ECO mode KIA SELTOS 2021 Navigation System Quick Reference Guide

6-16
Using functions during a call
During a call, the following screen appears.
Press to use the available options.
b
c
d
ef
ag
a Returns to the previous step.
b Can turn off the microphone so that the other party cannot
hear you.
c Can adjust the microphone volume.
d Displays or hides the dial pad screen.
e Used to switch the call to the mobile phone. This option may
not be available in some phone models.
f Used to end a call.
ÝWarning
Park the vehicle at a safe place before connecting your mobile
phone. It may take the driver attention off the road and cause
a traffic accident which can result in damages, injuries, and/or
death.
Do not talk on your mobile device while driving. Distraction
by the use of a mobile phone may cause you not to recognize
traffic flow around and not to cope with unexpected
situations. As a result, a traffic accident may occur. If
necessary, use the Bluetooth hands-free function and make
the call as short as possible.
A
A
When a mobile phone is connected to the system, the
vehicle’s speaker may be used to output a call tone even
after you leave the vehicle. To disconnect the call, disable the
Bluetooth connection on the system or turn off the Bluetooth
function on the mobile phone.
Rejecting a call
Perform any of the following methods:
Press
Reject on the screen.
On the steering wheel, press the End Call button.
A
A
To reject by sending a call-reject message, press Message.
From the list, select the call-reject message and press Send.
A
A
The call-reject or auto-reply message may not be supported
in some phone models.

6-17
Switching to another call
You can receive another incoming call while in a call. This option
is available only when the connected mobile phone supports the
call hold function. The original call is put on hold.
To switch between two calls, use either option.
Press
Switch.
Press a displayed phone number.
A
A
This option may not be available in some phone models.
g The list of menu items appears.
Privacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on.
Split Screen: Can turn on or off the split screen mode.
A
A
If you set the microphone volume too high, the other party
may have a difficulty understanding you due to noise or
echoing, depending on their mobile phone and surroundings.
Setting the volume to 30 or lower is recommended.
A
A
When the caller is in the contact list, the caller’s name and
phone number of the caller are displayed. Otherwise, only the
phone number appears.
A
A
During a call with a Bluetooth connection, you cannot switch
to another screen such as Radio/Media mode.
A
A
Depending on the phone model, the call volume of the other
party may differ.
A
A
Depending on the phone model, the telephone number may
not appear.

6-19
Checking a new message from the list
1 Perform any of the following methods:
On the All Menus screen, press Phone.
On the steering wheel, press the Call button.
2 On the Bluetooth Call screen, press .
3 Select a message from the list.
4 Check the message.
b
a
e
g
cd
f
a Returns to the previous step.
b Reads out the message through the speakers in the
vehicle.
c Used to select a message registered in the system for
sending a brief reply message.
Bluetooth message screen
b
a
c
e
d
a Returns to the previous step.
b View the list of received messages.
c Can text a message by using the voice recognition.
> See “
Sending a text by using the voice recognition.”
d Find and connect other Bluetooth devices.
e The list of menu items appears.
 Privacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on.
Change Device: Find and connect other Bluetooth
devices.
Bluetooth Settings: Can change the Bluetooth settings.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.

6-20
Sending a text by using the voice
recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system so you can text a message to a contact by using the voice
recognition.A
A
To call using voice recognition, there must be contacts stored
on the system.
A
A
It is available only when the UVO service is active.
1 Perform any of the following methods:
On the All Menus screen, press Phone.
On the steering wheel, press the Call button.
2 On the bluetooth message screen, press .
3 When a guiding beep is heard, say the message.
The system sends the text to the selected contact.
d Used to make a call to a message sender.
e Used to move to the previous or next message.
f Can text a message by using the voice recognition.
> See “
Sending a text by using the voice recognition.”
g The list of menu items appears.
 Split Screen: Can turn on or off the split screen mode.
A
A
The auto-reply messaging may not be available depending on
the smartphone model.
A
A
To edit or delete a message, park the vehicle at a safe place
and access the messaging function on your smartphone. You
cannot edit or delete a message from the system.
A
A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:

Only the sender name appears when the sender
information is saved.

When the sender information is not saved, only the phone
number appears.

You cannot use the auto-reply message function.

When the incoming message notification or lock-screen
view option is off, messages cannot be received.
A
A
The message reader function may not be supported
depending on the system language.

7-3
Voice recognition screen
ba
de
f
c
a According to voice recognition, the icons for voice recognition,
voice guidance, and command process appear.
b The recognized voice command appears in text.
c Shows the representative voice command.
d Ends the voice recognition.
e Displays the voice recognition help.
f The list of menu items appears.
Split Screen: Can turn on or off the split screen mode.
3 To end the voice recognition, perform one of the
following methods:
In standby mode for voice recognition, say "Exit"
On the voice recognition screen, press Exit.
On the steering wheel, press and hold the Voice
Recognition button.
A
A
When the Voice Recognition button is pressed in standby
mode for voice recognition, the standby time is extended.
A
A
When the voice recognition is not available, press the
Voice Recognition button on the steering wheel and use
the voice recognition on your smartphone via phone
projection.
> See “Using the phone projection function.”

7-4
Seeing the voice recognition help
You can see more details on how to perform various functions by
voice commands.
ÜCaution
Park the vehicle at a safe place and see the help.
1 On the steering wheel, press the Voice
Recognition button.
2 Say “Help”.
A
A
When the mode time exceeds before you speak, you can
press Help instead.
Adjusting the voice guidance volume
Adjust the voice guidance volume when the system volume is so
low or high and it interferes with your driving.
When the voice recognition is active, turn the Volume
knob on the control panel.

7-5
Voice recognition Help
g
a
b
de
f
c
a Returns to the previous step.
b The function list appears.A
A
To see the list of voice commands that can be used for
each function, press or say the function.
c You can see the usages for each function.
d Ends the voice recognition.
e You can see the entire help for use of voice commands.
f According to voice recognition, the icons for voice recognition,
voice guidance, and command process appear.
g The list of menu items appears.
Split Screen: Can turn on or off the split screen mode.
3 Select the desired option and see its help.
To see the entire help for use of voice commands, press
at the bottom of the screen.
To see more details on how to use voice commands for
each function, press
next to the function name.
4 After seeing the help, perform any of the following
methods.
On the help screen, press Exit.
In standby mode for voice recognition, say “Exit"

7-19
a Returns to the previous step.
b Displays the list of recorded voice memos.
c Starts or pauses the recording.
d Stops recording.
e The list of menu items appears.
Delete: Can delete a voice memo.
Save to USB Device: Can record a voice memo to a USB
storage device. Check that the USB device is compatible.
>
See “USB storage devices.”
Storage Information: Can see the file size of recorded
voice memos.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.
Voice Memo
You can use the microphone on the vehicle to record and play
voice memos.
Using the voice memos
On the All Menus screen, press Voice Memo.
Voice memo screen
ae
cdb

8-9
Using Voice Local Search
With UVO, you can search for locations from the online map
database by using voice commands.
If you did not update the map or system or you cannot find your
destination in the navigation, you can use the latest information
from the online server to search for locations and receive
guidance.
1 Press the [] button on the vehicle.
Voice recognition starts with voice guidance.
2 After the voice guidance ends and you hear a
beep, say the POI name or Address.
A
A
Depending on the system language, voice recognition
may not be supported.
a Returns to the previous step.
b Can see the weather information for today or the next 3 days.
c Can update to the latest weather information.
d The list of menu items appears.
Current Position: Displays the weather of the current
position.
Waypoint: Displays the weather of the waypoint, if
specified.
Destination: Displays the weather of the destination, if
specified.
Search:
Can see the weather information by searching for
an address.
 Forecast: Can see the weather information for today or
the next 3 days.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.

9-8
Drive Mode Change Alert (if equipped)
You can set how to display the notification message when the
drive mode is changed.
Detailed Alert
: Displays a detailed notification message along
with the vehicle image when the drive mode is changed.
 Simple Alert: Displays the notification at the top or on the
split screen when the drive mode is changed.
Off: When the drive mode changes, no notification is
provided.
Reset ECO/NORMAL/SPORT (EV only)
You can reset the drive mode settings to the default values.
A
A
The display may differ depending on the vehicle model and
specifications.
A
A
See how to improve ECO potential by pressing the Help
button from an EV(Electric Vehicle). In most cases, a vehicle
can travel a longer distance when its ECO potential score is
higher (EV only).
ECO (EV only)
This is a drive mode for increasing the vehicle's fuel efficiency.
You can change the climate control mode, the active coast energy
regeneration level, and speed limit settings.
NORMAL (EV only)
This is a drive mode focused on the driver and passenger's
comfort. You can change the climate control mode and the active
coast energy regeneration level.
SPORT (EV only)
This drive mode enables a more dynamic driving performance.
You can change the climate control mode and the active coast
energy regeneration level.