buttons Lancia Delta 2008 Owner handbook (in English)

22GETTING TO KNOW YOUR CAR
fig. 7L0E0005m
CONTROL BUTTONS Fig. 7
Õ: to scroll up through the displayed menu and the re-
lated options or to increase the displayed value.
SET: press briefly to access the menu and/or go to next
screen or confirm the required menu option. Hold down
to go back to the standard screen.
Ô: to scroll down through the displayed menu and the re-
lated options or to decrease the value displayed.IMPORTANT Buttons
ÕandÔactivate different func-
tions according to the following situations:
– within the menu, they allow you to scroll up and down
through the options;
- when carrying out settings they allow you to increase
or decrease values.
IMPORTANT When one of the front doors is opened, the
display will turn on and show the clock and km or mi cov-
ered for a few seconds.

GETTING TO KNOW YOUR CAR23
1
SETUP MENU
The menu comprises a series of items which can be se-
lected using the
Õand Ôbuttons to access the different
selection and setting operations (set-up) given in the fol-
lowing paragraphs. Some items also have a sub-menu. The
Set-up Menu is activated by briefly pressing the SET but-
ton.
The menu includes the following items:
– MENU
– LIGHTING
– SPEED BEEP
– HEADLIGHT SENSOR (where provided)
– CORNERING LIGHTS (where provided)
– TRIP B ACTIVATION/INFO
– TIME SETTING
– DATE SETTING– FIRST PAGE (where provided)
– SEE RADIO
– AUTOCLOSE
– UNITS OF MEASUREMENT
– LANGUAGE
– BUZZER VOLUME
– BUTTON VOLUME
– SEAT BELT BEEP/BUZZ.
– SERVICE
– AIR BAG/PASSENGER BAG
– DAYTIME LIGHTS
– EXIT MENU

30GETTING TO KNOW YOUR CAR
Language (Selecting the language)
Messages can be displayed in the following languages: Ital-
ian, German, English, Spanish, French, Portuguese, Dutch.
To set the required language proceed as follows:
– briefly press button SET: the previously set language
starts flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
Buzzer volume (Adjusting the failure/warning
buzzer volume)
With this function the volume of the buzzer accompanying
any failure/warning indication can be adjusted (8 levels).
To adjust the volume proceed as follows:
– briefly press SET: the previously set volume level starts
flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.Button volume (Button volume adjustment)
This function enables you to set the volume of the roger-beep
accompanying the activation of buttons SET,
Õand Ô.
To adjust the volume proceed as follows:
– briefly press SET: the previously set volume level starts
flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
Seat belt beep/buzz.
(Buzzer activation for S.B.R. indication)
This function can only be displayed after a Lancia Deal-
ership has deactivated the S.B.R. system (see paragraph
“S.B.R. system” in chapter 2).
Service (Scheduled servicing)
This function allows you to view information on car ser-
vicing deadlines based on kilometres travelled.

GETTING TO KNOW YOUR CAR39
1
fig. 11L0E0104m
KEY WITH REMOTE CONTROL fig. 11
The key is provided with a metal insert A, which operates:
the ignition switch
the door locks
To open/close the metal insert, press button B.
Button
Ëremotely releases the doors locks.
In this case the timed lighting of interior courtesy lights
and double flashing of direction indicators (for ver-
sions/markets where provided) takes place.
Press button
Ëfor longer than 2 seconds: to open the win-
dows.
Button
Áremotely locks the doors.In this case the interior courtesy lights go out and the di-
rection indicators flash once.
Press button
Áfor longer than 2 seconds: to close the win-
dows.
If one or more door are open, the doors will not be locked.
Button
Rcan be used to open the tailgate remotely.
Tailgate opening is indicated by the double flashing of the
direction indicators; tailgate closing by single flashing (on-
ly with the alarm switched on, where provided).
Button B opens power-assisted opening of metal insert
A.
To reinsert the metal insert into the grip, hold down but-
ton B and turn the insert in the direction shown by the ar-
row until you hear it click into place. Then release but-
ton B.
If the button for locking doors Áis acciden-
tally pressed from the inside, only the doors
opened for getting out of the car are released; the
tailgate remains locked. To realign the system the
locking/unlocking buttons
Á/Ëmust be pressed once
again.

46GETTING TO KNOW YOUR CAR
Height adjustment fig. 16
Operate lever C to raise or lower the rear part of the seat
cushion to improve comfort.
Lumbar adjustment (driver’s seat) fig. 16
for lumbar adjustment, turn knob D.
ELECTRICALLY ADJUSTABLE FRONT SEATS
(where provided) fig. 17
Adjustment is possible when the ignition key is at MAR or
within 1 minute with ignition key at STOP or removed.
When opening one of the front doors, it is possible to ad-
just the seat on the side of the door opened for about 3
minutes or until closing the door.
Seat adjustment controls are the following:
Multifunction control A:
to adjust height;
to move seat backwards or forwards.
Multifunction control B:
back rest angle adjustment;
lumbar adjustment.Seat warming (where provided) fig. 17
With ignition key at MAR, press buttons
Cto switch the
seat warming on/off.
The led on the button will light up when the function is
on.
fig. 17L0E0009m

56GETTING TO KNOW YOUR CAR
Selecting air distribution B-fig. 26
Press one or more buttons
 / / ˙to manually select
one of the 7 possible air distribution settings:
Air flow to the windscreen and front side window
vents to demist/defrost them.
Air flow to the front and rear foot well vents. This
distribution setting rapidly heats the passenger
compartment.

˙Air flow distribution between front/rear vents,
dashboard central/side vents, rear vent, wind-
screen and front side windows demisting vents.

Air flow distribution between foot well vents and
windscreen and front side window demist-
ing/defrosting vents. This distribution setting al-
lows adequate warming of the passenger compart-
ment and prevents the windows from misting up.
˙
Air flow distribution between foot well vents (hot-
ter air) and central/side dashboard vents and rear
vent (cooler air).
˙Air flow distribution between central/side dash-
board vents, rear vent and windscreen and front
side window demisting/defrosting vents. This dis-
tribution setting allows adequate ventilation of the
passenger compartment and prevents the windows
from misting up.
IMPORTANT For the climate control system to function,
one of the following buttons must be operated:
 / /
˙. The system does not allow all buttons  / / ˙to
be switched off.
IMPORTANT Press OFF to restart the climate control sys-
tem: in this way all previously stored operating conditions
are reset before switching off.
To restore automatic air distribution control after a man-
ual selection, press AUTO.

GETTING TO KNOW YOUR CAR57
1
Adjusting the fan speed fig. 26
Operate buttons C
pto increase/decrease the speed of the
fan.
The 12 possible speeds are indicated by bars lighting up
on the display:
max fan speed = all bars lit
min fan speed = one bar lit.
The fan can only be disabled (no bars lit) if the climate
control compressor has been switched off by pressing but-
ton
.
To restore automatic fan speed control after a manual ad-
justment, press AUTO.Aligning the set temperatures
(MONO function) fig. 26
Press button D (MONO) to align the temperature between
the driver side and passenger side.
Then turn the AUTO or MONO knob to increase/decrease
the temperature between the two areas by the same
amount.
Press MONO again to deactivate the function.
Switching off the climate control system fig. 26
Press button E (OFF).
The following information is shown on the display:
the word OFF;
outdoor temperature indication;
indication if air recirculation is switched on (LED on
button
Tlit).

GETTING TO KNOW YOUR CAR85
1
IMPORTANT If the battery is disconnected or the pro-
tection fuse blows, the door opening/closing mechanism
must be reinitialised as follows:
close all the doors;
press button
Áon the key or door locking/unlocking
button
≈on the dashboard;
press button
Ëon the key or door locking/unlocking
button
≈on the dashboard.
If the child lock was engaged and the previ-
ously described locking procedure carried
out, operating the internal handle will not
open the door but will only realign the door lock
knob. To open the door, the outside handle must be
used. The door central locking/unlocking button
≈is not disabled by the engagement of the emer-
gency lock.
ELECTRIC WINDOWS
These operate when the ignition key is turned to MAR and
for about 2 minutes after turning the key to STOP or re-
moving it.
The control buttons are located in the door panels (the
driver-side door panel can be used to operate all the win-
dows).
There is may be anti-crush safety device which starts
working when the front windows are closing.
CONTROLS fig. 54
A. opening/closing left-hand front window; “continuous
automatic” operation during window opening/closing
stage;
B. opening/closing right-hand front window; continu-
ous automatic operation during window open-
ing/closing stage;
C. enabling/disabling of rear door electric window con-
trols;
D. opening/closing left-hand rear window (where pro-
vided); continuous automatic operation during win-
dow opening/closing stage;
E. opening/closing right-hand rear window (where pro-
vided); “continuous automatic” operation during win-
dow opening/closing stage.

86GETTING TO KNOW YOUR CAR
Press the buttons to open/close the required window.
When one of the two buttons is pressed briefly the win-
dow travel takes place in stages; if the button is held
down, continuous automatic operation is activated both
for closing and opening. . If the button is pressed once
again the window will stop in its current position.
Holding the button pressed for a few seconds will auto-
matically raise or lower the window (only with key on
MAR).
Incorrect use of the electric windows may be
dangerous. Before and during operation en-
sure that passengers are not at risk from the
moving glass, either directly or through personal
objects getting caught in the mechanism.
Always remove the ignition key when leav-
ing the car to prevent the electric windows be-
ing operated accidentally and constituting a
danger to the passengers in the car.
Passenger-side front door/rear doors
On the passenger-side front door control panel, and on
some versions also on the rear doors, buttons F-fig. 54 are
provided to control the associated windows
fig. 54L0E0045m