memory Lexus ES300 1998 Owner's Manuals (in English)

7.
PE004±3
PICTORIAL INDEX7
SEAT AND STEERING WHEEL
Page
1 Tilt steering adjustment
lever 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Driving position memory
switch 95
. . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Seat position, seat cushion
angle and height control
switch 58
. . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Seatback angle control switch 59 . . . . . . . .
5 Lumbar support control switch 60 . . . . . . .
For detailed information, refer to the description given in each
section.

SECTION 1 ± 6
56
INSTRUMENTS AND CONTROLS
Comfort adjustment
Front seats57
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunk storage extension 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . .
Head restraints 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . .
Tilt steering wheel 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . .
Outside rear view mirrors 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . .
Inside rear view mirror 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . .
Seat belts 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplemental restraint system (SRS) 69
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . .
Child restraint 80
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . .
Driving position memory system 95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . .

COMFORT ADJUSTMENT95
16E034±1

1Bolt 2Anchor bracket 3Spacer
3. Insert a 15 mm (0.6 in.) spacer, and tighten down the anchor bracket for
your child restraint system with a bolt. Torque the bolt to 16.5 ± 24.7 N´m
(1.68 ±2.52 kgf´m, 12.2 ± 18.2 ft´lbf.).
To comply with Canada Motor Vehicle Safety Standards, vehicles sold in
Canada are provided with a bracket set in the glovebox, designed for use with
the center location.
DRIVING POSITION MEMORY SYSTEM
The micro computer can memorize the position of the driver's seat. Two
different driving position profiles can be entered into the computer's memory.
Recording a driving position in the computer's memory can only be done
when the ignition key is in the ºONº position and the shift lever is i\
n the ºPº
position.
Setting a driving position
16E047
1. Adjust the driver's seat to the desired position.
2. While pushing the ºSETº button, push button º1º or º2º\
until the
signal beeps.
The beep sound means that the positions are recorded in the computer's
memory.

COMFORT ADJUSTMENT
96
By repeating these two steps and pressing the remaining button, the driv\
ing
position for another driver can be recorded.
To set a new memorized position, select the desired position and perform s\
tep
2. The previous memory will be erased and the new position will be set.
To make only slight changes to an already memorized position, the easiest
way is to first activate the memorized position, then make the desired changes\
and perform step 2 above.
Activating a memorized position
16E048
When you push button º1º or º2º, the driving position will be
automatically adjusted to the position recorded for that button.
Conditions for memorized position activation

Ignition key ºONº and shift lever in ºPº position
All parts of the memorized positions can be activated.
However, if the brake pedal is being depressed, the seat position will not
change.
 Key not in ignition switch and within 30 seconds of opening driver's door.
The memorized position can be activated.
If any driving position memory switch is pushed while one of the memorized\
driving position profiles is being activated, the operation will stop.
To activate the system, push the desired button (º1º or º2º)\
again.
The driving position memory control system cannot be operated while the
vehicle is moving.
If the vehicle's battery is disconnected, the computer's memory will be erased
and the memorized positions will have to be set again.

COMFORT ADJUSTMENT97
CAUTION
Do not start the vehicle while the adjustments are being
made.
 Take care not to select the wrong button, or the seat could
strike the rear passenger or hit your body against the
steering wheel. If this happens, you can stop the movement
by pressing another driving position memory switch, or
depressing the brake pedal.

THEFT DETERRENT
100
To stop the alarm: Use either of the following methods.


Unlock the door or trunk using an ignition key or wireless remote control.

Turn the ignition switch on.
Testing the system
1. Open all the windows.
2. Set the system as described above.
The front doors should be locked with the ignition key or wireless remote
control. Be sure to wait until the indicator light starts flashing.
3. Unlock one of the doors from the inside.
The system should activate the alarm.
4. Unlock any of the doors with a key or the wireless remote control to
cancel the system.
5. Repeat this operation for the other doors and hood.
When testing the hood, also check that the system is activated when the batte\
ry
terminal is disconnected and then reconnected.
If the system does not work properly, have it checked by your Lexus dealer.
NOTICE
Disconnecting the battery may result in the erasure of information you
have set in the computer memory. After reconnecting the battery, check
that the memorized data has been retained. If it has been erased, input
it into the computer once more.

AIR CONDITIONING AND AUDIO117
(b) Presetting a station
20E019±1
1. Tune in the desired station.
2. Push one of the station selector buttons ( 1±6 ) and hold it until \
a beep
is heard. This sets the station to the button and the button number ( \
1±6
) appears on the display.
Each button can store one AM station and two FM stations. To change the
preset station to a different one, follow the same procedure.
The preset station memory is cancelled when the power source is interrupted\
by battery disconnection or a blown fuse.
(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the desired station
using one of the following methods.
20E020
Preset tuning: Push the button ( 1±6 ) for the station you want briefly. The
button number ( 1±6 ) and station frequency appear on the display.
Manual tuning:
Push the ºTUNE SEEKº button briefly. Each time you push
the button, the radio will step up or down to another frequency.
Seek tuning: Push the ºTUNE SEEKº button and hold it until you hear a beep.
The radio will begin seeking up or down for a station of the nearest freque\
ncy
and will stop on reception. Each time you push the button, the stations wi\
ll
be searched out one after another.