washer fluid Lexus ES300 1992 Electrical Components

SECTION 6 – 4
189
SERVICE PROCEDURES AND
SPECIFICATIONS
Electrical components
Specifications190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking battery condition and fluid level
194 . . . . . . . . . . . . . . . . . . .
Battery recharging precautions
196 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing the blade type fuses
196 . . . . . . . . . . . . . . . .
Checking the cartridge type fuses198 . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the windshield wiper blades199 . . . . . . . . . . . . . . . . . . . . . .
Adding washer fluid202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the headlight aim202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing light bulbs203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL COMPONENTS
Beam angle gauge
(vertical movement)
Beam angle gauge
(horizontal movement)
202
ADDING WASHER FLUID
If any washer does not work, the washer tank may be
empty. Add washer fluid.
You may use plain water as washer fluid. However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze. This product is available at
your Lexus dealer and most auto parts stores. Follow the
manufacturer’s directions on how much to mix with water.
NOTICE:
Do not use engine antifreeze or any other substitute
because it may damage your vehicle’s paint.
CHECKING THE HEADLIGHT AIM
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver’s seat and puts the vehicle in
a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.