garage door opener KIA SPORTAGE HYBRID 2023 Features and Functions Guide

64†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPED
OTHER KEY FEATURES
SPORTAGE HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
OTHER KEYFEATURES
ABC
HomeLink® with Auto-Dimming Rearview Mirror*†2
The HomeLink® Universal Transceiver is designed to connect to your garage door opener, electric gate, home lighting, etc The Auto-Dimming Rearview Mirror is designed to help reduce glare coming from a vehicle’s headlights in the rear HomeLink® with Auto-Dimming Rearview Mirror can connect to three electronic transmitters
REMINDER: Mirror indicator light will illuminate when automatic dimming is ON
Programming a New HomeLink® Button:
1 Press and release the HomeLink® Channel button A, B or C, you would like to program The HomeLink® User Inter face Indicator G will flash orange slowly (If it doesn’t, go to the steps of “Erasing HomeLink® Buttons” section on next page, and start over)
2 Position the garage-door opener remote 1-3 inches away from the HomeLink® buttons
3 While the HomeLink® User Inter face Indicator G is flashing orange, press and hold the garage-door opener remote button until the HomeLink® User Inter face Indicator G changes from orange to green
4 Wait until your garage door comes to a complete stop, regardless of position, before proceeding to the next step
5 Press and release the HomeLink® Channel button A, B or C that you’re programming If the HomeLink® User Interface Indicator G is solid green, HomeLink® is connected and should operate when the HomeLink® Channel button A, B or C is pressed If your device operates, programming is complete
–If the indicator light rapidly flashes green, firmly press, and hold the HomeLink® Channel button A, B or C slowly, for two seconds up to three times in a row, to complete the programming process Do not press the HomeLink® Channel button rapidly If your device now operates, programming is complete
–If the device does not operate, continue with step 6
6 At the garage door opener motor, (security gate motor, etc ) locate the “Learn”, “Smart ”, “Set ” or “Program” button This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the device’s manual to identify this button) The name and color of the button may vary by
manufacturer A ladder and/or second person may simplify the following steps
7 Firmly press and release the “Learn”, “Smart ”, “Set ” or “Program” button You now have up to 30 seconds to complete the next step
8 Return to the vehicle and firmly press and hold the HomeLink® button slowly, for two seconds, up to three
times in a row Do not press the HomeLink® button rapidly As soon as you see the garage door start to move, stop pressing any buttons until a few seconds after the garage door has come to a complete stop, regardless of position At this point programming is complete and your device should operate when the HomeLink® Channel button is pressed
A HomeLink® button
B HomeLink® button
C HomeLink® button
D Garage Door Opener Status Indicator:
Closing or Closed
E HomeLink Operation Indicator
F Garage Door Opener Status Indicator:
Opening or Opened
G HomeLink User Inter face Indicator
EDF(RearviewMirror)
G
For illustrative purposes only Your actual display, but tons and/or features may var y

65†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
OTHER KEY FEATURES
OTHER KEYFEATURES
HomeLink® with Auto-Dimming Rearview Mirror*†2 (continued)
Erasing a Programmed Button:
1 Press and hold the desired HomeLink® Channel button
A, B or C you want to re-program DO NOT release
the button
2 The HomeLink® User Inter face Indicator G will
illuminate solid green Release the button as soon as
the HomeLink® User Inter face Indicator G begins to
flash orange, usually about 20 seconds
3 Proceed with the steps in the “Programming a New
HomeLink® Button” section
For more information, go to HomeLink com or call (800) 355-3515
See section 5 in the Owner ’s Manual for more information
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Homelink® Support Video
QR CODE
•If your garage door opener has the “myQ”†1 9 logo on its side, it has t wo-way communication capabilit y to display “Closing” or “Opening” status message on Homelink® mirror Refer to section 4 in the Owner ’s Manual on how to set this up or for more information
•When programming, park outside of the garage door
•The Star t/Stop but ton needs to be in the accessor y (ACC) position
•Replace the hand-held garage door transmit ter for quicker and accurate programming
QUICK TIPS
For information on how to erase all programmed but tons at the same time, refer to section 4 of the Owner ’s Manual
QUICK TIP
REMINDERS:
•
Erasing programmed but tons will delete all trained transmit ters
•A ladder may be needed to access the garage door opener
•A second person may be needed to help
•Some of the steps are time sensitive
Operating HomeLink®
Press and release the desired programmed HomeLink®
Channel button A, B or C The HomeLink® User Interface Indicator G should light green, solid or flashing, and your programmed device should operate If your device does not operate, the HomeLink® programming was not successful,
and you’ll need to reprogram the button(s)