Discharged battery Lexus CT200h 2011 Owner's Manual (in English)

TABLE OF CONTENTSIndex
6
CT200h_EE (OM76041E)
4-1. Maintenance and care
Cleaning and protecting the
vehicle exterior................. 466
Cleaning and protecting the
vehicle interior ................. 471
4-2. Maintenance
Maintenance requirements . 474
4-3. Do-it-yourself maintenance
Do-it-yourself service
precautions ....................... 477
Hood ................................... 481
Positioning a floor jack ...... 483
Engine compartment .......... 485
12-volt battery .................... 496
Tires ................................... 503
Tire inflation pressure ........ 507
Wheels................................ 509
Air conditioning filter ........ 511
Electronic key battery ........ 515
Checking and replacing
fuses ................................. 520
Light bulbs ......................... 5345-1. Essential information
Emergency flashers ............ 550
If your vehicle needs to be
towed ................................ 551
If you think something is
wrong ............................... 557
5-2. Steps to take in an emergency
If a warning light turns on or a
warning buzzer sounds..... 558
If a warning message is
displayed .......................... 565
If you have a flat tire (vehicles
with a spare tire)............... 586
If you have a flat tire (vehicles
without a spare tire) ......... 600
If the hybrid system will not
start................................... 614
If you lose your keys .......... 616
If the electronic key does not
operate properly ............... 617
If the 12-volt battery is
discharged ........................ 620
If your vehicle overheats .... 627
If the vehicle becomes stuck .....
632
If your vehicle has to be
stopped in an emergency.. 634
4Maintenance and care5When trouble arises

37
1-1. Hybrid system
1
Before driving
CT200h_EE (OM76041E)
Charging the hybrid battery (traction battery)
As the gasoline engine charges the hybrid battery (traction battery), the bat-
tery does not need to be charged from an outside source. However, if the
vehicle is left parked for a long time the hybrid battery will slowly dis-
charge. For this reason, be sure to drive the vehicle at least once every few
months for at least 30 minutes or 16 km (10 miles). If the hybrid battery
becomes fully discharged and you are unable to jump-start the vehicle with
the 12-volt battery, contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional.
Charging the 12-volt battery
P. 6 2 3
After the 12-volt battery has discharged or has been changed or removed
The gasoline engine may not stop even if the vehicle is running on the
hybrid battery (traction battery). If this continues for a few days, contact any
authorized Lexus dealer or repairer, or another duly qualified and equipped
professional.

64
1-3. Opening, closing and locking the doors
CT200h_EE (OM76041E)
Alarms and warning messages
A combination of exterior and interior alarms as well as warning messages
shown on the multi-information display is used to prevent theft of the vehi-
cle and accidents resulting from erroneous operation. Take appropriate mea-
sures in response to any warning message on the multi-information display.
(P. 565)
The following table describes circumstances and correction procedures
when only alarms are sounded.
Security feature
P. 8 1
Battery-saving function
The battery-saving function will be activated in order to prevent the elec-
tronic key battery and the 12-volt battery from being discharged while the
vehicle is not in operation for a long time.
In the following situations, the smart entry & start system may take some
time to unlock the doors.
• The electronic key has been left in an area of approximately 2 m (6 ft.)
of the outside of the vehicle for 10 minutes or longer.
• The smart entry & start system has not been used for 5 days or longer.
AlarmSituationCorrection procedure
Exterior alarm
sounds once for
10 secondsAn attempt was made to
lock the vehicle while a
door was open.Close all of the doors
and lock the doors
again.
Interior alarm
pings repeatedly
The “POWER” switch was
turned to ACCESSORY
mode while the driver’s
door was open (The
driver’s door was opened
when the “POWER”
switch was in ACCES-
SORY d )
Turn the “POWER”
switch off and close
the driver’s door.

186
2-1. Driving procedures
CT200h_EE (OM76041E)
Operating your vehicle in a foreign country
Comply with the relevant vehicle registration laws and confirm the avail-
ability of the correct fuel. (P. 6 4 1 )
For efficient use
Shift the shift position to D when driving.
In the N position, the gasoline engine operates but electricity cannot be
generated. The hybrid battery (traction battery) will discharge, requiring
unnecessary engine power to recharge.
Drive your vehicle smoothly.
Avoid abrupt acceleration and deceleration. Gradual acceleration and
deceleration will make more effective use of the electric motor (traction
motor) without having to use gasoline engine power.
Avoid repeated acceleration.
Repeated acceleration consumes hybrid battery (traction battery) power,
resulting in poor acceleration. Battery power can be restored by driving
with the accelerator pedal slightly released.
Shift the shift position to P when parking.
In the N position, the hybrid battery (traction battery) does not recharge.
Leaving the shift position in the N position for an extended period of
time may discharge the hybrid battery (traction battery). The vehicle
cannot run if the hybrid battery (traction battery) is discharged.
CAUTION
When starting the vehicle
Always keep your foot on the brake pedal while stopped with the hybrid
system operating. This prevents the vehicle from creeping.

210
2-1. Driving procedures
CT200h_EE (OM76041E)
About engine braking
When shift position B is selected, releasing the accelerator pedal will apply
engine braking.
• When the vehicle is driven at high speeds, compared to ordinary gaso-
line-fueled vehicles, the engine braking deceleration is felt less than that
of other vehicles.
• The vehicle can be accelerated even when shift position B is selected.
If the vehicle is driven continuously in the B position, fuel efficiency will
become low. Usually, select the D position.
Automatically P position selection function
When the “POWER” switch is in ON mode while the shift position is in a
position other than P and the vehicle is stopped completely, pressing the
“POWER” switch will cause the automatically P position selection function
to operate together with the “POWER” switch being turned to off.
If the shift position cannot be shifted from P
There is a possibility that the 12-volt battery is discharged. Check the 12-
volt battery in this situation. (P. 620)
Sport mode automatic deactivation
Sport mode is automatically deactivated if the “POWER” switch is turned
off after driving in sport mode.
After recharging/reconnecting the 12-volt battery
P. 4 9 9
Customization
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features P. 655)

5When trouble arises
549
CT200h_EE (OM76041E)
5-1. Essential information
Emergency flashers .......... 550
If your vehicle needs to be
towed.............................. 551
If you think something is
wrong ............................. 5575-2. Steps to take in an
emergency
If a warning light turns on
or a warning buzzer
sounds ............................ 558
If a warning message is
displayed ........................ 565
If you have a flat tire
(vehicles with a spare
tire) ................................ 586
If you have a flat tire
(vehicles without a spare
tire) ................................ 600
If the hybrid system will not
start ................................ 614
If you lose your keys ....... 616
If the electronic key does
not operate properly....... 617
If the 12-volt battery is
discharged ...................... 620
If your vehicle overheats . 627
If the vehicle becomes
stuck............................... 632
If your vehicle has to be
stopped in an
emergency...................... 634

5
551
5-1. Essential information
When trouble arises
CT200h_EE (OM76041E)
If your vehicle needs to be towed
Before towing
The following may indicate a problem with your hybrid transmis-
sion. Contact any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional before towing.
The hybrid system is operating but the vehicle will not move.
The vehicle makes an abnormal sound.
If there is a malfunction in the P position control system, the smart
entry & start system or the immobilizer system, or if the 12-volt
battery is discharged, the vehicle cannot be towed with the front
wheels on the ground, as the front wheels may be locked. In this
case, transport the vehicle with both front wheels or all four wheels
lifted.
If towing is necessary, we recommend having your vehicle towed by
any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional or a commercial towing service, using a lift-
type truck or flat bed truck.
Use a safety chain system for all towing, and abide by all state/provin-
cial and local laws.

614
5-2. Steps to take in an emergency
CT200h_EE (OM76041E)
If the hybrid system will not start
Reasons for the hybrid system not starting vary depending on the situ-
ation. Check the following and perform the appropriate procedure:
The hybrid system will not start even though the correct start-
ing procedure is being followed. (P. 196)
One of the following may be the cause of the problem:
The electronic key may not be functioning properly.
* (P.
617)
There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle.
There may be a malfunction in the immobilizer system.
*
(P. 131)
There may be a malfunction in the P position control sys-
tem.
* (P. 199, 567)
*: It may not be possible to shift the shift position other than P.
The interior lights and headlights are dim, or the horn does not
sound or sounds at a low volume.
One of the following may be the cause of the problem:
The 12-volt battery may be discharged. (P. 496)
The 12-volt battery terminal connections may be loose or

5
615
5-2. Steps to take in an emergency
When trouble arises
CT200h_EE (OM76041E)
Emergency start function
When the hybrid system does not start, the following steps can be
used as an interim measure to start the hybrid system if the
“POWER” switch is functioning normally:
Set the parking brake.
Turn the “POWER” switch to ACCESSORY mode.
Press and hold the “POWER” switch for about 15 seconds
while depressing the brake pedal firmly.
Even if the hybrid system can be started using the above steps, the
system may be malfunctioning. Have the vehicle inspected by any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
The interior lights and headlights do not turn on, or the horn
does not sound.
One of the following may be the cause of the problem:
One or both of the 12-volt battery terminals may be discon-
nected.
The 12-volt battery may be discharged. (P. 496)
Contact any authorized Lexus dealer or repairer, or another duly
qualified and equipped professional if the problem cannot be
repaired, or if repair procedures are unknown.
STEP1
STEP2
STEP3

620
5-2. Steps to take in an emergency
CT200h_EE (OM76041E)
If the 12-volt battery is discharged
The following procedures may be used to start the hybrid system if the
vehicle’s 12-volt battery is discharged.
You can also call any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional.
If you have a set of jumper (or booster) cables and a second
vehicle with a 12-volt battery, you can jump start your vehicle
by following the steps below.
Open the hood and fuse
block cover.
Open the exclusive jump
starting terminal cover.
STEP1
STEP2