fuel LAND ROVER DEFENDER 1996 Manual Online
[x] Cancel search | Manufacturer: LAND ROVER, Model Year: 1996, Model line: DEFENDER, Model: LAND ROVER DEFENDER 1996Pages: 455, PDF Size: 6.44 MB
Page 452 of 455
88INSTRUMENTS
2
REPAIR FUEL AND TEMPERATURE GAUGE
Service repair no - 88.25.26 - Fuel gauge
Service repair no - 88.25.14 - Temperature gauge
Remove
1.Remove instrument panel
See Instrument
panel
.
2.Release illumination bulb holder and disconnect
electrical leads from gauge.
3.Unscrew knurled nut and remove clamp
securing gauge.
4.Remove earth lead eylet from gauge stud.
5.Withdraw gauge from instrument panel
Refit
6.Fit gauge into instrument panel, locate earth
lead, and secure with clamp.
7.Fit bulb holder and electrical leads.
8.Fit instrument panel
See Instrument panel.CLOCK - FASCIA PANEL
Service repair no - 88.15.07
Remove
1.Remove 4 screws securing instrument panel to
fascia cowl.
2.Pull panel away fom fascia sufficient to
disconnect speedometer cable.
3.Disconnect electrical leads and bulb holder from
clock.
4.Unscrew knurled nut and remove clamp
securing clock.
5.Remove clock from instrument panel.
Refit
6.Fit clock into instrument panel and secure with
clamp.
7.Fit bulb holder and electrical leads.
8.Connect speedometer cable.
9.Secure instrument panel to fascia cowl.
Page 454 of 455
88INSTRUMENTS
4
REPAIR PRINTED CIRCUIT - WARNING LIGHT PANEL
Service repair no - 88.20.20
Remove
1.Remove warning light panel
See Warning light
panel
.
2.Remove 13 illumination bulb holders from light
panel.
3.Release printed circuit from locating pins and
remove from panel seatings.
Refit
4.Fit new printed circuit over panel seatings and
position on locating pins.
5.Fit illumination bulbs to secure circuit.
6.Fit warning light panel
See Warning light
panel
.FUEL GAUGE TANK UNIT - REAR FUEL TANK,
110/130
Service repair no - 88.25.30
WARNING: Ensure that fuel handling
precautions given in Section 01 -
Introduction are strictly adhered to when
carrying out the following instructions.
Remove
1.Disconnect battery.
2.Remove fuel filler cap.
3.Remove tank drain plug, allow fuel to drain into a
clean container, and refit plug.
4.On LH side of tank, disconnect fuel supply pipe
from outlet pipe on fuel gauge unit.
5.Disconnect electrical plug from fuel gauge unit.
6.Release locking ring and withdraw fuel gauge
unit from tank, complete with sealing ring.
Refit
7.Insert gauge unit into tank with float positioned to
base of tank. Fit new sealing washer, if
necessary.
8.Secure gauge unit with locking ring.
9.Fit electrical plug and reconnect fuel supply pipe.
10.Refill fuel tank.
11.Reconnect battery.
Page 455 of 455
INSTRUMENTS
5
REPAIR FUEL GAUGE TANK UNIT - SIDE FUEL TANK
Service repair no - 88.25.31
WARNING: Ensure that fuel handling
precautions given in Section 01 -
Introduction are strictly adhered to when
carrying out the following instructions.
Remove
1.Disconnect battery.
2.Remove RH front seat cushion.
3.Release retaining catch and remove seat base
cover to gain access to fuel tank.
4.Disconnect electrical plug from fuel gauge unit.
5.Release locking ring and withdraw fuel gauge
unit from tank, complete with sealing ring.
Refit
6.Insert gauge unit into tank with float positioned
towards front of tank. Fit new sealing washer, if
necessary.
7.Secure gauge unit with locking ring.
8.Fit electrical plug.
9.Fit seat base cover and seat cushion.
10.Reconnect battery.