ESP Lexus CT200h 2015 Navigation Manual (in English)

276
1. VOICE COMMAND SYSTEM OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
XRadio
X Audio
X Info
CommandAction
“Tune to AM”Changes the radio to the specified AM frequency
“Tune to FM”Changes the radio to the specified FM frequency
“Play station”Changes the radio to an FM station of the specified genre
“Tune to FM
HD ”Changes the radio to the specified HD radio station
“Tune to preset ”Changes the radio to the specified preset radio station
“Tune to ”Changes the radio to the satellite radio channel with the
specified name
“Tune to channel ”Changes the radio to the specified satellite radio channel
number
“Play satellite station”Changes the radio to a satellite radio channel of the spec-
ified genre
CommandAction
“Play Playlist ”Plays tracks from the selected playlist
“Play Artist ”Plays tracks from the selected artist
“Play Song ”Plays the selected track
“Play Album ”Plays tracks from the selected album
CommandAction
“Destination Assist”Connects the system to the Lexus Enform with Safety
Connect response center
“Show Forecast”Displays weather information
“Show Traffic”Displays traffic information
“Lexus Insider”Displays the Lexus insider list

278
CT200h_Navi_OM76146U_(U)14.06.17 09:48
2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
1Press and hold this switch until you hear
the beeps.
2The Mobile Assistant can be used only
when the following screen is displayed.
zTo cancel the Mobile Assistant, select
“Cancel” , or press and hold the on the
steering wheel.
z To restart the Mobile Assistant for addi-
tional commands, press the on the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice com-
mand. • After some phone and music commands,
the Mobile Assistant feature will automat-
ically end to complete the requested
action.
The Mobile Assistant feature will
activate Apple’s Siri® Eyes Free mode
via the steering wheel switches. To
operate the Mobile Assistant, a
compatible cellular phone must be
registered and connected to this system
via Bluetooth
®. ( → P.46)
zThe volume of the Mobile Assistant can
be adjusted using the “PWR·VOL” knob
or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
● The available features and functions may
vary based on the iOS version installed
on the connected device.
● Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri will inform you
that the function is not available.
● If Siri is not enable d on the cellular phone
connected via Bluetooth
®, an error mes-
sage will be displayed on the screen.
● While a phone call is active, the Mobile
Assistant cannot be used.
● If using the navigation feature of the cellu-
lar phone, ensure the active audio source
is Bluetooth
® audio or iPod in order to
hear turn by turn direction prompts.

324
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
CT200h_Navi_OM76146U_(U)14.06.17 09:48
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Msg” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is completed.
This operation cannot be performed
while driving.
INFORMATION
●To reset the edited quick reply messages,
select “Default” .
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.

335
2. SETUP
CT200h_Navi_OM76146U_(U)14.06.17 09:48
8
PHONE
1Select “Edit Contacts” .
2Select the desired contact.
3Select corresponding to the de-
sired name or number. X
For editing the name
4Follow the steps in “REGISTERING A
NEW CONTACT TO THE
CONTACT LIST” from “STEP 2”.
(→ P.334)
X For editing the number
4Follow the steps in “REGISTERING A
NEW CONTACT TO THE
CONTACT LIST” from “STEP 3”.
(→ P.334)
EDITING THE CONTACT
DATA
For PBAP compatible Bluetooth
®
phones, this function is available when
“Automatic Contact/History Transfer”
is set to off. ( →P.329)

358
1. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE-OVERVIEW
CT200h_Navi_OM76146U_(U)14.06.17 09:48
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE NAVIGATION SYSTEM
Of the functions included in Lexus Enform with Safety Connect, Destination Assist,
eDestination, and Lexus Insider are achieved through the cooperation of the DCM
and navigation system.
These are subscription-based telematics services that use Global Positioning System
(GPS) data, embedded cellular technology to provide safety and security as well as
convenience features to subscribers.
The services are supported by Lexus’ designated response center, which operates 24
hours per day, 7 days per week.
The services are available by subscription on select, telematics hardware-equipped
vehicles.
No.Name
Lexus’ designated response center
TEL, GPS antenna
DCM
Navigation system

360
1. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE-OVERVIEW
CT200h_Navi_OM76146U_(U)14.06.17 09:48
INFORMATION
●
Exposure to radio frequency signals:
The Lexus Enform with Safety Connect
system installed in your vehicle is a low
power radio transmitter and receiver. The
system receives and also sends out radio
frequency (RF) signals.
●In August 1996, the Federal Communi-
cations Commission (FCC) adopted RF
exposure guidelines with safety levels for
mobile wireless phones. Those guidelines
are consistent with the safety standards
previously set by both U.S. and interna-
tional standards bodies.
• ANSI (American National Standards Institute) C95.1 [1992]
• NCRP (National Council on Radiation Protection and Measurement) Report
86 [1986]
• ICNIRP (International Commission on Non-Ionizing Radiation Protection)
[1996]
●Those standards were based on compre-
hensive and periodic evaluations of the
relevant scientific literature. Over 120
scientists, engineers, and physicians from
universities, government health agen-
cies, and industry reviewed the available
body of research to develop the ANSI
Standard (C95.1).
●The design of Lexus Enform with Safety
Connect complies with the FCC guide-
lines in addition to those standards.
INFORMATION
●
Available beginning Fall 2009 on select
Lexus models. Contact with the Lexus
Enform with Safety Connect response
center is dependent upon the telematics
device being in operative condition, cel-
lular connection availability, navigation
map data, and GPS satellite signal recep-
tion, which can limit the ability to reach
the response center or receive support.
Enrollment and Telematics Subscription
Service Agreement required. A variety of
subscription terms is available; charges
vary by subscription term selected.
●The Lexus Enform with Safety Connect
response center will offer support in mul-
tiple languages.
●Select Lexus Enform with Safety Con-
nect-subscribed vehicles are capable of
communicating vehicle information, trig-
gering owner reminder notifications.
Owners who do not wish to have their
vehicle transmit this information can opt
out of the service at the time of enroll-
ment or by calling 1-800-255-3987 and
follow the prompt for Lexus Enform with
Safety Connect.
●For further details about the service, con-
tact your Lexus dealer.
●Lexus Enform with Safety Connect ser-
vices are not subject to section 255 of
the Telecommunications Act and the
device is not TTY compatible.