navigation system Lexus CT200h 2012 (in English) User Guide

29
CT200h_OM_OM76067E_(EE)
D
Security indicator P. 135, 142
Shift lever P. 207
P position switch P. 210
EV drive mode switch
P. 204Driving mode select switch
P. 209
Seat heater switches
P. 465
Audio system*2 P. 331
: If equipped
*1: Refer to “Navigation System Owner’s Manual”.
*2: For vehicles with a navigation system, refer to “Navigation System Owner’s Man-

49
1
1-1. Hybrid system
Before driving
CT200h_OM_OM76067E_(EE)
Energy monitor/consumption screen
Energy monitor
Navigation system screen (if equipped)
Press the “MENU” button on
the Remote Touch.
You can view the status of your hybrid system on the multi-informa-
tion display and the navigation system screen.
Navigation system screen
(if equipped)
Multi-information display
Remote Touch*
“MENU” button
Remote Touch knob
“ENTER” button
*
: For use of the Remote
Touch, refer to “Naviga-
tion System Owner’s Man-
ual”
STEP1

51
1-1. Hybrid system
1
Before driving
CT200h_OM_OM76067E_(EE)
Navigation system screenMulti-information
display
When the vehicle
is powered by the
electric motor
(traction motor)
When the vehicle
is powered by
both the gasoline
engine and the
electric motor
(traction motor)
When the vehicle
is powered by the
gasoline engine
When the vehicle
is charging the
hybrid
battery (traction
battery)
When there is no
energy flow

52
1-1. Hybrid system
CT200h_OM_OM76067E_(EE)
These images are examples only, and may vary slightly from actual condi-
tions.
Consumption (vehicles with a navigation system)
Press the “MENU” button on the Remote Touch and select “Car”
on the “Menu” screen.
If the “Consumption” screen does not appear, select “Fuel consump-
tion” on the “Energy monitor” screen or “Consumption” on the “Past
record” screen.
Fuel consumption per minute
Regenerated energy per min-
ute
: One symbol indicates 50
Wh.
Cruising range
The image is example only, and may vary slightly from actual condi-
tions.
Hybrid battery
(traction battery)
statusLowFullLowFull
Navigation system screenMulti-information
display

53
1-1. Hybrid system
1
Before driving
CT200h_OM_OM76067E_(EE)
Past record (vehicles with a navigation system)
Press the “MENU” button on the Remote Touch and select “Car”
on the “Menu” screen.
If the “Past record” screen does not appear, select “Fuel consumption”
on the “Energy monitor” screen or “Past record” on the “Consump-
tion” screen.
Best past fuel consumption
Average fuel consumption
Use the displayed average fuel
consumption as a reference.
The image is example only, and may vary slightly from actual condi-
tions.
Resetting the data
Selecting “Clear” on the “Consumption” screen will reset the fuel consump-
tion per minute and regenerated energy per minute.
Selecting “Clear” on the “Past record” screen will reset the best past fuel
consumption and average fuel consumption.
Cruising range
Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.

211
2-1. Driving procedures
2
When driving
CT200h_OM_OM76067E_(EE)
Operation of the air conditioning system in Eco drive mode (without navi-
gation system)
Eco drive mode controls the heating/ cooling operations and fan speed of
the air conditioning system to enhance fuel efficiency. (P. 326) To
improve air conditioning performance, adjust the fan speed or turn off Eco
drive mode.
Operation of the air conditioning system in Eco drive mode (with navigation
system)
Eco drive mode controls the heating/cooling operations and fan speed of the
air conditioning system to enhance fuel efficiency. To improve air condi-
tioning performance, adjust the fan speed or turn off Eco drive mode. (Refer
to the “Navigation System Owner’s Manual”.)
For the shift positions
When the “POWER” switch is off, the shift position cannot be changed.
When the “POWER” switch is in ON mode (the hybrid system is not
operating), the shift position can only be changed to N. The shift position
will be changed to N even if the shift lever is shifted to D or R and held
in that position.
When the “READY” indicator is on, the shift position can be changed
from P to D, N or R.
When the “READY” indicator is flashing, the shift position cannot be
changed from P to another position even if the shift lever is operated.
Wait until the “READY” indicator changes from a flashing to a solid
light, and then operate the shift lever again.
The shift position can only be changed to B directly from D.

273
2-4. Using other driving systems
2
When driving
CT200h_OM_OM76067E_(EE)
Lexus parking assist-sensor
: If equipped
The distance from your vehicle to nearby obstacles when parallel
parking or maneuvering into a garage is measured by the sensors and
communicated via the multi-information display, navigation system
screen (if equipped) and a buzzer. Always check the surrounding area
when using this system.
Types of sensors
Front corner sensors
Rear corner sensors
Rear center sensors
Lexus parking assist-sensor switch
Turns the Lexus parking
assist-sensor on/off
When on, the buzzer sounds
and the indicator light comes
on to inform the driver that
the system is operational.

274
2-4. Using other driving systems
CT200h_OM_OM76067E_(EE)
Display
When the sensors detect an obstacle, a graphic is shown on the
multi information display depending on the position and distance
to the obstacle.
Multi-information display
Front corner sensor operation
Rear corner sensor operation
Rear center sensor operation
Navigation system screen (if equipped)
When the vehicle is moving
forward
A graphic is automatically dis-
played when an obstacle is
detected. The screen can be set
so that the graphic is not dis-
played. (P. 278)
When the vehicle is moving
backward
A simplified image is displayed
on the right upper corner of the
navigation system screen when
an obstacle is detected.

276
2-4. Using other driving systems
CT200h_OM_OM76067E_(EE)Rear center sensors
Detec-
tion
levelMulti-infor-
mation dis-
play
Navigation
system
screen
(insert dis-
play)
Approximate
distance to
obstacle
Buzzer
1
(continuous)(blinking
slowly)
150 to 60 cm
(4.9 to 2.0 ft.)Slow
2
(continuous)(blinking)
60 to 45 cm
(2.0 to 1.5 ft.)Medium
3
(continuous)(blinking
rapidly)
45 to 35 cm
(1.5 to 1.2 ft.)Fast
4
(blinking)(continuous)
35 cm (1.2 ft.)
or lessContinuous

278
2-4. Using other driving systems
CT200h_OM_OM76067E_(EE)
Setting up Lexus parking assist-sensor (vehicles with navigation
system)
You can change the warning beep volume and navigation system
screen operating conditions.
Press the “MENU” button on the Remote Touch.
Select “Setup” on the “Menu” screen.
Select “Vehicle” on the “Setup” screen.
Select “LEXUS park assist” on the “Vehicle settings”
screen.
Alert volume setting
Display on/off
Alert distance setting
Make sure to save after chang-
ing settings.
STEP1
STEP2
STEP3
STEP4
The Lexus parking assist-sensor can be operated when
Front corner sensors:
• The “POWER” switch is in ON mode.
• The shift position is in other than P.
• The vehicle speed is less than about 10 km/h (6 mph).
Rear corner and center sensors:
• The “POWER” switch is in ON mode.
• The shift position is in R.