length Lexus ES300 1997 Seat Belts, Srs And Child Restraints
[x] Cancel search | Manufacturer: LEXUS, Model Year: 1997, Model line: ES300, Model: Lexus ES300 1997Pages: 27, PDF Size: 0.33 MB
Page 2 of 27
COMFORT ADJUSTMENT
64
Keep the belts clean and dry. If they need cleaning,
use a mild soap solution or lukewarm water. Never
use bleach, dye, or abrasive cleaners ± they may
severely weaken the belts.
Replace the belt assembly (including bolts) if it
has been used in a severe impact. The entire
assembly should be replaced even if damage is
not obvious.
Fastening front and rear seat belts
Adjust the seat as needed and sit up straight and well
back in the seat. To fasten your belt, pull it out of the
retractor and insert the tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size and
seat position.The retractor will lock the belt during a sudden stop or on
impact. It may also lock if you lean forward to quickly. A slow,
easy motion will allow the belt to extend, and you can move
around freely.
When a passenger's shoulder belt is completely extended
and is then retracted even slightly, the belt is locked in that
position and cannot be extended. This feature is used to hold
the child restraint system securely. (For details, see ªChild
restraintº on page 76.) To free the belt again, fully retract the
belt and then pull the belt out once more.
If the seat belt cannot be pulled out of the retractor, firmly pull
the belt and release it. You will then be able to smoothly pull
the belt out of the retractor.
CAUTION!
After inserting the tab, make sure the tab and
buckle are locked and tha the belt is not twisted.
Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab
and buckle.
If the seat belt does not function normally,
immediately contact your Lexus dealer. Do not
use the seat until the seat belt is fixed. It cannot
protect an adult occupant or your child from
injury.
Page 4 of 27
COMFORT ADJUSTMENT
66
To release the belt, press the buckle release button and
allow the belt to retract.
If the belt does not retract smoothly, pull it out and check for
kinks or twists. Then make sure it remains untwisted as it
retracts.
Seat belt extender
If the front or rear outside seat belts cannot be fastened
securely because it is not long enough, a personalized seat
extender is available from your Lexus dealer free of charge.
Please contact your local Lexus dealer so that the dealer can
order the proper required length for for the extender. Bring
the heaviest coast you can expect to wear for proper
measurement and selection of length. Additional ordering
information is available at your Lexus dealer.
CAUTION!
When using the seat belt extender, observe the
following. Failure to follow these instructions could
result in less effectiveness of the seat belt restraint
system in case of vehicle accident, increasing the
chance of personal injury.
Never use the seat belt extender if you can fasten
the seat belt without it.
Remember that the extender provided for you
may not be safe when used on a different vehicle,
or for another person or at a different seating
position than the one originally intended for.
To connect the extender to the seat belt, insert the tab
into the seat belt buckle so that the ªPRESSº signs on
the buckle release buttons of the extender and the seat
belt are both facing outward as shown.