Set Time
You can set the system to automatically display the map screen
after a specified period of time when switched to the Radio/Media
mode screen while using the navigation.
A
A
This function works while driving once a destination has been
set.
A
A
This feature is not available on the phone projection screen.

9-20
Split Screen (if equipped)
You can specify the items to display on the Split Screen.
AAThe screen may differ depending on the vehicle model and
specifications.
A
A
This option is only available when the display supports Split
Screen.
A
A
On the screen list, press
on the right and drag the item to
reposition.
My Data
You can import location data from a USB device to the system, or
export the data on the system to a USB device.
A
A
When importing or exporting the location data, you can use
only the USB device formatted in exFAT, FAT16/32, or NTFS.

9-21
Import Address Book from USB Device
You can import the location data on a USB device to the system.A
A
The previous location data on the system is to be deleted.
A
A
While importing from a navigation system that uses a
different coordinate system, the locations may appear
differently.
Export Address Book to USB Device
You can export the location data on the system to a USB device.
A
A
The location data on the USB device is deleted.
Extend Rear Camera Use (if equipped)
You can set to display the rear camera display even when you
change the shift position other than “R” (Reverse) after reversing.
A
A
When you shift to "P" (Park) or drive at a predetermined
speed or faster, the rear view display disappears to display the
previous screen.
Configuring the button
settings
You can configure features to activate when pressing buttons on
the control panel or steering wheel.
1 On the All Menus screen, press Setup >
Button.
The button settings screen appears.
2 Configure the settings required:
A
A
Press Menu >
Search for Settings or press and enter a
keyword to search for a setting item. You can also search for a
setting item by voice.