overheating Lexus ES300 1997 Starting And Driving

STARTING AND DRIVING
137 Shift into the ªLº position. The transmission will
downshift to the first gear when the vehicle speed is
lower than 55 km/h (34 mph) and maximum engine
braking will be applied.
CAUTION!
Be careful when downshifting on a slippery surface.
The abrupt change in engine speed could cause the
vehicle to spin and skid.
(c) Using the ª2º and ªLº positions
The ª2º and ªLº positions are used for strong engine braking
as described previously.
With the selector lever in ª2º or ªLº, you can start the vehicle
in motion as with the lever in ªDº.
With the selector lever in ª2º, the vehicle will start in the first
gear and automatically shift to the second gear.
With the selector lever in ªLº, the transmission is engaged in
the first gear.
NOTICE
Be careful not to overrev the engine. Watch the
tachometer to keep engine rpm from going into
the red zone. The approximate maximum
allowable speed for each position is given below
for your reference:
Transmission Transfer
ª2º 128 km/h (80 mph)
ªLº 70 km/h (43 mph)
Do not continue hill climbing or hard towing for
a long time in the ª2º or ªLº position. This may
cause severe automatic transmission damage
from overheating. To prevent such damage, ªDº
position should be used in hill climbing or hard
towing.