stop start KIA STONIC 2018 User Guide

WARNING
nParking Brake & Brake FluidWarning Light
Driving the vehicle with a warninglight ON is dangerous. If the ParkingBrake & Brake Fluid Warning Light il‐luminates with the parking brake re‐leased, it indicates that the brakefluid level is low.In this case, have the vehicle inspec‐ted by a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.
Anti-lock Brake System
(ABS) Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with theABS (the normal braking system will
still be operational without the assis‐ tance of the anti-lock brake system).
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Electronic Brake force
Distribution (EBD)
System Warning Light
These two warning lights il‐luminate at the same timewhile driving:
• When the ABS and regular brake system may not
work normally.
In this case, have the vehicle inspec‐ ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
WARNING
nElectronic Brake force Distri‐bution (EBD) system warninglight
(Continued)
(Continued)
When both ABS and Parking Brake &Brake Fluid Warning Lights are on,the brake system will not work nor‐mally and you may experience anunexpected and dangerous situationduring sudden braking.In this case, avoid high speed drivingand abrupt braking.Have the vehicle inspected by a pro‐fessional workshop as soon as possi‐ble. Kia recommends to visit an au‐thorized Kia dealer/service partner.
NOTICE
nElectronic Brake force Distri‐
bution (EBD) system warning
light
When the ABS Warning Light is on or
both ABS and Parking Brake & Brake
Fluid Warning Lights are on, the
speedometer, odometer, or tripme‐
ter may not work. Also, the EPS
Warning Light may illuminate and
(Continued)
Features of your vehicle
4-66

(Continued)
the steering effort may increase or
decrease.
In this case, have the vehicle inspec‐
ted by a professional workshop as
soon as possible.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Electronic Power
Steering (EPS) Warning
Light (if equipped)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - This indicator light comes on after the ignition key is turned to the
ON position and then goes out af‐
ter approximately 3 seconds.
• When there is a malfunction with the EPS.
In this case, have the vehicle inspec‐ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Malfunction Indicator
Lamp (MIL)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It remains on until the engine is started.
• When there is a malfunction with the emission control system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
CAUTION
nMalfunction Indicator Lamp(MIL)
Driving with the Malfunction Indica‐tor Lamp (MIL) on may cause dam‐age to the emission control systemswhich could effect drivability and/orfuel economy.
CAUTION
nGasoline Engine
If the Malfunction Indicator Lamp(MIL) illuminates, potential catalyticconverter damage is possible whichcould result in loss of engine power.In this case, have the vehicle inspec‐ted by a professional workshop assoon as possible.Kia recommends to visit an author‐ized Kia dealer/service partner.
CAUTION
nDiesel Engine
If the Malfunction Indicator Lamp(MIL) blinks, some error related tothe injection quantity adjustmentoccurs which could result in loss ofengine power, combustion noise andpoor emission.In this case, have the engine controlsystem inspected by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.

4-67
4
Features of your vehicle

Charging System
Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It remains on until the engine is started.
• When there is a malfunction with ei‐ ther the alternator or electrical
charging system.
If there is a malfunction with either thealternator or electrical charging sys‐tem:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the alternator drive belt for looseness
or breakage.
In this case, have the vehicle in‐
spected by a professional workshopas soon as possible.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Engine Oil Pressure
Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It remains on until the engine is started.
• When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details,
refer to L

Indicator Lights
Electronic Stability
Control (ESC) Indicator
Light (if equipped)
This indicator light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with the ESC system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
This indicator light blinks:
While the ESC is operating. ❈ For more details, refer to L

This indicator light blinks:
• When there is a malfunction with the immobilizer system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
Immobilizer Indicator
Light (With Smart Key)
This indicator light illumi‐nates for up to 30 seconds:
• When the vehicle detects the smart key in the vehicle properly while the
Engine Start/Stop Button is ACC or
ON. - At this time, you can start the en‐ gine.
- The indicator light goes off after starting the engine.
This indicator light blinks for a few sec‐onds:
• When the smart key is not in the ve‐ hicle.- At this time, you can not start the engine.
This indicator light illuminates for 2seconds and goes off:
• When the vehicle can not detect the smart key which is in the vehiclewhile the Engine Start/Stop Button is
ON.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized Kia dealer/service partner.
This indicator light blinks:
• When the battery of the smart key is weak.- At this time, you can not start the engine. However, you can start the
engine if you press the Engine
Start/Stop Button with the smart
key. (For more details, refer to
L

CAUTION
•Use the power outlet only whenthe engine is running and removethe accessory plug after use. Usingthe accessory plug for prolongedperiods of time with the engine offcould cause the battery to dis‐charge.
•Only use 12V electric accessorieswhich are less than 10A in electriccapacity.
•Adjust the air-conditioner or heat‐er to the lowest operating levelwhen using the power outlet.
•Close the cover when not in use.
•Some electronic devices can causeelectronic interference when plug‐ged into a vehicle’s power outlet.These devices may cause exces‐sive audio static and malfunctionsin other electronic systems or de‐vices used in your vehicle.
•Using electrical products which ex‐ceed the limited capacity mightcause heating to the power outletand wiring that could lead to anelectrical breakdown.
(Continued)
(Continued)
•Always make sure the electricalpart is firmly plugged into thepower outlet. Incomplete pluggingmay cause electrical breakdown.
•Electrical products with a built-inbattery might cause current flow,which could lead to malfunction ofthe electric/ electronic device inyour vehicle. Only use electricalproducts which include reversecurrent prevention.
WARNING
Do not put a finger or a foreign ele‐ment (pin, etc.) into a power outletand do not touch with a wet hand.You may get an electric shock.
USB charger (if equipped)
The USB charger is designed to re‐
charge batteries of small size electrical devices using a USB cable. The electrical
devices can be recharged when the En‐
gine Start/Stop button is in ACC/ON/ START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the USB
port after use. • Some devices are not supported for fast charging but will be charged withnormal speed.
• Use the USB charger when the engine is running to prevent battery dis‐
charge.
Features of your vehicle
4-130

Engine exhaust can be dangerous!........................................ 6-03
Before driving............................................................................ 6-04Before entering vehicle........................................................ 6-04
Necessary inspections..........................................................6-04
Before starting...................................................................... 6-04
Key positions..............................................................................6-06 Ignition switch position........................................................ 6-06
Starting the engine............................................................... 6-07
ENGINE START/STOP button ..................................................6-10 Illuminated ENGINE START/STOP button.......................... 6-10
ENGINE START/STOP button position............................... 6-10
Starting the engine............................................................... 6-12
ISG (Idle Stop and Go) system ............................................... 6-16 Auto stop................................................................................ 6-16
Auto start............................................................................... 6-17
Condition of ISG system operation.................................... 6-18
ISG system deactivation...................................................... 6-18
ISG system malfunction.......................................................6-19
Manual transaxle ......................................................................6-20 Manual transaxle operation................................................ 6-20
Good driving practices.......................................................... 6-22
Automatic transaxle................................................................. 6-24 Automatic transaxle operation...........................................6-24
Good driving practices.......................................................... 6-28
Brake system.............................................................................6-30 Power brakes......................................................................... 6-30
Parking brake......................................................................... 6-31
Anti-lock brake system (ABS) ........................................... 6-34
Electronic stability control (ESC) ....................................... 6-36
Hill-start assist control (HAC) ............................................ 6-39 Vehicle stability management (VSM) ............................... 6-39
ESS : Emergency Stop Signal ............................................. 6-40
Good braking practices.........................................................6-41
Cruise control system ............................................................. 6-43 Cruise control switch............................................................ 6-44
To set cruise control speed:................................................ 6-44
To increase cruise control set speed:................................ 6-46
To decrease the cruising speed:......................................... 6-46
To temporarily accelerate with the cruise control on:.... 6-47
To cancel cruise control, do one of the following:........... 6-47
To resume cruising speed at more than approxi‐
mately 30 km/h (20 mph):.................................................. 6-48
To turn cruise control off, do one of the following:........ 6-49
Speed limit control system .................................................... 6-50 Speed limit control switch................................................... 6-50
To set speed limit:................................................................. 6-50
To turn off the speed limit control, do one of
the following:......................................................................... 6-51
Forward Collision-Avoidance Assist (FCA) System ............. 6-53 System setting and activation............................................6-53
FCA warning message and system control...................... 6-54
Brake operation..................................................................... 6-55
Sensor to detect the distance from the vehicle
in front (front radar)............................................................ 6-56
System malfunction............................................................. 6-57
Limitation of the system..................................................... 6-58
Recognizing pedestrians...................................................... 6-60
Lane Departure Warning (LDW) System .............................. 6-62 Warning indicator.................................................................. 6-64
Driving your vehicle

6

4. If the glow indicator light goes out,turn the ignition switch to the
START position and hold it there
until the engine starts (a maximum
of 10 seconds), then release the
key.
NOTICE
If the engine is not started within 10
seconds after the preheating is com‐
pleted, turn the ignition switch once
more to the LOCK position during 10
seconds, and then to the ON posi‐
tion, in order to preheat again.
Starting and stopping the engine
for turbocharger intercooler
1. Do not race or accelerate the en‐ gine immediately after starting.
If the engine is cold, idle for several
seconds before sufficient lubrica‐
tion is ensured in the turbocharger
unit. 2. After high speed or extended driv‐
ing, requiring a heavy engine load,
idle the engine about 1 minute be‐
fore turning it off.
This idle time will allow the turbo‐ charger to cool prior to shutting off
the engine.
CAUTION
Do not turn off the engine immedi‐ately after it has been subjected to aheavy load. Doing so may cause se‐vere damage to the engine or turbo‐charger unit.

6-09
6
Driving your vehicle

ENGINE START/STOP BUTTON (IF EQUIPPED)
Illuminated ENGINE START/STOP
button
Whenever the front door is opened, the
ENGINE START/STOP button will illumi‐ nate for your convenience. The light will
go off after about 30 seconds when the
door is closed. It will also go off imme‐
diately when the theft-alarm system is
armed.
ENGINE START/STOP button
position
OFF
With manual transaxle
To turn off the engine (START/RUN position) or ve‐
hicle power (ON position), stop the vehicle then press the ENGINE START/STOP button.
With automatic transaxle
To turn off the engine (START/RUN po‐
sition) or vehicle power (ON position),
press the ENGINE START/STOP button with the shift lever in the P (Park) posi‐
tion. When you press the ENGINE
START/STOP button without the shift lever in the P (Park) position, the EN‐
GINE START/STOP button will not
change to the OFF position but to the ACC position.
Also, the steering wheel locks when the
ENGINE START/STOP button is in the
OFF position to protect you against theft. It locks when the door is opened.
Not illuminated
Vehicles equipped with anti-theftsteering column lock
The steering wheel locks when the en‐ gine start/stop button is in the OFF po‐
sition to protect you against theft. It
locks when the door is opened.
If the steering wheel is not locked prop‐ erly when you open the driver's door,
the warning chime will sound. If the
problem is not solved, have the system checked by a professional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
In addition, if the ENGINE START/STOP button is in the OFF position after the
driver's door is opened, the steering
wheel will not lock and the warning chime will sound. In such a situation,
close the door. Then the steering wheel
will lock and the warning chime will stop.
NOTICE
If the steering wheel doesn't unlock
properly, the ENGINE START/STOP
button will not work. Press the EN‐
(Continued)
Driving your vehicle
6-10

(Continued)
GINE START/STOP button while
turning the steering wheel right and
left to release the tension.
•If difficulty is experienced turning
the engine start/stop button to
the ACC position, turn the steering
wheel right and left to release the
tension while pressing the engine
start/stop button.
•When you turn off the engine, the
vehicle should be stopped.
CAUTION
You are able to turn off the engine(START/RUN) or vehicle power (ON),only when the vehicle is not in mo‐tion. In an emergency situation whilethe vehicle is in motion, you are ableto turn the engine off and to theACC position by pressing the enginestart/stop button for more than 2seconds or 3 times successivelywithin 3 seconds. If the vehicle is stillmoving, you can restart the engine
(Continued)
(Continued)
without depressing the brake pedalby pressing the engine start/stopbutton with the shift lever in the N(Neutral) position.
ACC (Accessory)
With manual transaxle
Press the engine start/stop button when the button is
in the OFF position without depressing the clutch pedal.
With automatic transaxle
Press the ENGINE START/STOP button
while it is in the OFF position without depressing the brake pedal.
The steering wheel unlocks and electri‐
cal accessories are operational.
If the ENGINE START/STOP button is in
the ACC position for more than 1 hour, the button is turned off automatically
to prevent battery discharge.
0SBOHF
ON
With manual transaxle
Press the engine start/stop button when the button is
in the ACC position without depressing the clutch pedal.
3FE
With automatic transaxle
Press the ENGINE START/STOP button
while it is in the ACC position without depressing the brake pedal.
The warning lights can be checked be‐
fore the engine is started. Do not leave
the ENGINE START/STOP button in the ON position for a long time. The bat‐
tery may discharge, because the engineis not running.
START/RUN
With manual transaxle
To start the engine, depress the clutch pedal and brake
pedal, then press the engine start/stop button with theshift lever in the N (Neutral) position.
With automatic transaxle
To start the engine, depress the brake
pedal and press the engine start/stop
button with the shift lever in the P (Park) or the N (Neutral) position. For
your safety, start the engine with the
shift lever in the P (Park) position.
/PU
JMMVNJOBUFE

6-11
6
Driving your vehicle