oil change KIA SORENTO PHEV 2023 Features and Functions Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2023, Model line: SORENTO PHEV, Model: KIA SORENTO PHEV 2023Pages: 72, PDF Size: 5.43 MB
Page 12 of 72

10 *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
An “Engine Oil Change Due Soon” message appears on the Instrument Cluster LCD when the engine oil needs to be changed After oil change, reset the oil change reminder in User Set tings* Go to Convenience, then Oil Change
QUICK TIP
VEHICLE SETTINGS
VEHICLESETTINGS
Vehicle Auto Shut-off
Back
60 min.
30 min.
Off
Vehicle will be turned off automatically in
59:01
: ResetOK
A
D
The timer that appears on the Instrument Cluster ’s LCD can be reset using the OK but ton on the right side of the Steering Wheel
QUICK TIP
The Vehicle Auto Shut-off, when certain conditions are met, will turn the vehicle off automatically after a pre-set time (30 or 60 minutes) in the User Settings
A warning on the Instrument Cluster LCD will appear stating the “ Vehicle will be turned off automatically in…” and a chime will sound when the timer starts A
When timer ends, a continuous beep sounds for one minute before the vehicle shuts off
Auto Shut-off Settings – The system is on by default and timer is pre-set to 30 minutes To change the pre-set time settings, go to User Settings on the Instrument Cluster LCD by pressing the Mode button B on right side of the Steering Wheel Select Convenience, then Vehicle Auto Shut-off Move through the selections by pressing the OK button C on the Steering Wheel Select 30 minutes, 60 minutes or Disable
for off D
Vehicle Auto Shut-off System*
REMINDERS:
•
When the vehicle is turned off then on again, the system defaults to on (30-minute pre-set time)
•The system will activate when the vehicle is on and these conditions are met:
-The vehicle is in (P) Park
-The driver ’s seat belt is unfastened
-The driver ’s door is opened
-The passenger seat is not occupied
To enter Service Interval Mode, press the Mode button B, go to User Settings and enter by pressing the OK button C Move up/down to Service Interval by pressing the OK button C, then press the OK button C to enter System will display the number of miles remaining until the next service is due, as well as the type of service due
When service is required, the following will be displayed: Service Required.
To reset the Service Interval Mode system, press and hold the OK button C for more than 1 second
Press the OK button C up/down to go back to the previous mode/item
To turn Service Interval OFF, go to User Settings
Service Interval Setting E
To set the service interval in User Settings mode:
•Press the Mode button B to go to User Settings and press the OK button C to enter
•If Service Interval is OFF, press the OK button C to turn ON
•Press the OK button C up/down to select/change the interval setting
•Press the OK button C to select the interval
Service Interval Mode
(Images are for illustration purposes only and may var y)
See section 5 in the Owner ’s Manual for more information
Refer to section 6 in the Owner ’s Manual for more information
OK
MODE
OK
MODEMODE
OKOK
OKOK
OKOK
OK
MODE
MODEMODE
MODEMODE
OK
MODE
MODEMODE
OK
MODEMODEB
C
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Vehicle Auto Shut-off Video
Kia Full Synthetic Oil Video
QR CODE
900mi/30day
Service Interval
&
Page 72 of 72

(up to 64,000 miles)AMAINTENANCE INTERVALS (MILES)
MAINTENANCE ITEMS8,00016,00024,00032,00040,00048,00056,00064,000
Add fuel additiveCPPPPPPPP
Rotate tiresPPPPPPPP
Engine Oil & Oil Filter (Full Synthetic Oil)RRRRRRRR
Climate control air filterIRIRIRIR
Air cleaner filter (engine)IIRIIRII
Brake fluidIIIIIRII
HSG (Hybrid star ter and generator) beltFIIIIIIIR
Battery conditionIIIIIIII
Brake lines, hoses and connectionsIIIIIIII
Brake discs and padsIIIIIIII
Steering gear rack, linkage & bootsIIIIIIII
Suspension ball jointsIIIIIIII
Air conditioner compressor/refrigerantIIIIIIII
Exhaust systemIIIIIIII
Cooling SystemIIIIIIII
Intercooler, in/out hose, air intake hoseIIII
Fuel lines, hoses and connectionsIIII
Propeller Shaft (AWD)IIII
Driveshaft and bootsIIII
Fuel tank air filter/fuel tank, and fuel caps‡DIIII
Rear Differential / Transfer case oil (AWD)EI
Spark Plugs (Ever y 48,000 miles) R
A . See the Owner ’s Manual for complete maintenance schedule. These are approximate estimated inter vals. Refer to vehicle mileage for maintenance item schedule. B. And, if necessar y, adjust, correct, clean or replace.C . If TOP TIER detergent gasoline is not available, one bot tle of additive is recommended. Additives are available from your authorized Kia dealer along with information on how to use them. Do not mix other additives.D. Both the fuel filter & fuel tank air filter are generally considered to be maintenance free, depending on fuel qualit y being used. However, periodic inspection is recommended. If your vehicle is having issues like fuel flow restriction, power
surging, loss of power, difficult y star ting, etc., replace the fuel filter immediately and consult an authorized Kia dealer for ser vice.E. Transfer case oil and rear differential oil should be changed any time they have been submerged in water.F. Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessar ySee your Owner ’s Manual for more details and complete maintenance information, including severe maintenance schedule. Warrant y may be voided if maintenance schedule is not followed.
SORENTO HYBRID/PLUG-IN HYBRID NORMAL MAINTENANCE SCHEDULE
Check your Maintenance Schedule or schedule an appointment with a dealer using your Kia Connect account by logging into your Kia Access App or your account on https://owners.kia.com
QUICK TIP
© 2022 Kia America, Inc. All rights reserved.
Consumer - Roadside Assistance†11: 1-800-333-4KIA (4542)
Part Number: MQHEV230-PS-004
‡ If equipped†LEGAL DISCL AIMERS ON BACK INSIDE COVER
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Kia Full Synthetic Oil Video
QR CODES
P=Per form R=Replace I=InspectB