lock LAMBORGHINI GALLARDO 2009 Owners Manual
[x] Cancel search | Manufacturer: LAMBORGHINI, Model Year: 2009, Model line: GALLARDO, Model: LAMBORGHINI GALLARDO 2009Pages: 1659, PDF Size: 95.1 MB
Page 1484 of 1659
48
L714 10 90 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
7 D Q N V H D O W H V W ± O H D N G L D J Q R V L V S X P S / ' 3 V K R U W W U L S G L V S O D \ L Q 0 D V W H U R Q O \ L Q W K H 8 6 Y H U V L R Q
- Function04(default setting)
- Start the short trip with the “Activation” button
- Wait until ³ 6 \ V W R N ´ L V G L V S O D \ H G L Q ¿ H O G
Reed contact status 235 Error message
236 Result238
Text Text Text
Reed open
Reed closed -
Small leak
Considerable leakBreakage Test ON
Test OFF
6 \ V W R N
Syst. not ok
$ F W L Y D W H G F K D U F R D O W D Q N F X W R I I Y D O Y H F K H F N $ $ 9 V K R U W W U L S G L V S O D \ L Q 0 D V W H U R Q O \ L Q W K H 8 6 Y H U V L R Q ' R Q O \
- Function 04(default setting)
- Start the short trip with the “Activation” button
- Wait until ³ 6 \ V W R N ´ L V G L V S O D \ H G L Q ¿ H O G
Reed contact status 1461 Error message
1462Test status1463 Result1464
Text Text Text Text
Reed open
Reed closed -Breakage-
Syst. test Measurement
END measurem. Test ON
Test OFF 6 \ V W R N
Syst. not ok
& K H F N L Q J F \ O L Q G H U E D Q N V H F R Q G D U \ D L U V \ V W H P V K R U W W U L S
- short trips in blocks 034/035 must end with “ok”
- Function
04(default setting)
- Start the short trip with the “Activation” button
3 U H V V W K H E U D N H S H G D O D Q G D W W K H V D P H W L P H S U H V V W K H D F F H O H U D W R U S H G D O W R W K H À R R U W K H U S P L V D X W R P D W L F D O O \ V H W D W U S P : ³ 7 H V W 2 1 ´
- Wait until ³ 6 \ V W R N ´ L V G L V S O D \ H G L Q ¿ H O G
- Short trip can be executed only once with every engine ignition
Engine speed
Q P R W Air mass
P V K I P B Z Cylinder bank 1 / 3 secondary air mass
U P V O Result 239
[1/min] [g/s] [%] Text
ª 1400 Test ON
Test OFF 6 \ V W R N
Syst. not okBreakage
Page 1485 of 1659
49
L714 10 90 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& K H F N L Q J F \ O L Q G H U E D Q N V H F R Q G D U \ D L U V \ V W H P V K R U W W U L S
- short trips in blocks 034/035 must end with “ok”
- Function04(default setting)
- Start the short trip with the “Activation” button
3 U H V V W K H E U D N H S H G D O D Q G D W W K H V D P H W L P H S U H V V W K H D F F H O H U D W R U S H G D O W R W K H À R R U W K H U S P L V D X W R P D W L F D O O \ V H W D W U S P : ³ 7 H V W 2 1 ´
: D L W X Q W L O ³ 6 \ V W 2 . ´ L V G L V S O D \ H G L Q ¿ H O G
- Short trip can be executed only once with every engine ignition
Engine speed Q P R W Air mass
P V K I P B Z Cylinder bank 2 / 4 secondary air mass
U P V O Result 239
[1/min] [g/s] [%] Text
ª 1400 Test ON
Test OFF 6 \ V W R N
Syst. not ok Breakage
( [ K D X V W J D V Y D O Y H G L V S O D \ L Q 0 D V W H U R Q O \ ' R Q O \
Engine speed Q P R W Load U O Exhaust gas valve
% B D E N O
[1/min] [%] Text min: 500
max: 7200 min: 7
max: 100
on
off
6 S H F L D O E O R F N V
, 8 0 3 5 ' L D J Q R V L V I U H T X H Q F \ V W D W L V W L F V R Q O \ L Q W K H 8 6 Y H U V L R Q
Default setting L X P S W N B Z L X P S W N B Z L X P S W N B Z L X P S W N B Z
inactive Mileage IUMPR record number General Denominator Ignition Cycle Counter
active IUMPR record number corresponding CDT Numerator Denominator
086 Ready bit and cycle
5 H D G \ E L W
1=not ended0=ended & \ F O H À D J
1=not ended0=ended & \ F O H À D J
1=not ended0=ended & \ F O H À D J
1=not ended0=ended
Page 1495 of 1659
59
L714 10 90 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
7 K H U P R V W D W G L D J Q R V L V V K R U W W U L S F D Q Q R W E H P D G H ' L V S O D \ L Q 8 6 Y H U V L R Q R Q O \
Engine temperature when diagnosed
P Z W K P B Z Real air mass integral
G L P O H ] W K P Rated air mass integral
V L P O H ] W K P Result1053
[°C] [kg] [kg] Text
Test ON
Test OFF 6 \ V W R N
Syst. not okBreakage
' L U H F W L Q M H F W L R Q
) O R Z F R Q W U R O Y D O Y H 0 6 9 K L J K S U H V V X U H L Q M H F W L R Q S X P S
Using the I X Q F W L R Q ³ ´ , the delivery control valve is disabled and the Rail pressure is lowered to a low pressure level (for repairs on the fuel
system)
Flow control valve closing angle
G Z P V Y V B Z Rated Rail pressure
S U V R O O B Z Real Rail pressure
S U L V W Flow control valve status % B P V Y R I I
[°KW] [bar] [bar] min: 0
max: 220 min: 25
max: 110
, G O H Y D O X H 25 min: 25
max: 120
deactivated
% B P V Y R I I
active % B P V Y D F W
) X H O G H O L Y H U \ V \ V W H P
High pressure system adaptation
S U G U B Z Rail pressure regulator
K G U H U U I B Z Rail pressure system status
G N Y E G H B V
[bar] [mm³]
/ R D G K D Q G O L Q J Y D O Y H / % . V K R U W W U L S D G D S W D W L R Q F \ O L Q G H U E D Q N 0 D V W H U
- Engine at idle conditions
- Function 04 (default setting)
- Start the short trip with the “Activation” button
- Wait until ³ $ ' 3 R N ´ L V G L V S O D \ H G L Q ¿ H O G
Real position load han- dling valve, Master
O E N L V W U B Z Theoretical position load
handling valve
O E N V R O B Z Potentiometer voltage offset value,
Master
X O E N R I I V B Z Adaptation status, Master 514
[%] [%] [V] Text
min: 0
max: 100 min: 0
max: 100min: 0.3
max: 1.5 -ERRORlocked
ADP. ok
ADP. in progress
Page 1496 of 1659
60
L714 10 90 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
' L U H F W L Q M H F W L R Q P R G H
Direct injection mode
E G H P R G B Z
0 homog., oxy. sensor = 1
1 homogeneous, pour
2 homogeneous / layer
3 Layer
4 Layer / cat. Conv. Heat.
5 Free
6 Free
7 Combustion shock protection
/ R D G K D Q G O L Q J Y D O Y H / % . V K R U W W U L S D G D S W D W L R Q F \ O L Q G H U E D Q N 6 O D Y H
- Engine at idle conditions
- Function 04 (default setting)
- Start the short trip with the “Activation” button
: D L W X Q W L O ³ $ ' 3 R N ´ L V G L V S O D \ H G L Q ¿ H O G
Real position load
handling valve - Cylinder
bank 2
O E N L V W U B Z Theoretical position load
handling valve
O E N V R O B Z Potentiometer voltage offset value,
cylinder bank 2
X O E N R I V B Z Adaptation status1710
[%] [%] [V] Text
min: 0
max: 100 min: 0
max: 100min: 3.5
max: 4.7 -ERROR locked
$ ' 3 R N
ADP. in progress
Starter control
6 W D U W H U F R Q W U R O G L V S O D \ L Q 0 D V W H U R Q O \
Starter request terminal 50 % B N O S O Complementary measure-
ment line cl. 50 R
% B N O U Starter relay 1
% B V W V W Starter relay 2 % B V W V W
Text Text Text Text
offon offonoffon offon
6 W D U W H U F R Q W U R O G L V S O D \ L Q 0 D V W H U R Q O \
Interlock switch 6 B S Q N S
Text
off on
Page 1562 of 1659
1
L714 10 92 00
Fig.1
B
A
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
, 0 0 2 % , / , = ( 5 : , 7 + ' 2 : 1 / 2 $ ' $ 1 ' 9 $ 6 3 & / $ 0 % 2 5 * + , 1 , Introduction
The new Gallardo LP 560-4 MY09 is equipped with a modern electronic immobilizer system called “Immobilizer 4 with download”.
This antitheft device blocks vehicle ignition, making its use impossible if a control unit or key are not original or have been tampered with. The Immobilizer 4 system involves the following vehicle components: •the two Master 01 ( A) & Slave 11 ( B) engine control units
• the Immobilizer 25 control unit (integrated in the Kombi 17)
• the ignition keys
A secret code is concealed inside each component. It is processed and recognised at each start-up by the Immobilizer
25 control unit placed inside the instrument cluster (Kombi 17). If the code read on all components involved coincides,
ignition is permitted. In the event the Immobilizer 25 control unit recognises an inconsistency amongst the secret
codes of the vehicle components, power supply to the engine will be immediately cut off after about three seconds
from ignition, and the word SAFE will appear on the instrument cluster display. It will be impossible to start the engine until the inconsistency previously found is resolved.
The VAS PC Lamborghini software must be used for managing replacement of the components involved in the Immobilizer 4 ( Fig.1).
The Immobilizer 25 control unit is an integral part of the Kombi, and therefore cannot be replaced
separately.
The VAS PC Lamborghini software allows the components installed on the vehicle to be synchronized with the virtual
Y H K L F O H F R Q ¿ J X U D W L R Q L Q W K H S U R G X F W L R Q G D W D E D V H 7 R S H U I R U P W K H V \ Q F K U R Q L ] D W L R Q F R Q Q H F W W K H V R I W Z D U H W R W K H Y H K L F O H
using the OBD II outlet and the laptop to the Internet using a network outlet at the same time. In this way, the VAS PC software will be able to exchange information between the vehicle and the production database.
1 R , P P R E L O L ] H U F R G H L Q 2 ) ) / , 1 ( P R G H L V S H U P L W W H G
Page 1584 of 1659
23
L714 10 92 00
Fig.43
Fig.44
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
The Immobilizer code for a replaced control unit can be managed simply by following the instructions displayed on the screen after the right function has been selected.
There are 8 main functions inside the “Guided Functions”, 5 of which are dedicated only to the Immobilizer code (Fig.43 ):
1 Kombi - enable immobilizer / new identity
2 Kombi - vehicle key adaptation, immobilizer IV
3 ECU 01 Master - engine control unit 01 enable immobilizer
4 ECU 11 Slave - engine control unit 11 enable immobilizer
5 ECU 01-11 Engine control units regeneration
6 Kombi - Read measurement value blocks
7 RNSE Interrogate Anti-theft PIN code
1 Kombi - enable immobilizer / new identity
The “1 Kombi – enable immobilizer / new identity” function ( Fig.43) must be used if a new identity has to be given
to the immobilizer because a complete keys & locks kit is replaced or if only the “Kombi 17” has to be replaced (see
example on page 27 “Immobilizer code for Kombi 17 replacement”), so the latter has to be simply adapted to the
existing immobilizer.
It is only when the “New Identity” function is selected that you have to get a new complete keys & locks kit
( Fig.44 ).
Page 1585 of 1659
24
L714 10 92 00
Fig.45
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
2 Kombi - vehicle key adaptation, immobilizer IV
The function “2 Kombi – vehicle key adaptation, immobilizer IV” (Fig.43) is instead used only when the existing keys
have to be adapted to the immobilizer currently in the vehicle. Example: when a customer requests an additional
key.
Only those keys that will be adapted using this procedure can later be used to start the engine. If one of the customer
keys is forgotten, function 2 (key adaptation) must be subsequently launched again and the procedure has to be repeated for all of the keys again.
If the entire complete locks kit has been replaced, it is necessary to give the immobilizer a new identity by
instead selecting “1 Kombi – enable immobilizer / new identity” as indicated in the note ( Fig.45).
The number of keys available will be asked during the key learning procedure (default: 2). Insert each key
in sequence when the tester makes the request.
3 ECU 01 Master - engine control unit 01 enable immobilizer /
4 ECU 11 Slave - engine control unit 01 enable immobilizer
The “3 ECU 01 Master – engine control unit 01 enable immobilizer” and “4 ECU 11 Slave – engine control unit
11 enable immobilizer” functions ( Fig.43) are instead used for replacing engine control units. Carefully follow the
instructions on the screen to complete the procedure.
Exchanging components between one vehicle and another similar vehicle is possible.
: D U Q L Q J L W L V Q R W S R V V L E O H W R H [ F K D Q J H W K H 0 $ 6 7 ( 5 D Q G 6 / $ 9 ( F R Q W U R O X Q L W V H Y H Q E H W Z H H Q W Z R
G L I I H U H Q W Y H K L F O H V , I R Q H F R Q W U R O X Q L W K D V E H H Q F R G H G D V 0 D V W H U I R U W K H L P P R E L O L ] H U L W L V Q R O R Q J H U
S R V V L E O H W R X V H L W D V 6 O D Y H L Q D Q \ F D V H Z K D W V R H Y H U R W K H U Z L V H E R W K H Q J L Q H F R Q W U R O X Q L W V Z L O O K D Y H W R be replaced.
Page 1586 of 1659
25
L714 10 92 00
Fig.46
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
5 ECU 01-11 Engine control units regeneration
The function “5 ECU 01-11 Engine control units regeneration” (Fig. 43) has to be used only when there is an
interruption of communication while assigning a new immobilizer identity to the engine control units. In this case, it is possible to launch a regeneration to align the engine ECUs with the Kombi. 6 Kombi - Read measurement value block
To check the measurements displaying the correct code of the control units / keys, there is the guided function “Read measurement value block” in the Kombi ( Fig.43).
This displays whether or not the control units have been correctly coded, if the keys have been adapted and the total
number of keys recognised. If Immo status displays status 6, the immobilizer is coded correctly. The measurements to strictly take into consideration are on the Kombi ( Fig.46):
• channel 21 column 1 and 2
• channel 22 column 1,2,3 and 4
• channel 23 column 1,3 and 4
Page 1598 of 1659
37
L714 10 92 00
Fig.68
Fig.69
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
14.Select function 1 for Kombi replacement ( Fig.68).
Function 2, on the other hand, must be used if a complete keys + locks kit is replaced to give the
immobilizer a new identity. Function 3 ends the test.
15. Enter customer name/surname ( Fig.69).
Page 1607 of 1659
![LAMBORGHINI GALLARDO 2009 Owners Manual 1
L714 78 07 05
Fig.1
A
B
Fig.2Fig.3
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/img/62/57186/w960_57186-1606.png "LAMBORGHINI GALLARDO 2009 Owners Manual 1
L714 78 07 05
Fig.1
A
B
Fig.2Fig.3
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
1
L714 78 07 05
Fig.1
A
B
Fig.2Fig.3
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Installation of the license plate support
Using this new license plate support it is no longer necessary to drill the front bumper or use adhesive tape W R ¿ W W K H O L F H Q V H S O D W H R Q I U R Q W E X P S H U 7 K L V S U R G X F W D O O R Z W R P D L Q W D L Q W K H I U R Q W E X P S H U D V L Q W D F W D Q G F O H D Q D V
Z K H Q W K H F D U K D V F R P H R X W I U R P W K H I D F W R U \
2 S H U D ] L R Q L S U H O L P L Q D U L
‡ Disassemble the water radiator (front central) grid (080703).
‡ Disassemble the front spoiler (080703)
‡ Disassemble the lock cover (080603 - Reference B2)
$ V V H P E O H W K H ¿ [ L Q J E X V K
Position the license plate support (
1. A-Fig.2) as show in the picture beside ( Fig.2); over the front central grid in
the horizontal surface of the bumper, mark with a indelible marker (pen) the points ( B-Fig.3) where there are the
W K U H H K R O H V W K D W D U H S U H V H Q W R Q W K H ¿ [ L Q J E D U R I W K H O L F H Q V H S O D W H ) L [ L Q J E D U W R ¿ [ W K H license plate to the
bumper.
) U D P H V W R ¿ [ W K H W Z R screws with rubber head
) U R Q W S D U W W R ¿ [ the license plate