display KIA SELTOS 2021 Navigation System Quick Reference Guide

4-9
Resuming playback of the previous Bluetooth
audio file
You can play the previous Bluetooth audio file during playback.
Perform any of the following methods:
On the Bluetooth audio playback screen, press twice.
On the control panel, press the [
SEEK] button twice.
A
A
The actions required may differ depending on the connected
device.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.
A
A
On the control panel, turn the [TUNE/ FILE] knob to search for
a music file and press the knob within 5 seconds to play it.
A
A
When there is no operation for 5 seconds, the search stops
and the system displays the information of the playing
content.
Pause/Resume
You can pause or resume playback of a Bluetooth audio file.
On the Bluetooth audio playback screen, press
or
.
Resuming playback of the current Bluetooth
audio file
You can play the current Bluetooth audio file from the beginning.
Perform any of the following methods:
 On the Bluetooth audio playback screen, press .
On the control panel, press the [
SEEK] button.
A
A
The actions required may differ depending on the connected
device.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.

4-10
Resuming playback of the next Bluetooth audio
file
You can play the next Bluetooth audio file during playback.
Perform any of the following methods:
On the Bluetooth audio playback screen, press .
On the control panel, press the [
TRACK ] button.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.
A
A
On the control panel, turn the [TUNE/FILE] knob to search for
a music file and press the knob within 5 seconds to play it.
A
A
When there is no operation for 5 seconds, the search stops
and the system displays the information of the playing
content.

5-2
Navigation functions
Navigation Menu overview
You can use the navigation system conveniently through various
functions on the Navigation Menu screen.
Perform any of the following methods:
On the All Menus screen, press Navigation Menu.
On the control panel, press the [
NAV] button.
am
c
l
defg
hijk
b
a Returns to the previous step.
b You can change the Navigation-related settings.
c Search for a location by entering various types of keywords
such as place name and address.
> See “ Searching by keyword.”
d Search for POIs by category to set as a destination.
> See “Searching the nearby points of interest.”
e Select any of previous destinations to set as a destination.
> See “Searching by previous destinations.”
f Register the location or use the address book for setting a
destination.
> See “Using the address book.”
g You can easily search for Kia Dealerships. > See “Searching for
Kia Dealerships.”
h You can cancel guidance to the destination. > See “ Stopping the
route guidance.”
i You can see the entire route information to the destination.
j You can edit the current route so that you can travel via
waypoints on the way to the destination.
> See “ Editing the
route.”
k You can change the route search criteria to resume routing.
> See “ Changing the route search criteria.”
l You can register your home, office, or other frequently visited
places as a favorite for ease of search.
> See “Registering a
frequently visited place as a favorite place.”
m The list of menu items appears.
 Reorder Icons: Can change the location of an icon on the
Navigation Menu screen.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
A
A
Available icons and their arrangement may differ depending
on the vehicle model and specifications.

5-4
ÜCaution
Distracted driving or negligence in keeping your eyes forward
may cause a loss of vehicle control. Never use any devices or
systems that take the driver’s attention away from driving.
The information on the map may differ from actual road
conditions, depending on the location or driving conditions.

Digitalized roads may not be identical to the actual roads.
When guidance does not match the actual route, drive the
vehicle according to actual road conditions.

The system may provide guidance that differs from the
actual route due to a change in road conditions. When
guidance does not match the actual route, drive the vehicle
according to road conditions with observing the traffic
regulations. When the vehicle reaches a zone that matches
the actual route, the system guides the route correctly.
A
A
Vehicle location may not be displayed correctly if:

The vehicle is driving on a Y-shaped or winding road with
narrow angles.

The vehicle is driving closely to another road.

The vehicle is driving on a road where there are many tall
buildings in the vicinity.

The vehicle is driving on a new road or a road under
construction.

The vehicle is transported by a ferry or heavy-duty transport
vehicle.
4 Check the location of the destination and then
press Set as Destination.
AA
If you press Parking at the bottom right of the screen, the
map screen displays the parking lot icon.
5 Select the desired route from the searched ones
and press Start Guidance.

5-5
A
A
Navigation service may not be provided correctly under the
following conditions:

When the vehicle drives on a straight road continuously,
the system may guide you to drive straight. It is not a
malfunction.

Guidance may not be followed immediately after the
vehicle makes a turn at an intersection or drives through an
intersection.

The system may guide you to make a U-turn in a prohibited
area.

The system may guide you to a traffic-blocked road (e.g. no-
entry road or road under construction).

The system may guide you to a road away from the
destination when there is no road to the destination or
there are only narrow roads on the way.

Guidance may not be proper when the vehicle is off the
route.

Guidance may not match the actual distance on an
overpass or underpass due to the difference of the start
point.

When you are driving at high speeds, route recalculations
may take longer.
A
A
Because the navigation system is used for information
purposes only, Kia does not assume responsibility of the
accuracy of the information.
A
A
When the traffic information is not received, the status icon
appears at the top of the map screen.

HD Radio: The system is using the HD radio data. If no
traffic information is available, the status icon (
)
will be
displayed instead.

The vehicle is driving in a rugged mountain area or on a
steep curve road.

The vehicle is entering a public road after making a turn
through the turntable in an underground parking lot or
multi-story parking lot.

The vehicle stops and starts repeatedly or moves slowly in
front of an intersection.

The system reboots after the vehicle battery has been
recharged or replaced.

The vehicle is driving on a slippery road due to heavy snow,
etc.

The tires have been replaced recently or spare tires (or
studless tires) are used.

Improper-sized tires are used or the pressure of each tire is
different.

The replaced tire is worn out or the studless tires have been
used for over two seasons.

A roof carrier is installed on the vehicle.

On a highway. continued driving causes the system to
perform map matching or apply the updated GPS data.

5-6
a Displays the Home screen.
b Used to change the map display mode.
 (Heading Up): Rotates the map depending on the
travel direction.
 (North Up): Displays the map with the north fixed at
the top.
 (3D Map): Rotates the map depending on the travel
direction for 3D view.
c You can adjust the volume of navigation or GPS warning
sound.
d Zooms in the map.
e The scale of the map automatically changes.
f Zooms out the map.
g Displays the point to change the driving direction.
h Displays the next point to change the driving direction.
i Displays the lanes in different colors.
 Orange: Recommended lane
White: Available lane
Gray: Unavailable lane
Map screen
The map screen provides various functions and information, as
follows:
i
hg
j
a
b
c
d
e
f
klm
n
Type A
o
7\SH%(9R\
QO\\f

5-7
Using the detailed guidance
When the vehicle needs to change the driving direction or lanes,
a zoomed-in map automatically appears.A
A
To display or hide the detailed guidance, press
or .
When the detailed guidance appears while driving,
select and perform the desired function.
To check information on the zone for a turn, press Simple.
To check the types and locations of convenience facilities in a
rest area, press Rest Area.
For information details about each zone such as intersections,
interchanges, and rest areas, press Details.
j Displays quick menu items that can be used during guidance.
k Can cancel the route guidance. > See “
Stopping the route
guidance.”
l Displays the remaining distance to the destination and
the estimated time of arrival. For more details, press the
information item.
m Displays or hides the detailed guidance.
n You can see the system information on the map. (It can
display up to two items.)
 Traffic information (with an icon if there is no HD data
reception)
Bluetooth connection status
o Check the range you can drive with the current amount of
battery (EV only).
A
A
To see only the map with no destination, press the map area
on the Home screen or on the All menu screen, press Map. Or
press the [ MAP] button on the control panel.
A
A
The screen may differ depending on the vehicle model and
specifications.
ÝWarning
Be sure to check the road conditions while driving, because the
camera information may get changed occasionally after a map
update to the latest version. Relying solely on the driving assist
system may cause violation of traffic rules and regulations,
resulting in an accident.

5-8
Stopping the route guidance
To stop route guidance, press Pause Route.
The destination displayed at the bottom of the screen disappears
and the Pause Route is replaced by Resume Route.A
A
To resume guidance to the previous destination, press
Resume Route.
A
A
To cancel guidance to the destination, press and hold Pause
Route , Resume Route , or Navigation Menu >
Cancel Route
on the All Menus screen.
Seeing traffic Information
You can see real-time traffic information such as ongoing road
works or accidents.
1 On the map screen, press > Traffic.
Adjusting the navigation volume
You can adjust the volume of navigation or GPS warning sound.
On the map screen, press and then press or ,
or use the control bar to adjust the volume.
A
A
To have the navigation sound always output first over media
sound, check Navigation Volume Priority.
A
A
To turn off the navigation sound, press
and then press .

5-10
2 Enter the location data such as place name,
address, or coordinates and then press OK.
A
A
When there are any similar matches, the
recommendations appear at the right of keypad.
A
A
To access the online user’s manual on the Places screen,
press Menu >
User's Manual on Web (QR Code) and
then scan the displayed QR code.
3 Select a destination from the search result.
A
A
You can see the sites in the list on the preview screen at
the right.
A
A
To sort the search results in a different order, press on the
attribute to toggle between options.
Searching by keyword
Enter various types of keywords such as place name and address
and then search for the destination.
1 On the Navigation Menu screen, press Places.
AAAvailable icons and their arrangement may differ
depending on the vehicle model and specifications.

5-11
Searching by previous destinations
You can set a destination by selecting from the recently searched
ones.
1 On the Navigation Menu screen, press Previous
Destinations.
The navigated destinations appear in the list.
AAAvailable icons and their arrangement may differ
depending on the vehicle model and specifications.
4 Check the location of the destination and then
press Set as Destination.
AA If you press Parking at the bottom right of the screen, the
map screen displays the parking lot icon.
5 Select the desired route from the searched ones
and press Start Guidance.