radio LAND ROVER FREELANDER 2001 User Guide

HEATING AND VENTILATION
80-2REPAIRS
Controls - heater - from 04MY
$% 80.10.02
Remove
1.Remove the Radio/CD module.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio/CD - from 04MY.
2.Remove 4 screws securing heater controls to
fascia.
3.Move heater control assembly to access
cables.
4.Release air distribution cables from control
knobs and abutments.
5.Disconnect 3 multiplugs from heater control
assembly.
6.Remove heater controls.Refit
1.Fit heater control assembly to vehicle.
2.Connect multiplugs.
3.Connect heater control cables and secure to
abutment with clips.
4.Position heater control panel, fit and tighten
screws.
5.Fit Radio/CD module.
+ IN CAR ENTERTAINMENT,
REPAIRS, Radio/CD - from 04MY.
M80 0578

AIR CONDITIONING
REPAIRS 82-13
Refit
1.Lubricate new 'O' rings, dust shield and
condenser thread with refrigerant oil.
2.Fit 'O' rings and dust shield to receiver drier.
CAUTION: Do not remove receiver/dryer
from packaging until immediately before
installation.
3.Fit receiver drier to condenser and tighten to 12
Nm (9 lbf.ft).
4.Tighten clamps securing receiver drier to
condenser.
5.If fitted, fit air deflector and secure with scrivets.
6. Td4 models: Fit intercooler.

+ FUEL DELIVERY SYSTEM - DIESEL,
REPAIRS, Intercooler.
7. Up to 04MY: Position armature, fit and tighten
4 nuts and bolts securing armature to body to
25 Nm (18 lbf.ft).
8. 04MY on: Position armature, fit bolts securing
armature to crash cans and tighten bolts to 25
Nm (18 lbf.ft).
9. KV6 models: Align PAS fluid cooler and
tighten bolts to 8 Nm (6 lbf.ft).
10.Fit bumper valance.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.
11.Recharge A/C system.

+ AIR CONDITIONING, REFRIGERANT
RECOVERY, RECYCLING AND
RECHARGING, Refrigerant recovery -
recycling and recharge.
12.Connect battery earth lead.
Switch - control
$% 82.20.07
Remove
1.Remove radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
2.Remove 3 heater control knobs.
3.Remove 2 screws securing heater control
finisher to heater controls and remove finisher.
4.Disconnect multiplug from A/C control switch.
5.Remove switch from heater controls.
Refit
1.Fit A/C control switch and connect multiplug.
2.Fit heater control finisher and secure with
screws.
3.Fit heater control knobs.
4.Fit radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.

LIGHTING
86-2-10 REPAIRS
Switch - hazard warning
$% 86.65.50
Remove
1.Remove radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
2.Remove selector knobs from heater controls.
3.Remove 2 screws securing heater control
finisher to heater controls and remove finisher.
4.Release hazard warning switch from heater
controls.
5.Disconnect multiplug and remove hazard
warning switch.
Refit
1.Position hazard warning switch and connect
multiplug.
2.Fit hazard warning switch to heater controls.
3.Fit heater control finisher to heater controls and
secure with screws.
4.Fit heater control knobs.
5.Fit radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
Switch - combined direction indicator/
headlight/horn
$% 86.65.55
Remove
1.Remove steering column nacelle.

+ STEERING, REPAIRS, Nacelle -
column.
2.Disconnect 2 multiplugs from indicator and light
switch.
3.Rotate steering wheel to access switch screws.
4.Remove 2 screws securing switch.
5.Depress retaining tag and remove switch.
Refit
1.Fit indicator and light switch and secure with
screws.
2.Connect multiplugs to switch.
3.Fit steering column nacelle.

+ STEERING, REPAIRS, Nacelle -
column.

WINDOWS
86-5-6 REPAIRS
Switch - backlight heater
$% 86.65.36
Remove
1.Remove radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
2.Remove selector knobs from heater controls.
3.Remove 2 screws securing heater control
finisher to heater controls and remove finisher.
4.Release heated rear screen switch from heater
controls.
5.Disconnect multiplug from heated rear screen
switch and remove switch.Refit
1.Position heated rear screen switch and connect
multiplug.
2.Fit switch to heater control panel.
3.Fit heater control finisher to heater controls and
secure with screws.
4.Fit heater control knobs.
5.Fit radio.
+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.

IN CAR ENTERTAINMENT
REPAIRS 86-6-1
IN CAR ENTERTA INMENT REPAIRS
Radio - up to 04MY
$% 86.50.03
Remove
1. Mid and high line only: Using tool SMD 4091
release radio from centre console.
2.Disconnect multiplugs and aerial from radio
and remove radio.3. Low line only: Using 2.5mm Allen key, loosen
bolts securing radio and release radio from
centre console.
Refit
1.Position radio to facia aperture and connect
multiplugs and aerial.
2.Fit radio to centre console.
3. Low line only: Tighten Allen bolts.
4.Enter security code and check radio cassette
player for correct operation.
M86 6006
SMD 4091
1
23
4
5
6FM
i
M
MODE
M86 6007

IN CAR ENTERTAINMENT
86-6-2 REPAIRS
Radio/CD - from 04MY
$% 86.50.03
Remove
1.Remove centre console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console assembly - front - from
04MY.
2.Remove 4 screws securing the Radio/CD
module to fascia.
3.Release Radio/CD module from fascia,
disconnect multiplug and antenna.
4.Remove the Radio/CD module.Refit
1.Position Radio/CD module to fascia, connect
multiplug and antenna.
2.Align rear of Radio/CD module to guide rail and
fit to fascia.
3.Secure Radio/CD module with screws.
4.Fit centre console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console assembly - front - from
04MY.M86 6115
M86 6171
M86 6116

IN CAR ENTERTAINMENT
86-6-12 REPAIRS
Coaxial lead - extension
$% 86.50.65
Remove
1.Remove radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
2.Disconnect coaxial link lead from aerial lead.
3.Release coaxial link lead from harness.
4.Remove coaxial link lead.
Refit
1.Fit coaxial link lead and secure to harness.
WARNING: Ensure link lead does not foul
control pedals or steering column.
2.Connect link lead to aerial lead.
3.Fit radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.