phone Lexus CT200h 2013 (in English) Owner's Guide

3405-7. Setup menu
CT200h_OM_OM76102E_(EE)
Inputting a phone number using the knob:
STEP2-1 Select “Manual Input” using the knob.
STEP2-2 Input a phone number using the knob, and press the knob
again.
Input the phone number 1 digit at a time.
Selecting a phone number from outgoing or incoming call history:
STEP2-1 Select “Call History” using the knob.
STEP2-2 Select “Outgoing” or “Incoming” using the knob.
STEP2-3 Select the desired data using the knob.
Select “Record Name” using the knob, and say the desired name
after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using the knob.
Select “Confirm” again using the knob.
In , selecting “Speed Dial” instead of “Confirm” registers the newly
added phone number as a speed dial.
Select “Change Name” using the “TUNE•SEL” knob
Select the desired name to be changed using the knob.
Select “Record Name” using the knob, and say the new name after the
beep.
The name to be registered will be repeated aloud.
Select “Confirm” using the knob.
Selecting “List Names” using the “TUNE•SEL” knob. The list of the reg-
istered data will be read aloud.
When listing is complete, the system returns to “Phonebook”.
Pressing the off-hook switch while an entry is being read aloud selects the
entry, and calls the registered phone number.
Changing the registered name in the phone book
Listing the registered data
3
4
5
5
1
2
3
4

3415-7. Setup menu
5
Audio system
CT200h_OM_OM76102E_(EE)
Select “Speed Dial” using the “TUNE•SEL” knob
Select the desired data using the knob.
Select the desired preset button, and register the data into speed dial by
either of the following methods:
a. Press the desired preset button, and select “Confirm” using the knob.
b. Press and hold the desired preset button.
Select “Delete Entry” using the “TUNE•SEL” knob
Select the desired data to be deleted using the knob.
Select “Del Spd Dial” using the “TUNE•SEL” knob.
Press the preset button to which the desired speed dial is registered
after the beep.
The name to be deleted will be heard.
Select “Confirm” using the knob.
Adding an entry to the phonebook
Up to 20 names can be stored.
Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
Setting speed dials
Deleting the registered data
Deleting speed dials
1
2
3
1
2
1
2
3

3445-9. Bluetooth® Phone
CT200h_OM_OM76102E_(EE)
Making a phone call
Making a phone call
Dialing by inputting a name
“Dial by name”
Speed dialing
Dialing a number stored in the outgoing history memory
“Redial”
Dialing a number stored in the incoming history memory
“Call back”
Using the call history memory
Dialing
Storing data in the phone book
Deleting
Press the talk switch and say a registered name.
The desired name or number is displayed.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Select “Dial” using the “TUNE•SEL” knob.
In , if the pronounced name cannot be recognized, select the desired name
using the knob.
Press the off-hook switch.
Press the preset button in which the desired number is registered.
Press the off-hook switch.
Dialing by inputting a name
Speed dialing
1
2
1
1
2
3

3455-9. Bluetooth® Phone
5
Audio system
CT200h_OM_OM76102E_(EE)
Follow the procedure below to use number stored in call history memory:
Press the off-hook switch and select “Redial” (when using a number
stored in the outgoing call history memory) or “Call back” (when using
a number stored in the incoming call history memory) using the
“TUNE•SEL” knob.
Select the desired number using the knob.
The following operations can be performed:
Dialing: Press the off-hook switch or select “Dial” using the knob.
Storing the number in the phone book: Select “Store” and then “Con-
firm” using the knob.
Deleting: Select “Delete” and then “Confirm” using the knob.
Call history
Up to 5 numbers can be stored in each of the outgoing and incoming call history
memories.
Using a call history memory
1
2
3

3465-9. Bluetooth® Phone
CT200h_OM_OM76102E_(EE)
Receiving a phone call
Press the off-hook switch.
Press the on-hook switch.
Answering the phone
Refusing the call

347
5 5-9. Bluetooth® Phone
Audio system
CT200h_OM_OM76102E_(EE)
Speaking on the phone
A call can be transferred between the cellular phone and system while
dialing, receiving a call, or during a call. Use one of the following meth-
ods:
a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the operation of
the phone.
b. Press the off-hook switch*.
*: This operation can be performed only when transferring a call from the cel-
lular phone to the system during a call.
When talking on the phone
Do not talk simultaneously with the other party.
Keep the volume of the received voice down. Otherwise, voice echo will
increase.
Transferring a call

3485-10. Bluetooth®
CT200h_OM_OM76102E_(EE)
Bluetooth®
Conditions under which the system will not operate
If using a cellular phone that does not support Bluetooth®.
If the cellular phone is switched off.
If you are outside service range.
If the cellular phone is not connected.
If the cellular phone’s battery is low.
If the cellular phone is behind the seat or in the glove box or console box
If metal is covering or touching the portable player/phone
Signal status
This display may not correspond exactly with the cellular phone itself.
When using the hands-free system
The audio system and voice guidance are muted when making a call.
If both parties speak at the same time, it may be difficult to hear.
If the incoming call volume is overly loud, an echo may be heard.
Try to face toward the microphone as much as possible when speaking.
In the following circumstances, it may be difficult to hear the other party:
• When driving on unpaved roads
• When driving at high speeds
• When a window is open
• When the air conditioning is blowing directly on the microphone
• When the air conditioning is set to high
When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improperly
accessed. (P. 338)
About Bluetooth®
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.

3495-10. Bluetooth®
5
Audio system
CT200h_OM_OM76102E_(EE)
Compatible models
Portable players must correspond to the following specifications:
Bluetooth®
specifications:
Ver. 1.2, or higher (Recommended: Ver. 2.0+EDR or higher)
Following Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.3 or
higher recommended)
However, please note that some functions may be limited depending on the type
of portable player.
This system supports the following service.
Compatible with HFP (Hands Free Profile) Ver. 1.5 and OPP (Object Push Pro-
file) Ver. 1.1.
If your cellular phone does not support HFP, you cannot enter the Bluetooth
®
phone. If your cellular phone supports OPP alone, you cannot use the Bluetooth®
phone.

3535-10. Bluetooth®
5
Audio system
CT200h_OM_OM76102E_(EE)
WA R N I N G
Caution while driving
Do not use a cellular phone or connect the Bluetooth® phone.
Caution regarding interference with electronic devices
An antenna for the Bluetooth® connection is built in the instrument panel.
People with implantable cardiac pacemakers, cardiac resynchronization ther-
apy-pacemakers or implantable cardioverter defibrillators should maintain a
reasonable distance between themselves and the Bluetooth
® antennas. The
radio waves may affect the operation of such devices.
Before using cellular phones, users of any electrical medical device other than
implantable cardiac pacemakers, cardiac resynchronization therapy-pacemak-
ers or implantable cardioverter defibrillators should consult the manufacturer
of the device for information about its operation under the influence of radio
waves. Radio waves could have unexpected effects on the operation of such
medical devices.
NOTICE
To prevent damage to cellular phones
Do not leave cellular phones in the vehicle. The temperature inside the vehicle
may become high, resulting in damage to the phone.

3555-11. Basic Operations (Lexus Display Audio System)
5
Audio system
CT200h_OM_OM76102E_(EE)
“MENU” screen
To display the “MENU” screen, press the “MENU” button on the control-
ler unit.
ButtonFunction
“Audio”Display the audio top screen
(P. 379, 381, 387, 391, 396, 405)
“Climate”Automatic air conditioning system (P. 442)
“Telephone”Display the phone top screen(P. 419)
“Car” Consumption information (P. 121)
“Info”Display the “Information” screen (P. 433)
“Setup”Setup menu (P. 363)
“Display”Display settings (P. 368)