info center KIA SELTOS 2022 Features and Functions Guide

CENTER PANEL
CENTER PANEL
•System is OFF by default . To turn system ON, press the seat warmer switch
•With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature
•When the Climate Control System’s temperature is turned up to high heat, the Seat Warmers turn on automatically
QUICK TIPS
REMINDERS:
•
Use extreme caution when using the seat warmers to avoid burns . Refer to the Owner ’s Manual for more information
•
If the Auto Climate Control is on, the seat warmers or ventilated seats may turn on automatically based on the set temperature and ambient temperature
LOCK
(But tons located on center panel . Passenger side shown .)See section 4 in the Owner ’s Manual for more information .
44†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDS E LT O S FEATURES & FUNCTIONS GUIDE
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Heated and Ventilated Seats Video
QR CODESeat Warmers*†1 8
A Seat Warmers:
•Press button once for high setting (3 LEDs lit)
•Press button twice for medium setting (2 LEDs lit)
•
Press a third time for low setting (1 LED lit) and again to turn OFF
A

SEATING
For easy adjustments, hold a headrest post with one hand while using the other hand to pull the headrest from underneath .
QUICK TIP
REMINDERS:
•
The headrest only moves up and down as described above . It does not adjust for ward or backward
•
Do not operate the vehicle with the headrests removed . Headrests can provide critical neck and head suppor t in an accident
•But ton may be hard to see if headrest is in its lowest position
A
SEATING
Front Seat Headrest Adjustment†1 0Unfastening Center Seat Belt
To raise headrest — Pull headrest up to the desired position .
To lower headrest — Press lock A, then press the headrest down .
1 . If Seat Belt is buckled, press the release button on the buckle
2 . To retract the center seatbelt webbing B in the 2nd row, use the lap belt tongue plate C to push the “release button” in the small slot on the center belt buckle D
See section 3 in the Owner ’s Manual for more information .
Images are for illustrative purposes only . Actual belt buckle/tongue plate may var y .
See section 3 in the Owner ’s Manual for more information .
47†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Unfastening Center Seat Belt Video
QR CODE
B
C
D

50 *IF EQUIPPEDS E LT O S FEATURES & FUNCTIONS GUIDE
Place the Fuel Cap on the inside of the Fuel Filler Lid when fueling F .
QUICK TIP
REMINDERS:
•
While lowering and closing, keep hands away from under the Hood
•
Open the Hood only after turning the engine off, on a flat sur face, with the gear shift in P (Park) position and set ting the parking brake
•Make sure the hood is securely closed before driving
Fuel Filler Lid ReleaseFuel Cap / Malfunction Indicator
(Check Engine Light)To open the Fuel Filler lid:
1 . Pull the Fuel Filler Door Open Lever A inside the vehicle (on floor left of Driver ’s Seat)
2 . Pull the Fuel Filler door to fully open B
To open the Fuel Cap, turn it counterclockwise C .
To access the Fuel Cap, pull the Fuel Filler Door Open Lever A inside the vehicle (on floor left of Driver ’s Seat) . Tighten for ONE CLICK to prevent Malfunction Indicator from illuminating .
See section 4 in the Owner ’s Manual for more information .
See section 4 in the Owner ’s Manual for more information .
See section 4 in the Owner ’s Manual for more information .
OTHER KEY FEATURES
OTHER KEY FEATURES
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
One-Click Fuel Cap Video
QR CODE
Hood Release Lever and Latch
Opening the Hood:
1 . Pull the Hood Release Lever E to unlatch the Hood
2 . In the front of the vehicle, lift the Hood slightly, push the secondary Latch to the front inside of the Hood’s center and lift the Hood
Closing the Hood:
Lower the Hood by pressing the front center of the Hood . Then, press down to securely lock in place .
A
REMINDER: It is normal operation when tightening to hear one click, and then when Fuel Cap is released, it clicks back .
E
B
C
D