ESP Lancia Flavia 2013 Owner handbook (in English)
[x] Cancel search | Manufacturer: LANCIA, Model Year: 2013, Model line: Flavia, Model: Lancia Flavia 2013Pages: 244, PDF Size: 2.87 MB
Page 169 of 244

NOTE:
The TPMS is not intended to re-
place normal tire care and main-
tenance, or to provide warning of
a tire failure or condition. The TPMS should not be used asa tire pressure gauge while ad-
justing your tire pressure.
Driving on a significantly under-
inflated tire causes the tire to
overheat and can lead to tire fail-
ure. Under-inflation also reduces
fuel efficiency and tire tread life,
and may affect the vehicle’s han-
dling and stopping ability.The TPMS is not a substitute for
proper tire maintenance, and it is
the driver’s responsibility to
maintain correct tire pressure us-
ing an accurate tire pressure
gauge, even if under-inflation has
not reached the level to trigger il-
lumination of the “Tire Pressure
Monitoring Telltale Light.” Seasonal temperature changes will affect tire pressure, and the
TPMS will monitor the actual
tire pressure in the tire. PREMIUM SYSTEM
The Tire Pressure Monitor System
(TPMS) uses wireless technology with
wheel rim mounted electronic sensors
to monitor tire pressure levels. Sen-
sors, mounted to each wheel as part of
the valve stem, transmit tire pressure
readings to the Receiver Module.
NOTE: It is particularly impor-
tant for you to check the tire pres-
sure in all of the tires on your ve-
hicle monthly and to maintain the
proper pressure.
The TPMS consists of the following
components:
1. Receiver Module
2. Four Tire Pressure Monitoring
Sensors
3. Three Trigger Modules (mounted
in three of the four wheel-wells)
4. Various Tire Pressure Monitoring
System Messages, which display in
the Electronic Vehicle Information
Center (EVIC)
5.
Tire Pressure Monitoring Telltale
Light
Tire Pressure Monitoring Low
Pressure Warnings
The “Tire Pressure Monitoring
Telltale Light” will illuminate
in the instrument cluster and a
chime will sound when tire pressure is
low in one or more of the four active
road tires. In addition, the Electronic
Vehicle Information Center (EVIC)
will display a “Inflate Tire to XX”
message for a minimum of five sec-
onds and a graphic showing the pres-
sure values of each tire with the low
tire pressure values flashing. The rec-
ommended cold placard pressure in-
flation value is the pressure value dis-
played in the “Inflate Tire to XX”
message displayed in the EVIC.
Should this occur, you should stop as
soon as possible, and inflate all tires
with low pressure (those flashing in
the EVIC graphic) to the vehicle’s rec-
ommended cold placard pressure
value. Once the system receives the
updated tire pressures, the system will
automatically update, the “Inflate
Tire to XX” message will no longer be
displayed, the graphic display in the
EVIC will stop flashing, and the “Tire
163
Page 171 of 244

Over 40 auto manufacturer's world
wide have issued and endorsed con-
sistent gasoline specifications (the
Worldwide Fuel Charter, WWFC)
which define fuel properties necessary
to deliver enhanced emissions, perfor-
mance, and durability for your ve-
hicle. The manufacturer recommends
the use of gasoline that meets the
WWFC specifications if they are
available.
METHANOL(Methyl or Wood Alcohol) is used in a
variety of concentrations when blended
with unleaded gasoline. You may find
fuels containing 3% or more methanol
along with other alcohols called cosol-
vents. Problems that result from using
methanol/gasoline or E-85 Ethanol
blends are not the responsibility of the
manufacturer. While MTBE is an oxy-
genate made from Methanol, it does not
have the negative effects of Methanol.
CAUTION!Do not use gasolines containing
Methanol or E-85 Ethanol. Use of
these blends may result in starting
and driveability problems and may
damage critical fuel system compo-
nents.ETHANOL
The manufacturer recommends that
your vehicle be operated on fuel con-
taining no more than 10% ethanol.
Purchasing your fuel from a reputable
supplier may reduce the risk of ex-
ceeding this 10% limit and/or of re-
ceiving fuel with abnormal properties.
It should also be noted that an in-
crease in fuel consumption should be
expected when using ethanol-blended
fuels, due to the lower energy content
of ethanol. Problems that result from
using methanol/gasoline or E-85
ethanol blends are not the responsibil-
ity of the manufacturer. While MTBE
is an oxygenate made from Methanol,
it does not have the negative effects of
Methanol.
CAUTION!
Use of fuel with Ethanol content
higher than 10% may result in en-
gine malfunction, starting and op-
erating difficulties, and materials
degradation. These adverse effects
could result in permanent damage
to your vehicle.
CLEAN AIR GASOLINEMany gasolines are now being blended
to contribute to cleaner air, especially in
those areas where air pollution levels are
high. These new blends provide a
cleaner burning fuel and some are re-
ferred to as “reformulated gasoline.”The manufacturer supports these ef-
forts toward cleaner air. You can help
by using these blends as they become
available.
165
Page 181 of 244

WARNING!(Continued)
the vehicle. Always stow the
TIREFIT kit in the place pro-
vided. Failure to follow these
warnings can result in injuries
that are serious or fatal to you,
your passengers, and others
around you.
Take care not to allow the con- tents of TIREFIT to come in con-
tact with hair, eyes, or clothing.
TIREFIT is harmful if inhaled,
swallowed, or absorbed through
the skin: It causes skin, eye, and
respiratory irritation. Flush im-
mediately with plenty of water if
there is any contact with eyes or
skin. Change clothing as soon as
possible, if there is any contact
with clothing.
TIREFIT Sealant solution con-
tains latex. In case of allergic re-
action or rash, consult a physi-
cian immediately. Keep TIREFIT
out of reach of children. If swal-
lowed, rinse mouth immediately
with plenty of water and drink
(Continued)
WARNING!(Continued)
plenty of water. Do not induce
vomiting! Consult a physician
immediately.
Use the gloves provided in the Accessory Storage Compartment
(located on the bottom of the air
pump) when operating the TIRE-
FIT kit.
SEALING A TIRE WITH
TIREFIT
If the sealant (white fluid) does
flow through the Sealant Hose (6):
1.Continue to operate the pump until
sealant is no longer flowing through
hose (typically takes 30 - 70 seconds).
As the sealant flows through the Sealant
Hose (6), the Pressure Gauge (3) can
read as high as 5 Bar. The Pressure
Gauge (3) will decrease quickly from
approximately 70 psi (5 Bar) to the
actual tire pressure when the Sealant
Bottle (1) is empty.
2. The pump will start to inject air
into the tire immediately after the
Sealant Bottle (1) is empty. Continue
to operate the pump and inflate the
tire to the pressure indicated on the
tire pressure label on the driver-side
latch pillar (recommended pressure).
Check the tire pressure by looking at
the Pressure Gauge (3).If the tire does not inflate to at least
1.8 Bar pressure within 15 minutes: The tire is too badly damaged. Do
not attempt to drive the vehicle fur-
ther. Call for assistance.
NOTE: If the tire becomes over-
inflated, press the Deflation But-
ton to reduce the tire pressure to
the recommended inflation pres-
sure before continuing.
If the tire inflates to the recom-
mended pressure or is at least 1.8
Bar pressure within 15 minutes:
1. Press the Power Button (4) to turn
off the TIREFIT kit.
175
Page 205 of 244

CAUTION!
Mixing of engine coolant (anti-freeze) other than specified en-
gine coolant (antifreeze), may re-
sult in engine damage and may
decrease corrosion protection. If a
non-specified engine coolant (an-
tifreeze) is introduced into the
cooling system in an emergency, it
should be replaced with the speci-
fied engine coolant (antifreeze) as
soon as possible.
Do not use plain water alone or
alcohol-based engine coolant (an-
tifreeze) products. Do not use ad-
ditional rust inhibitors or antirust
products, as they may not be com-
patible with the radiator engine
coolant (antifreeze) and may plug
the radiator. This vehicle has not been de- signed for use with Propylene
Glycol based engine coolant (an-
tifreeze). Use of Propylene Glycol
based engine coolant (antifreeze)
is not recommended. Adding Coolant
Your vehicle has been built with an
improved engine coolant (antifreeze)
that allows extended maintenance in-
tervals. This engine coolant (anti-
freeze) can be used up to ten years or
240 000 km before replacement. To
prevent reducing this extended main-
tenance period, it is important that
you use the same engine coolant (an-
tifreeze) throughout the life of your
vehicle.
When adding engine coolant (anti-
freeze):
Use only high purity water such as
distilled or deionized water when
mixing the water/engine coolant (an-
tifreeze) solution. The use of lower
quality water will reduce the amount
of corrosion protection in the engine
cooling system.
Please note that it is the owner's respon-
sibility to maintain the proper level of
protection against freezing according to
the temperatures occurring in the area
where the vehicle is operated.
NOTE: Mixing engine coolant
(antifreeze) types will decrease the
life of the engine coolant (anti-
freeze) and will require more fre-
quent coolant changes.
Cooling System Pressure Cap
The cap must be fully tightened to
prevent loss of engine coolant (anti-
freeze), and to ensure that the engine
coolant (antifreeze) will return to the
radiator from the coolant recovery
bottle.The cap should be inspected and
cleaned if there is any accumulation of
foreign material on the sealing surfaces.WARNING!
The warning words “DO NOT
OPEN HOT” on the cooling sys-
tem pressure cap are a safety pre-
caution. Never add engine cool-
ant (antifreeze) when the engine
is overheated. Do not loosen or
remove the cap to cool an over-
heated engine. Heat causes pres-
sure to build up in the cooling
(Continued)
199
Page 210 of 244

APPEARANCE CARE AND
PROTECTION FROM
CORROSION
Protection Of Body And Paint
From Corrosion
Vehicle body care requirements vary
according to geographic locations and
usage. Chemicals that make roads
passable in snow and ice, and chemi-
cals that are sprayed on trees and road
surfaces during other seasons, are
highly corrosive to the metal in your
vehicle. Outside parking, which ex-
poses your vehicle to airborne con-
taminants, road surfaces on which the
vehicle is operated, extreme hot or
cold weather and other extreme con-
ditions will have an adverse effect on
paint, metal trim, and underbody
protection.
The following maintenance recom-
mendations will enable you to obtain
maximum benefit from the corrosion
resistance built into your vehicle.What Causes Corrosion?
Corrosion is the result of deterioration
or removal of paint and protective
coatings from your vehicle.
The most common causes are:
Road salt, dirt and moisture accu-
mulation.
Stone and gravel impact.
Insects, tree sap and tar.
Salt in the air near seacoast localities. Atmospheric fallout/industrial pol- lutants.
Washing
Wash your vehicle regularly. Al- ways wash your vehicle in the shade
using a mild car wash soap, and
rinse the panels completely with
clear water.
Use a high quality cleaner wax to remove road film, stains and to pro-
tect your paint finish. Take care
never to scratch the paint.
Avoid using abrasive compounds and
power buffing that may diminish the
gloss or thin out the paint finish.
CAUTION!
Do not use abrasive or strong clean-
ing materials such as steel wool or
scouring powder that will scratch
metal and painted surfaces.
Special Care
If you drive on salted or dusty roads or if you drive near the ocean, hose
off the undercarriage at least once a
month.
It is important that the drain holes in the lower edges of the doors,
rocker panels, and trunk be kept
clear and open.
If you detect any stone chips or scratches in the paint, touch them
up immediately. The cost of such
repairs is considered the responsi-
bility of the owner.
If your vehicle is damaged due to a collision or similar cause that de-
stroys the paint and protective
coating, have your vehicle repaired
as soon as possible. The cost of such
repairs is considered the responsi-
bility of the owner.
204
Page 211 of 244

If you carry special cargo such aschemicals, fertilizers, de-icer salt,
etc., be sure that such materials are
well packaged and sealed.
If a lot of driving is done on gravel roads, consider mud or stone
shields behind each wheel.
Use MOPAR® Touch Up Paint or equivalent on scratches as soon as
possible. Your authorized dealer
has touch up paint to match the
color of your vehicle.
Wheel And Wheel Trim Care
All wheels and wheel trim, especially
aluminum and chrome-plated wheels
should be cleaned regularly with a
mild soap and water to prevent corro-
sion. To remove heavy soil and/or ex-
cessive brake dust, use a nonabrasive,
non-acidic cleaner. Do not use scour-
ing pads, steel wool, a bristle brush, or
metal polishes. Do not use oven
cleaner. Avoid automatic car washes
that use acidic solutions or harsh
brushes that may damage the wheels’
protective finish. Interior Care
Interior trim should be cleaned start-
ing with a damp cloth. Do not use
harsh cleaners.
Your leather upholstery can be best
preserved by regular cleaning with a
damp soft cloth. Small particles of
dirt can act as an abrasive and dam-
age the leather upholstery and should
be removed promptly with a damp
cloth. Stubborn soils can be removed
easily with a soft cloth and appropri-
ate products. Care should be taken to
avoid soaking your leather upholstery
with any liquid. Please do not use
polishes, oils, cleaning fluids, sol-
vents, detergents, or ammonia-based
cleaners to clean your leather uphol-
stery. Application of a leather condi-
tioner is not required to maintain the
original condition.
WARNING!
Do not use volatile solvents for
cleaning purposes. Many are poten-
tially flammable, and if used in
closed areas they may cause respi-
ratory harm.Cleaning Headlights
Your vehicle has plastic headlights
that are lighter and less susceptible to
stone breakage than glass headlights.
Plastic is not as scratch resistant as
glass and therefore different lens
cleaning procedures must be followed.To minimize the possibility of scratch-
ing the lenses and reducing light out-
put, avoid wiping with a dry cloth. To
remove road dirt, wash with a mild
soap solution followed by rinsing.Do not use abrasive cleaning compo-
nents, solvents, steel wool or other ag-
gressive material to clean the lenses.Glass Surfaces
All glass surfaces should be cleaned
on a regular basis with any commer-
cial household-type glass cleaner.
Never use an abrasive type cleaner.
Use caution when cleaning the inside
rear window equipped with electric
defrosters or the right rear quarter
window equipped with the radio an-
tenna. Do not use scrapers or other
sharp instruments which may scratch
the elements.
205
Page 224 of 244

ARRANGEMENTS FOR DEALING
WITH THE VEHICLE AT THE
END OF ITS LIFE
LANCIA has been committed for
many years to safeguarding the envi-
ronment through the constant im-
provement of its production processes
and manufacturing products that are
increasingly “eco-compatible”.
To give customers the best possible
service in terms of respecting environ-
mental laws and in response to Euro-
pean Directive 2000/53/EC govern-
ing vehicles at the end of their life,
LANCIA is offering its customers the
opportunity of handing over their ve-
hicle* at the end of its life without
incurring any additional costs.The European Directive sets out that
when the vehicle is handed over the
last keeper or owner should not incur
any expenses as a result of it having a
zero or negative market value.
In all European Union countries, until
1st January 2007, only vehicles regis-
tered after 1st July 2002 were col-
lected free of charge, while since 2007
collection has been free of charge irre-
spective of the year of registration as
long as the vehicle contains its basic
components (in particular, the engine
and bodywork) and has no additional
waste.
To hand your vehicle over at the end
of its life without extra cost, go to one
of our Dealerships or LANCIA-
authorized collection and scrapping
centres.These centres have been carefully
chosen to offer high quality service for
the collection, treatment and recy-
cling of unused vehicles with respect
to the environment.
You can find further information on
these collection and scrapping centres
either from a LANCIA or LANCIA
Commercial Vehicle Dealership or by
calling the freephone number 00800
526242 00 or by going on the
LANCIA website.
(*) Vehicle for transporting passen-
gers with a maximum of nine seats
and a total permitted weight of 3.5 t
218
Page 234 of 244

Oil Change
Interval. . . . . . . . .114, 121, 191
Oil Filler Cap . . . . . . . . . . . .189
Oil Filter . . . . . . . . . . . . . . .192
Oil Selection . . . . . . . . . . . . .216
Oil Synthetic . . . . . . . . . . . .192
Overheating . . . . . . . . . . . . .172
Starting . . . . . . . . . . . . . . . .140
Temperature Gauge . . . . . . . .111
Enhanced Accident Response Feature . . . . . . . . . . . . . . . . . .36
Entry System, Illuminated . . . . . . .16
Ethanol . . . . . . . . . . . . . . . . . .165
Event Data Recorder . . . . . . . . . . .38
Exhaust Gas Caution . . . . . . . . . .48
Exhaust System . . . . . . . . . .48, 196
Exterior Lights . . . . . . . . . . . . . .50
Filler Location Fuel . . . . . . .111, 167
Filters Air Cleaner . . . . . . . . . . . . .192
Air Conditioning . . . . . .136, 194
Automatic Transmission . . . . .203
Engine Oil . . . . . . . . . .192, 216
Engine Oil Disposal . . . . . . . .192
Flashers . . . . . . . . . . . . . . . . . .172
Hazard Warning . . . . . . . . . .172
Turn Signal . . . . . . . .50, 96, 214
Flash-To-Pass . . . . . . . . . . . . . . .96 Flooded Engine Starting
. . . . . . .140
Fluid Capacities . . . . . . . . . . . . .216
Fluid Leaks . . . . . . . . . . . . . . . . .50
Fluid Level Checks Automatic Transmission . . . . .203
Brake . . . . . . . . . . . . . . . . .201
Cooling System . . . . . . . . . . .198
Engine Oil . . . . . . . . . . . . . .191
Power Steering . . . . . . . . . . .153
Fluids, Lubricants and Genuine Parts . . . . . . . . . . . . .216
Fog Lights . . . . . . . . . .95, 115, 214
Fog Light Service . . . . . . . . . . . .214
Freeing A Stuck Vehicle . . . . . . . .182
Fuel . . . . . . . . . . . . . . . . . . . . .164
Adding . . . . . . . . . . . . . . . .167
Additives . . . . . . . . . . . . . . .166
Diesel . . . . . . . . . . . . . . . . .216
Ethanol . . . . . . . . . . . . . . . .165
Filler Cap (Gas Cap) . . .111, 167
Filler Door (Gas Cap) . . . . . .111
Gasoline . . . . . . . . . . . . . . .164
Gauge . . . . . . . . . . . . . . . . .111
Light . . . . . . . . . . . . . . . . . .111
Octane Rating . . . . . . . .164, 216
Requirements . . . . . . . .164, 216
Specifications . . . . . . . . . . . .216
Tank Capacity . . . . . . . . . . .216
Fueling . . . . . . . . . . . . . . . . . . .167 Fuel System Caution
. . . . . . . . . .168
Fuses . . . . . . . . . . . . . . . . . . . .208
Gas Cap (Fuel Filler Cap) . . . . . .167
Gasoline, Clean Air . . . . . . . . . . .165
Gasoline (Fuel) . . . . . . . . . . . . .164
Gauges Coolant Temperature . . . . . . .111
Fuel . . . . . . . . . . . . . . . . . .111
Odometer . . . . . . . . . . . . . . .113
Tachometer . . . . . . . . . . . . .113
Gear Ranges . . . . . . . . . . . . . . .143
Gear Select Lever Override . . . . .183
General Information . . . . . . . . . . .14
General Maintenance . . . . . . . . .190
Glass Cleaning . . . . . . . . . . . . . .205
Hands-Free Phone (Uconnect™) . .67
Hazard Driving Through Flowing, Rising,
or Shallow Standing Water . . .148
Hazard Warning Flasher . . . . . . .172
Headlights . . . . . . . . . . . . . .94, 213
Automatic . . . . . . . . . . . . . . .94
Bulb Replacement . . . . . . . . .213
Cleaning . . . . . . . . . . . . . . .205
Delay . . . . . . . . . . . . . . . . . .95
High Beam . . . . . . . . . . . . . .119
228
Page 235 of 244

High Beam/Low Beam Select
Switch. . . . . . . . . . . . . . . . . .96
Leveling . . . . . . . . . . . . . . . .97
Lights On Reminder . . . . . . . .94
On With Wipers . . . . . . . . .94, 99
Passing . . . . . . . . . . . . . . . . .96
Replacing . . . . . . . . . . . . . . .213
Switch . . . . . . . . . . . . . . . . . .94
Time Delay . . . . . . . . . . . . . .95
Head Restraints . . . . . . . . . . . . . .91
High Beam/Low Beam Select (Dimmer) Switch . . . . . . . . . . .96
Hood Prop . . . . . . . . . . . . . . . . .93
Hood Release . . . . . . . . . . . . . . . .93
Ignition . . . . . . . . . . . . . . . . . . .12
Key . . . . . . . . . . . . . . . . . . . .12
Lock . . . . . . . . . . . . . . . . . . .12
Ignition Key Removal . . . . . . . . . .12
Illuminated Entry . . . . . . . . . . . . .16
Immobilizer (Sentry Key) . . . . . . .13
Infant Restraint . . . . . . . . . . .39, 41
Information Center, Vehicle . . . . .119
Instrument Cluster . . . . . . .110, 111
Instrument Panel and Controls . . .109
Instrument Panel Lens Cleaning . .206
Integrated Power Module (Fuses) . . . . . . . . . . . . . . . . .208
Interior Appearance Care . . . . . . .205Interior Lighting
. . . . . . . . . . . . .96
Intermittent Wipers (Delay Wipers) . . . . . . . . . . . . .98
Introduction . . . . . . . . . . . . . . . . .4
Jump Starting . . . . . . . . . . . . . .179
Key-In Reminder . . . . . . . . . . . . .13
Keyless Entry System (Sedan) . . . .16
Key, Programming . . . . . . . . . . . .14
Key, Replacement . . . . . . . . . . . . .14
Keys . . . . . . . . . . . . . . . . . . . . .12
Key, Sentry (Immobilizer) . . . . . . .13
Knee Bolster . . . . . . . . . . . . . . . .31
Lane Change and Turn Signals . . . . . . . . . . .96, 115, 214
Lane Change Assist . . . . . . . . . . .96
Lap/Shoulder Belts . . . . . . . . . . . .24
Latches . . . . . . . . . . . . . . . . . . .50
Hood . . . . . . . . . . . . . . . . . .93
LATCH (Lower Anchors and Tether for CHildren) . . . . . .43, 44
Latch Plate . . . . . . . . . . . . . . . . .25
Lead Free Gasoline . . . . . . . . . . .164
Leaks, Fluid . . . . . . . . . . . . . . . .50
Leveling, Headlight . . . . . . . . . . .97
Life of Tires . . . . . . . . . . . . . . .159
Light Bulbs . . . . . . . . . . . . .50, 212 Lights
. . . . . . . . . . . . . . . . . .50, 94
Airbag . . . . . . . .34, 37, 49, 112
Automatic Headlights . . . . . . .94
Back-Up . . . . . . . . . . . . . . .214
Battery Saver . . . . . . . . . . . . .97
Brake Assist Warning . . . . . . .156
Brake Warning . . . . . . . . . . .112
Bulb Replacement . . . . . . . . .213
Courtesy/Reading . . . . . . . . . .96
Dimmer Switch,
Headlight . . . . . . . . . . . . .94, 96
Electronic Stability Program
(ESP) Indicator . . . . . . . . . .156
Engine Temperature
Warning . . . . . . . . . . . . . . .112
Exterior . . . . . . . . . . . . . . . . .50
Fog . . . . . . . . . . . .95, 115, 214
Headlight Leveling . . . . . . . . .97
Headlights . . . . . . . . . . . . . . .94
Headlights On Reminder . . . . .94
Headlights On With
Wipers . . . . . . . . . . . . . . .94, 99
Headlight Switch . . . . . . . . . .94
High Beam . . . . . . . . . . . . . . .96
High Beam Indicator . . . . . . .119
High Beam/Low Beam Select . .96
Illuminated Entry . . . . . . . . . .16
Interior . . . . . . . . . . . . . . . . .96
License . . . . . . . . . . . . . . . .215
229