replace Lexus ES300 1998 s (in English) Owner's Guide

ELECTRICAL COMPONENTS227
64E016

1Type A 2Type B 3Good 4Blown
If there is an overload in the circuits from the battery, the fuses are designed
to blow before the entire wiring harness is damaged.
NOTICE
Before replacing the fuses, have the cause of electrical overload
determined and repaired by your Lexus dealer.
CAUTION
Always use a genuine Lexus fuse or equivalent for
replacement. Never install an ordinary wire ± even for a
temporary fix. This may cause extensive damage and possibly
a fire.
ADDING WASHER FLUID
64E017±1
If the washer tank becomes nearly empty, add washer fluid.
You may use plain water as washer fluid. However, in cold areas where
temperatures range below the freezing point, use washer fluid containing
antifreeze. This product is available at your Lexus dealer and most auto parts
stores. Follow the manufacturer's directions for how much to mix with water.
NOTICE
Do not use engine antifreeze or any other substitute because it may
damage your vehicle's paint.

ELECTRICAL COMPONENTS229
64E020±1

1Arrow head 2Acceptable range
Horizontal movement gauge: The arrow head should not deviate by more
than one mark to either side of the gauge.
If the error is over the value specified above, take the vehicle to your\
Lexus
dealer to adjust the headlight aim.
REPLACING LIGHT BULBS
The illustration on the following pages show the locations of light bulbs. \
If
it is necessary to replace a bulb, take your vehicle to your Lexus dealer \
as soon
as possible. Use bulbs with the bulb numbers and wattage ratings given in\
the
table.
CAUTION
Halogen bulbs have pressurized gas inside and require special
handling. They can burst or shatter if scratched or dropped.
Hold a bulb only by its plastic or metal case. Do not touch the
glass part of a bulb with bare hands.
NOTICE
Only use a bulb of the listed type.